F.S. RUST FREE 80's BLAZER,PICKUP PARTS, in NH, ME (Military)

Hi
We recently bought some nice US MILITARY SURPLUS CHEVY
1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV)
These are the militarized versions of the standard civilian pickups
and blazers (camo paint, reenforced frames, gun mounts, radio mounts,
24 volt, special towing and lifting equipment).

We are parting some of them out in Southern Maine, and Southern NH.

We have all types of parts available EXCEPT ENGINES
FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL
THESE)
Most of these vehicles are RUST FREE or have very little rust.
We have been selling many parts to restore civilian trucks, or
restore the military version.

PARTS FIT:
1981-87 PICKUPS
1981-90 BLAZERS, SUBURBANS
Some parts can be adapted to other vehicles like AXLES.

SOME PARTS FOR SALE A

1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups.
These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod,
Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT
REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles.
$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS
might be available seperatly.

1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup).
GM 10 bolt (is the front DANA 44?, somwe people have said yes??)
3.08 gears, disk breaks in front, drum in rear. locking hubs.
bent tie rod , only $200.00 set
straight tie rod $250.00 set

GOOD RUST FREE, DENT FREE BODY PARTS (dented for less)
PERFECT FRONT FENDERS $75.00
COMPLETE DOORS WITH GLASS $150.00
RADIATOR SUPPORTS 25.00
PICKUP CABS $300.00 - $500.00
PICKUP TAILGATES $150.00
FRONT GRILL GUARDS (MILITARY) $75.00
FRONT BUMPERS 75.00
REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK)
REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00
STRIPPED BLAZER TAILGATES $100-150.00
RUST FREE PICKUP BEDS WITH DENTS, ASK!
RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS
BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF)
" " " (WITH GLASS $100.00)

Some other parts such as all the military accesories, seats,
instruments, drive train, etc, ASK, ASK, ASK

208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00

We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES,
With assorted other parts, WITH paperwork to register. About
$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS)

Anyway these are a few of the parts we're selling off these vehicles.
remember, rust free parts with dents are less. (rusted stuff going to
scrap pile).

So, just tell us what part you need. and we'll reply.
SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS

Reply to

REMOVE,REMOVE from the return address to reply.

Thanks for your time.
Ron

Hi
UPDATE:
UPDATE:
OOPS, we left out we would really only like to sell the bigger parts
locally (So. NH, So, Maine). But small parts we can ship.
If you need a bunch of parts and it's worth it to load up a pallet, we
can do that and arrange truck shipping (free loading with forklift).
Also if you have any problem replying to email address, try again
or post your problem to list (SPAM blocker might be blocking some
addresses?).
Thanks for Looking
__________________________________________________ _______

We recently bought some nice US MILITARY SURPLUS CHEVY
1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV)
These are the militarized versions of the standard civilian pickups
and blazers (camo paint, reenforced frames, gun mounts, radio mounts,
24 volt, special towing and lifting equipment).

We are parting some of them out in Southern Maine, and Southern NH.

We have all types of parts available EXCEPT ENGINES
FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL
THESE)
Most of these vehicles are RUST FREE or have very little rust.
We have been selling many parts to restore civilian trucks, or
restore the military version.

PARTS FIT:
1981-87 PICKUPS
1981-90 BLAZERS, SUBURBANS
(some parts fit 70's trucks too)
Some parts can be adapted to other vehicles like AXLES.

SOME PARTS FOR SALE A

1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups.
These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod,
Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT
REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles.
$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS
might be available seperatly.

1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup).
GM 10 bolt (is the front DANA 44?, somwe people have said yes??)
3.08 gears, disk breaks in front, drum in rear. locking hubs.
bent tie rod , only $200.00 set
straight tie rod $250.00 set

GOOD RUST FREE, DENT FREE BODY PARTS (dented for less)
PERFECT FRONT FENDERS $75.00
COMPLETE DOORS WITH GLASS $150.00
RADIATOR SUPPORTS 25.00
PICKUP CABS $300.00 - $500.00
PICKUP TAILGATES $150.00
FRONT GRILL GUARDS (MILITARY) $75.00
FRONT BUMPERS 75.00
REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK)
REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00
STRIPPED BLAZER TAILGATES $100-150.00
RUST FREE PICKUP BEDS WITH DENTS, ASK!
RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS
BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF)
" " " (WITH GLASS $100.00)

Some other parts such as all the military accesories, seats,
instruments, drive train, etc, ASK, ASK, ASK

208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00

We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES,
With assorted other parts, WITH paperwork to register. About
$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS)

Anyway these are a few of the parts we're selling off these vehicles.
remember, rust free parts with dents are less. (rusted stuff going to
scrap pile).

So, just tell us what part you need. and we'll reply.
SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS

Reply to

REMOVE,REMOVE from the return address to reply.

Thanks for your time.
Ron

Hi
UPDATE:
UPDATE:
OOPS, we left out we would really only like to sell the bigger parts
locally (So. NH, So, Maine). But small parts we can ship.
If you need a bunch of parts and it's worth it to load up a pallet, we
can do that and arrange truck shipping (free loading with forklift).
Also if you have any problem replying to email address, try again
or post your problem to list (SPAM blocker might be blocking some
addresses?).
Thanks for Looking
__________________________________________________ _______

We recently bought some nice US MILITARY SURPLUS CHEVY
1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV)
These are the militarized versions of the standard civilian pickups
and blazers (camo paint, reenforced frames, gun mounts, radio mounts,
24 volt, special towing and lifting equipment).

We are parting some of them out in Southern Maine, and Southern NH.

We have all types of parts available EXCEPT ENGINES
FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL
THESE)
Most of these vehicles are RUST FREE or have very little rust.
We have been selling many parts to restore civilian trucks, or
restore the military version.

PARTS FIT:
1981-87 PICKUPS
1981-90 BLAZERS, SUBURBANS
(some parts fit 70's trucks too)
Some parts can be adapted to other vehicles like AXLES.

SOME PARTS FOR SALE A

1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups.
These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod,
Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT
REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles.
$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS
might be available seperatly.

1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup).
GM 10 bolt (is the front DANA 44?, somwe people have said yes??)
3.08 gears, disk breaks in front, drum in rear. locking hubs.
bent tie rod , only $200.00 set
straight tie rod $250.00 set

GOOD RUST FREE, DENT FREE BODY PARTS (dented for less)
PERFECT FRONT FENDERS $75.00
COMPLETE DOORS WITH GLASS $150.00
RADIATOR SUPPORTS 25.00
PICKUP CABS $300.00 - $500.00
PICKUP TAILGATES $150.00
FRONT GRILL GUARDS (MILITARY) $75.00
FRONT BUMPERS 75.00
REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK)
REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00
STRIPPED BLAZER TAILGATES $100-150.00
RUST FREE PICKUP BEDS WITH DENTS, ASK!
RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS
BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF)
" " " (WITH GLASS $100.00)

Some other parts such as all the military accesories, seats,
instruments, drive train, etc, ASK, ASK, ASK

208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00

We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES,
With assorted other parts, WITH paperwork to register. About
$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS)

Anyway these are a few of the parts we're selling off these vehicles.
remember, rust free parts with dents are less. (rusted stuff going to
scrap pile).

So, just tell us what part you need. and we'll reply.
SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS

Reply to

REMOVE,REMOVE from the return address to reply.

Thanks for your time.
Ron