A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Corvette
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

update / 84 - blowing out center vent only



 
 
Thread Tools Display Modes
  #1  
Old June 20th 05, 10:09 PM
'Key
external usenet poster
 
Posts: n/a
Default update / 84 - blowing out center vent only

problem did turn out to be a vacuum problem.
just as many here suspected.
the "ac two port check valve" was broken.

thanks to all who responded.
if this n/g had a virtual bar?
I would buy a round for the house.
Zomby-Woof,
yours will be waiting for you at RMH.

g'day
--
"Key"


Ads
  #2  
Old June 21st 05, 12:26 AM
Greg
external usenet poster
 
Posts: n/a
Default

glad you got it fixed,does the g'day mean you are from down under?
On Mon, 20 Jun 2005 21:09:56 GMT, "'Key" > wrote:

>problem did turn out to be a vacuum problem.
>just as many here suspected.
>the "ac two port check valve" was broken.
>
>thanks to all who responded.
>if this n/g had a virtual bar?
>I would buy a round for the house.
>Zomby-Woof,
>yours will be waiting for you at RMH.
>
>g'day


  #3  
Old June 21st 05, 06:44 PM
'Key
external usenet poster
 
Posts: n/a
Default

"Greg" > wrote in message
...
> glad you got it fixed,


me too :-)

> does the g'day mean you are from down under?


No, I am from Louisiana.
I just communicate with a friend in Australia pretty
regular.
The use of "g'day" just became a habit.

Thanks for all of your help Greg
--
"Key"

> On Mon, 20 Jun 2005 21:09:56 GMT, "'Key" >
> wrote:
>
>>problem did turn out to be a vacuum problem.
>>just as many here suspected.
>>the "ac two port check valve" was broken.
>>
>>thanks to all who responded.
>>if this n/g had a virtual bar?
>>I would buy a round for the house.
>>Zomby-Woof,
>>yours will be waiting for you at RMH.
>>
>>g'day

>



  #4  
Old June 25th 05, 12:56 AM
George Csahanin
external usenet poster
 
Posts: n/a
Default

I knew it sounded familiar, now go git drivin' and wavin'

-GeorgeC

"'Key" > wrote in message
...
> problem did turn out to be a vacuum problem.
> just as many here suspected.
> the "ac two port check valve" was broken.
>
> thanks to all who responded.
> if this n/g had a virtual bar?
> I would buy a round for the house.
> Zomby-Woof,
> yours will be waiting for you at RMH.
>
> g'day
> --
> "Key"
>
>
>



  #5  
Old June 25th 05, 02:14 AM
'Key
external usenet poster
 
Posts: n/a
Default

"George Csahanin" > wrote in message
m...
>I knew it sounded familiar, now go git drivin' and wavin'
>
> -GeorgeC


Well, just about time.
Still have a few other problems to deal with first.

--
"Key"

>
> "'Key" > wrote in message
> ...
>> problem did turn out to be a vacuum problem.
>> just as many here suspected.
>> the "ac two port check valve" was broken.
>>
>> thanks to all who responded.
>> if this n/g had a virtual bar?
>> I would buy a round for the house.
>> Zomby-Woof,
>> yours will be waiting for you at RMH.
>>
>> g'day
>> --
>> "Key"
>>
>>
>>

>
>



  #6  
Old June 25th 05, 02:40 PM
Greg
external usenet poster
 
Posts: n/a
Default

On Mon, 20 Jun 2005 21:09:56 GMT, "'Key" > wrote:

>problem did turn out to be a vacuum problem.
>just as many here suspected.
>the "ac two port check valve" was broken.
>
>thanks to all who responded.
>if this n/g had a virtual bar?
>I would buy a round for the house.
>Zomby-Woof,
>yours will be waiting for you at RMH.
>
>g'day

Key can you send me a photo of the way the hood support hooks up on
your 84, i have a 87 and i just can not figure out where and what way
the 84 hood support goes on. if i can not figure it out i will be
forced to bring my broom handle with me every place i go. (grin) Greg
remove the xxx
  #7  
Old June 26th 05, 06:47 AM
'Key
external usenet poster
 
Posts: n/a
Default


"Greg" > wrote in message
...
> On Mon, 20 Jun 2005 21:09:56 GMT, "'Key" >
> wrote:
>
>>problem did turn out to be a vacuum problem.
>>just as many here suspected.
>>the "ac two port check valve" was broken.
>>
>>thanks to all who responded.
>>if this n/g had a virtual bar?
>>I would buy a round for the house.
>>Zomby-Woof,
>>yours will be waiting for you at RMH.
>>
>>g'day

> Key can you send me a photo of the way the hood support
> hooks up on
> your 84, i have a 87 and i just can not figure out where
> and what way
> the 84 hood support goes on. if i can not figure it out i
> will be
> forced to bring my broom handle with me every place i go.
> (grin) Greg
> remove the xxx


I would if I had my car here and still had a digital camera.
My car is still at the shop
and my digital camera went south on me.
I will try and see if I can borrow a digital and go by the
shop and take a few pics.
It will be Monday, if I can borrow a digital.
(I should get of my tight a*s and buy another digital)
(just not very high on my to do list right now)
later
--
"Key"


  #8  
Old June 26th 05, 11:24 AM
Greg
external usenet poster
 
Posts: n/a
Default

thanks Key, the supercharger is in the way of the hood support, just
about have it ready to go, mounting the intercooler and some gauges
and i will be done except for the hood support, it looks like i am
going to have to bond a metal panel to the hood before i can mount it.
Greg
On Sun, 26 Jun 2005 05:47:03 GMT, "'Key" > wrote:

>
>"Greg" > wrote in message
.. .
>> On Mon, 20 Jun 2005 21:09:56 GMT, "'Key" >
>> wrote:
>>
>>>problem did turn out to be a vacuum problem.
>>>just as many here suspected.
>>>the "ac two port check valve" was broken.
>>>
>>>thanks to all who responded.
>>>if this n/g had a virtual bar?
>>>I would buy a round for the house.
>>>Zomby-Woof,
>>>yours will be waiting for you at RMH.
>>>
>>>g'day

>> Key can you send me a photo of the way the hood support
>> hooks up on
>> your 84, i have a 87 and i just can not figure out where
>> and what way
>> the 84 hood support goes on. if i can not figure it out i
>> will be
>> forced to bring my broom handle with me every place i go.
>> (grin) Greg
>> remove the xxx

>
>I would if I had my car here and still had a digital camera.
>My car is still at the shop
>and my digital camera went south on me.
>I will try and see if I can borrow a digital and go by the
>shop and take a few pics.
>It will be Monday, if I can borrow a digital.
>(I should get of my tight a*s and buy another digital)
> (just not very high on my to do list right now)
>later


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dodge Neon blowing fuses UPDATE!!! Eightupman Dodge 3 February 15th 05 12:41 AM
Dim Message Center. 02 Dave Hollis & Penny Williams Ford Explorer 4 January 15th 05 06:45 PM
SES light came on, lw300 - update Oppie Saturn 2 August 30th 04 08:42 PM
vent replacement Alan D. Falk Audi 3 August 24th 04 03:46 PM


All times are GMT +1. The time now is 01:11 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.