If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
update / 84 - blowing out center vent only
problem did turn out to be a vacuum problem.
just as many here suspected. the "ac two port check valve" was broken. thanks to all who responded. if this n/g had a virtual bar? I would buy a round for the house. Zomby-Woof, yours will be waiting for you at RMH. g'day -- "Key" |
Ads |
#2
|
|||
|
|||
glad you got it fixed,does the g'day mean you are from down under?
On Mon, 20 Jun 2005 21:09:56 GMT, "'Key" > wrote: >problem did turn out to be a vacuum problem. >just as many here suspected. >the "ac two port check valve" was broken. > >thanks to all who responded. >if this n/g had a virtual bar? >I would buy a round for the house. >Zomby-Woof, >yours will be waiting for you at RMH. > >g'day |
#3
|
|||
|
|||
"Greg" > wrote in message
... > glad you got it fixed, me too :-) > does the g'day mean you are from down under? No, I am from Louisiana. I just communicate with a friend in Australia pretty regular. The use of "g'day" just became a habit. Thanks for all of your help Greg -- "Key" > On Mon, 20 Jun 2005 21:09:56 GMT, "'Key" > > wrote: > >>problem did turn out to be a vacuum problem. >>just as many here suspected. >>the "ac two port check valve" was broken. >> >>thanks to all who responded. >>if this n/g had a virtual bar? >>I would buy a round for the house. >>Zomby-Woof, >>yours will be waiting for you at RMH. >> >>g'day > |
#4
|
|||
|
|||
I knew it sounded familiar, now go git drivin' and wavin'
-GeorgeC "'Key" > wrote in message ... > problem did turn out to be a vacuum problem. > just as many here suspected. > the "ac two port check valve" was broken. > > thanks to all who responded. > if this n/g had a virtual bar? > I would buy a round for the house. > Zomby-Woof, > yours will be waiting for you at RMH. > > g'day > -- > "Key" > > > |
#5
|
|||
|
|||
"George Csahanin" > wrote in message
m... >I knew it sounded familiar, now go git drivin' and wavin' > > -GeorgeC Well, just about time. Still have a few other problems to deal with first. -- "Key" > > "'Key" > wrote in message > ... >> problem did turn out to be a vacuum problem. >> just as many here suspected. >> the "ac two port check valve" was broken. >> >> thanks to all who responded. >> if this n/g had a virtual bar? >> I would buy a round for the house. >> Zomby-Woof, >> yours will be waiting for you at RMH. >> >> g'day >> -- >> "Key" >> >> >> > > |
#6
|
|||
|
|||
On Mon, 20 Jun 2005 21:09:56 GMT, "'Key" > wrote:
>problem did turn out to be a vacuum problem. >just as many here suspected. >the "ac two port check valve" was broken. > >thanks to all who responded. >if this n/g had a virtual bar? >I would buy a round for the house. >Zomby-Woof, >yours will be waiting for you at RMH. > >g'day Key can you send me a photo of the way the hood support hooks up on your 84, i have a 87 and i just can not figure out where and what way the 84 hood support goes on. if i can not figure it out i will be forced to bring my broom handle with me every place i go. (grin) Greg remove the xxx |
#7
|
|||
|
|||
"Greg" > wrote in message ... > On Mon, 20 Jun 2005 21:09:56 GMT, "'Key" > > wrote: > >>problem did turn out to be a vacuum problem. >>just as many here suspected. >>the "ac two port check valve" was broken. >> >>thanks to all who responded. >>if this n/g had a virtual bar? >>I would buy a round for the house. >>Zomby-Woof, >>yours will be waiting for you at RMH. >> >>g'day > Key can you send me a photo of the way the hood support > hooks up on > your 84, i have a 87 and i just can not figure out where > and what way > the 84 hood support goes on. if i can not figure it out i > will be > forced to bring my broom handle with me every place i go. > (grin) Greg > remove the xxx I would if I had my car here and still had a digital camera. My car is still at the shop and my digital camera went south on me. I will try and see if I can borrow a digital and go by the shop and take a few pics. It will be Monday, if I can borrow a digital. (I should get of my tight a*s and buy another digital) (just not very high on my to do list right now) later -- "Key" |
#8
|
|||
|
|||
thanks Key, the supercharger is in the way of the hood support, just
about have it ready to go, mounting the intercooler and some gauges and i will be done except for the hood support, it looks like i am going to have to bond a metal panel to the hood before i can mount it. Greg On Sun, 26 Jun 2005 05:47:03 GMT, "'Key" > wrote: > >"Greg" > wrote in message .. . >> On Mon, 20 Jun 2005 21:09:56 GMT, "'Key" > >> wrote: >> >>>problem did turn out to be a vacuum problem. >>>just as many here suspected. >>>the "ac two port check valve" was broken. >>> >>>thanks to all who responded. >>>if this n/g had a virtual bar? >>>I would buy a round for the house. >>>Zomby-Woof, >>>yours will be waiting for you at RMH. >>> >>>g'day >> Key can you send me a photo of the way the hood support >> hooks up on >> your 84, i have a 87 and i just can not figure out where >> and what way >> the 84 hood support goes on. if i can not figure it out i >> will be >> forced to bring my broom handle with me every place i go. >> (grin) Greg >> remove the xxx > >I would if I had my car here and still had a digital camera. >My car is still at the shop >and my digital camera went south on me. >I will try and see if I can borrow a digital and go by the >shop and take a few pics. >It will be Monday, if I can borrow a digital. >(I should get of my tight a*s and buy another digital) > (just not very high on my to do list right now) >later |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dodge Neon blowing fuses UPDATE!!! | Eightupman | Dodge | 3 | February 14th 05 11:41 PM |
Dim Message Center. 02 | Dave Hollis & Penny Williams | Ford Explorer | 4 | January 15th 05 05:45 PM |
SES light came on, lw300 - update | Oppie | Saturn | 2 | August 30th 04 08:42 PM |
vent replacement | Alan D. Falk | Audi | 3 | August 24th 04 03:46 PM |