If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
"ymenard" > schrieb im Newsbeitrag
.. . > >"Asgeir Nesoen" > wrote >> What is the point in having a hyperstim? What does it add to the >> experience? > > > Well that's like "What's the point in having a Mercedes?" It adds nothing > at going from point A to point B. > > > The idea of the hyperstim was good 5 years ago, but nowadays its much > easier to do a DIY kit with a solid FF wheel. So what about this: http://www.racebasecockpit.com/ . There are DIY-kits available also. Any experience here at ras with a Racebase? Are there any DIY-tutorials on the net? > -- > -- François Ménard <ymenard> > -- This announcement is brought to you by the Shimago-Dominguez > Corporation - helping America into the New World... Regards Stephan |
Ads |
#12
|
|||
|
|||
"JML" > wrote in :
> Hi, looking for experiences from someone who has driven Hyper > Stimulator in race centre or other locations? > > Here`s a link what I mean: > >http://www.hyperstimulator.com/ Excellent seating position, very immersive, didn't like the feel of their steering wheel, the best brake feel/pedal system and I've ever experienced, very expensive for what you get. Don |
#13
|
|||
|
|||
On Sun, 18 Sep 2005 13:37:12 GMT, "JML" > wrote:
>Hi, looking for experiences from someone who has driven Hyper Stimulator in >race centre or other locations? > >Here`s a link what I mean: > >http://www.hyperstimulator.com/ > Taking the opposite tack from what everyone else in the thread is discussing...isn't there a US company (since the above guys have no US centers at the moment) who do something similar-a room full of these sims and some awesome mano-on-mano driving action? I much prefer being in the same room as your fellow drivers, all other things being equal of course... |
#14
|
|||
|
|||
On Mon, 19 Sep 2005 14:14:06 GMT, no@email (Remco Moedt) wrote:
> I replaced >mine with high end Spectrol pots, about 4 years ago, and still no >jitter. > >Cheers! > > >Remco Which ones did you use, Remco? The 100k? thx Jeff |
#15
|
|||
|
|||
On Mon, 26 Sep 2005 16:29:05 -0500, Jeff Haas
> wrote: >On Mon, 19 Sep 2005 14:14:06 GMT, no@email (Remco Moedt) wrote: > >> I replaced >>mine with high end Spectrol pots, about 4 years ago, and still no >>jitter. >> >>Cheers! >> >> >>Remco > >Which ones did you use, Remco? The 100k? No, 50k, which was the maximum available. http://www.nteinc.com/pot_web/357.html Cheers! Remco |
Thread Tools | |
Display Modes | |
|
|