If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Snow plows for small 4x4's?
Snow plows for small 4x4's?
I am going to either build a snow plow or purchase one. And put it on the front of a Jeep or an older K5 Blazer that I have access to. I was over at the store and there was a guy and his wife plowing snow in a Dodge 4x4 diesel, long box and extended cab. I asked him how much he was making and he said if he hustled, he could make about $200.00/hr. Damn good money, if that is true??? I will have to ask around. 12 hours of plowing at that rate would equal $2400.00. 24 hours would equal $4800.00, before expenses. We have 18" of snow here right now and these guys are working around the clock. Something to consider for next year. Any one know of any plans available on the web for building a small plow unit for a small vehicle, such as a Jeep or a K5 Blazer or a Ford Bronco? I would like to keep the blade no longer that 6.5 feet wide. I like the idea of the small vehicle for being able to maneuvered easily in small areas. The weight of the vehicle should be no problem. If it's too light, I could weld in steel plates to the interior of the vehicle to offer it more traction. And I could strip out the interior of seats and carpet to do this. I noticed a lot of the guys plowing in 4x4 pickups had their boxes loaded with snow for added traction. I did not see many 'plowers' using chains at all, most likely as chains wear quickly on roads that have been cleared and are salted and sanded. Also, any reconditions for tires and gear deferential(s) for this specific application? Any help or ideas here would be appreciated. Thanks in advance. I would like to get this set up for next year. |
Ads |
#2
|
|||
|
|||
On Sun, 16 Jan 2005 17:13:15 -0800, > wrote:
>:|Snow plows for small 4x4's? >:| >:|I am going to either build a snow plow or purchase one. And put it on the >:|front of a Jeep or an older K5 Blazer that I have access to. I was over at >:|the store and there was a guy and his wife plowing snow in a Dodge 4x4 >:|diesel, long box and extended cab. we've got one of those at work... horrible plow truck, the 900 ft turning radius really makes it a bear to plow with. I asked him how much he was making and he >:|said if he hustled, he could make about $200.00/hr. Damn good money, if that >:|is true??? I will have to ask around. that seems to be a bit exagerated to me or he's got some really dumb clients. going rate around here for a simple driveway is $20 a storm that takes 10 mins max to plow. so unless they're charging a stupidly high rate, $120/hr is possible only if there is no travel time between jobs. >:| >:|12 hours of plowing at that rate would equal $2400.00. 24 hours would equal >:|$4800.00, before expenses. We have 18" of snow here right now and these guys >:|are working around the clock. Something to consider for next year. sounds like a Kirby sales hiring pitch... the reality is usually far far lower than the maximum possible earnings. >:| >:|Any one know of any plans available on the web for building a small plow >:|unit for a small vehicle, such as a Jeep or a K5 Blazer or a Ford Bronco? >:| no, but the easiest thing is to drive around and look at used plows for sale... I know of several in my area for sale between $200 and $500 . you won't be able to build one for that little. >:|I would like to keep the blade no longer that 6.5 feet wide. I like the idea >:|of the small vehicle for being able to maneuvered easily in small areas. The >:|weight of the vehicle should be no problem. If it's too light, I could weld >:|in steel plates to the interior of the vehicle to offer it more traction. >:|And I could strip out the interior of seats and carpet to do this. I noticed >:|a lot of the guys plowing in 4x4 pickups had their boxes loaded with snow >:|for added traction. I did not see many 'plowers' using chains at all, most >:|likely as chains wear quickly on roads that have been cleared and are salted >:|and sanded. >:| >:|Also, any reconditions for tires and gear deferential(s) for this specific >:|application? BFG All-Terrain K/O or Bridgestone Dueler Revo's.. I prefer the BFG's. open differentials are all you need... if you need lockers, you're doing it wrong. >:| >:|Any help or ideas here would be appreciated. Thanks in advance. I would like >:|to get this set up for next year. >:| basically take it easy with your foot and let off before you hit the snowbank (unless you really need to pile it up). a lot of guys around here ( maine) who have just gotten a plow end up using a digital foot (i.e. WOT or idle) and just beat the ever loving crap out of their trucks. if I were you I'd go looking for a fixer upper plow truck. towards the spring you'll see mid 80's 4x4's w/ plows going for $500-$1500 which will serve you just fine. hth, Bret |
#3
|
|||
|
|||
I won't intentionally rain (ok, snow) on your parade, but...
1. That guy makes that money because of the fact he has an excellent plow rig. (I have a similar Dodge 2500 with a plow). He can do things that your smaller rig won't handle at all. You'd have to go out more often (smaller rig won't push as much snow as a big rig) but with going out more often you can't charge more... So your per/hour rate is much lower. 2. To plow commercially you *must* have a reliable rig. The first time the truck won't start, breaks, or whatever, your customers will disappear just like snow in June. 3. Plow trucks break. New trucks are better, of course. I've blown transmissions, broken frames, and done other damage plowing. It goes with the territory. Smaller trucks break more often, you have to push them harder to get the same results. 4. Plows are complex devices, engineered with many years of experience. 5. Plowing commercially with anything less than a 3/4 ton truck is risky. Sure you can plow with a Jeep Wrangler (I have friends who have used them for years to plow--but it is really rough on the vehicle.) 6. DOn't forget that if you plow, you also have to sand... Your customers won't want to deal with two services, if you don't sand then your competitor who does will get yoru jobs after the first ice storm. 7. Insurance! You *MUST* have insurance to cover the cases where you hit someone's house (seen it happen), someone's car (seen it happen), landscaping (seen it happen), whatever... Commercial plowing insurance is not cheap! 8. If your truck looks good, be prepaired to loose those good loooks! The odds are that you will slide into something every season. I've backed into more than one tree, I've wacked some stumps so hard that the plow blade bent. 9. Don't put things into the truck that can move under any circujstances. Those steel plates would have to be well welded to the frame. If not, they will end up in the front seat with you. 10. Plowing consists of hundreds of 5 MPH crashes each storm. Have a wet snow, and add incredible loads on the drive train. 11. Some will tell you to get a stick. I've had both. I've blown manual transmissions. I've never lost an automatic. Plowing is a busy task, both hands have lot's to do (left to work the plow, right to steer) and shifting adds more effort. You also have better control with an automatic. 12. Good tires. Chains. A good heater. Good wipers. A yellow flashing light (required, by law!) Read all your state's plowing laws--there are many. No pushing snow across a right of way. No dumping snow in a water body or river. Flashing lights etc. 13. Sure you could perhaps make $500 in a snow storm. Deduct fuel (god, does plowing drink fuel!) maintenance, and bad debts ("I'll pay you when I get my check, when my tax refund comes...", or other good story that you will only hear AFTER you plow their drive! I recommend cash only, at the time of plowing if you are not a 'legal business'. Don't forget taxes, both yours and the customers (some states may require you to collect sales tax). You won't get away with not paying taxes--your competitors will make sure of that! OK, now to dry up your parade: 1. Don't build your own plow. You can't do it, if you have those skills you would not be asking these questions. 2. There are plows made for small trucks. In the end, they are a good value. 3. You could buy a used plow, and get new mounts (or fabricate your own, I've done that too.) Used plows are cheaper, but may not be in the best condition. 4. Even a light truck (I've plowed with Isuzu Troopers, successfully!) can be made to work. Takes longer. More work. But it can be done. 5. Talk to a couple of commercial operators... they will tell you just what is involved. I could go on for several hours... But there's snow out there, and I've got to plow. Then take the truck to the dealer to get it fixed! On Sun, 16 Jan 2005 17:13:15 -0800, > wrote: >Snow plows for small 4x4's? > >I am going to either build a snow plow or purchase one. And put it on the >front of a Jeep or an older K5 Blazer that I have access to. I was over at >the store and there was a guy and his wife plowing snow in a Dodge 4x4 >diesel, long box and extended cab. I asked him how much he was making and he >said if he hustled, he could make about $200.00/hr. Damn good money, if that >is true??? I will have to ask around. > >12 hours of plowing at that rate would equal $2400.00. 24 hours would equal >$4800.00, before expenses. We have 18" of snow here right now and these guys >are working around the clock. Something to consider for next year. > >Any one know of any plans available on the web for building a small plow >unit for a small vehicle, such as a Jeep or a K5 Blazer or a Ford Bronco? > >I would like to keep the blade no longer that 6.5 feet wide. I like the idea >of the small vehicle for being able to maneuvered easily in small areas. The >weight of the vehicle should be no problem. If it's too light, I could weld >in steel plates to the interior of the vehicle to offer it more traction. >And I could strip out the interior of seats and carpet to do this. I noticed >a lot of the guys plowing in 4x4 pickups had their boxes loaded with snow >for added traction. I did not see many 'plowers' using chains at all, most >likely as chains wear quickly on roads that have been cleared and are salted >and sanded. > >Also, any reconditions for tires and gear deferential(s) for this specific >application? > >Any help or ideas here would be appreciated. Thanks in advance. I would like >to get this set up for next year. > |
#4
|
|||
|
|||
On Sun, 16 Jan 2005 21:37:08 -0500, Bret Chase >
wrote: >basically take it easy with your foot and let off before you hit the >snowbank (unless you really need to pile it up). a lot of guys around >here ( maine) who have just gotten a plow end up using a digital foot >(i.e. WOT or idle) and just beat the ever loving crap out of their >trucks. I've got one of those stupid things. GM's is best, Dodge (which is what I have) is a bear to drive. Don't know if Ford has drive by wire yet or not. Of course, having a 340 HP hemi makes things tricky anyway! <g> But, when not plowing--it is fun. |
#5
|
|||
|
|||
> wrote in message ... > Snow plows for small 4x4's? > > I am going to either build a snow plow or purchase one. And put it on the > front of a Jeep or an older K5 Blazer that I have access to. I was over at > the store and there was a guy and his wife plowing snow in a Dodge 4x4 > diesel, long box and extended cab. I asked him how much he was making and he > said if he hustled, he could make about $200.00/hr. Damn good money, if that > is true??? I will have to ask around. > > 12 hours of plowing at that rate would equal $2400.00. 24 hours would equal > $4800.00, before expenses. We have 18" of snow here right now and these guys > are working around the clock. Something to consider for next year. > > Any one know of any plans available on the web for building a small plow > unit for a small vehicle, such as a Jeep or a K5 Blazer or a Ford Bronco? > > I would like to keep the blade no longer that 6.5 feet wide. I like the idea > of the small vehicle for being able to maneuvered easily in small areas. The > weight of the vehicle should be no problem. If it's too light, I could weld > in steel plates to the interior of the vehicle to offer it more traction. > And I could strip out the interior of seats and carpet to do this. I noticed > a lot of the guys plowing in 4x4 pickups had their boxes loaded with snow > for added traction. I did not see many 'plowers' using chains at all, most > likely as chains wear quickly on roads that have been cleared and are salted > and sanded. > > Also, any reconditions for tires and gear deferential(s) for this specific > application? > > Any help or ideas here would be appreciated. Thanks in advance. I would like > to get this set up for next year. > > Best plow truck I ever owned was a Jeep CJ with a Fisher plow on it. Easy to maneuver, goes into places the big trucks only dream of. Uses less fuel, causes less damage. Had a steel half top made for it and put a nice hydraulic powered sander in the back. Chains are BIG trouble on pavement, they scar it up a LOT. Unless you want to pay to repair the damage don't use them. My current plow rig is a Jeep Wrangler. Set up with a Boss V plow and home built stainless steel sander rig (used parts from the old one that had a bad hopper) Works great and can handle a lot more snow than people think. Plowing isn't just drive fast-hit snow-watch snow fly. Do that and you WILL destroy the vehicle shortly. Plan out where your putting the snow, what obstacles are in that way (trees, wells, plant beds, sandboxes) Take into account what the person wants cleared as well, for instance JUST plowing the driveway is fine BUT I also have a small gas blower to blow off sidewalks and around buildings. Shovels work BUT that blower is much faster and does a better job. ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! >100,000 Newsgroups ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
#6
|
|||
|
|||
Steve, et al, thanks! I will reply a bit later. I am just taking off, again.
I had a flooding problem that I had to fix after the basement flooded in the snow melt. Now I am going skiing for a few days. Have fun, y'all!! "Steve W." > wrote in message ... > > > > > wrote in message > ... >> Snow plows for small 4x4's? >> >> I am going to either build a snow plow or purchase one. And put it on > the >> front of a Jeep or an older K5 Blazer that I have access to. I was > over at >> the store and there was a guy and his wife plowing snow in a Dodge 4x4 >> diesel, long box and extended cab. I asked him how much he was making > and he >> said if he hustled, he could make about $200.00/hr. Damn good money, > if that >> is true??? I will have to ask around. >> >> 12 hours of plowing at that rate would equal $2400.00. 24 hours would > equal >> $4800.00, before expenses. We have 18" of snow here right now and > these guys >> are working around the clock. Something to consider for next year. >> >> Any one know of any plans available on the web for building a small > plow >> unit for a small vehicle, such as a Jeep or a K5 Blazer or a Ford > Bronco? >> >> I would like to keep the blade no longer that 6.5 feet wide. I like > the idea >> of the small vehicle for being able to maneuvered easily in small > areas. The >> weight of the vehicle should be no problem. If it's too light, I could > weld >> in steel plates to the interior of the vehicle to offer it more > traction. >> And I could strip out the interior of seats and carpet to do this. I > noticed >> a lot of the guys plowing in 4x4 pickups had their boxes loaded with > snow >> for added traction. I did not see many 'plowers' using chains at all, > most >> likely as chains wear quickly on roads that have been cleared and are > salted >> and sanded. >> >> Also, any reconditions for tires and gear deferential(s) for this > specific >> application? >> >> Any help or ideas here would be appreciated. Thanks in advance. I > would like >> to get this set up for next year. >> >> > > Best plow truck I ever owned was a Jeep CJ with a Fisher plow on it. > Easy to maneuver, goes into places the big trucks only dream of. Uses > less fuel, causes less damage. Had a steel half top made for it and put > a nice hydraulic powered sander in the back. Chains are BIG trouble on > pavement, they scar it up a LOT. Unless you want to pay to repair the > damage don't use them. > My current plow rig is a Jeep Wrangler. Set up with a Boss V plow and > home built stainless steel sander rig (used parts from the old one that > had a bad hopper) Works great and can handle a lot more snow than people > think. Plowing isn't just drive fast-hit snow-watch snow fly. Do that > and you WILL destroy the vehicle shortly. Plan out where your putting > the snow, what obstacles are in that way (trees, wells, plant beds, > sandboxes) Take into account what the person wants cleared as well, for > instance JUST plowing the driveway is fine BUT I also have a small gas > blower to blow off sidewalks and around buildings. Shovels work BUT that > blower is much faster and does a better job. > > > > > ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet > News==---- > http://www.newsfeeds.com The #1 Newsgroup Service in the World! >100,000 > Newsgroups > ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
#7
|
|||
|
|||
Oh, did we mention that you can't go anywhere for the season, too? <g>
You have to be there to plow in case it snows--so you'll not be going on ski trips if you plow! BTW, *everybody* thinks they should be plowed first! On Tue, 18 Jan 2005 22:52:00 -0800, > wrote: >Steve, et al, thanks! I will reply a bit later. I am just taking off, again. >I had a flooding problem that I had to fix after the basement flooded in the >snow melt. Now I am going skiing for a few days. Have fun, y'all!! > > |
#8
|
|||
|
|||
Yeah that is one big OOPS. But there are times when you can sneak off
someplace since it doesn't snow all the time. Of course what usually happens is, you take off to some other state to visit the in-laws or something. While your gone the weather changes and it coats the area with more snow than has been seen in 20 years. The folks you have contracts with call, get the answering machine, hang up and call someone else while bitching about how they cannot find the miserable SOB they hired..... OR you do like I do and work out helper contracts with some of the other local plow folks. There are about four of us who have what could be called a "plow pool" IF it snows real bad and we have contracts that overlap we will help each other out and plow out the ones we are near. So far this has only happened twice (last year) Plus some of us have been known to plow out churches and elderly gratis (never know when one might send money or business your way...) Well time to fire up the plows here and go play in the snow. -- Steve Williams "Peter D. Hipson" > wrote in message ... > Oh, did we mention that you can't go anywhere for the season, too? <g> > You have to be there to plow in case it snows--so you'll not be going > on ski trips if you plow! > > BTW, *everybody* thinks they should be plowed first! > > On Tue, 18 Jan 2005 22:52:00 -0800, > wrote: > > >Steve, et al, thanks! I will reply a bit later. I am just taking off, again. > >I had a flooding problem that I had to fix after the basement flooded in the > >snow melt. Now I am going skiing for a few days. Have fun, y'all!! > > > > > |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Serious off-road traction tires | Jim | 4x4 | 20 | September 13th 04 04:20 PM |
What's the best stock 4x4 system for snow? | Christopher Grenness | 4x4 | 29 | July 5th 04 03:20 PM |
Dual Rear Wheel, 4X4 & Snow Chains | OrygunGuy | 4x4 | 0 | December 22nd 03 05:05 PM |