Passenger door finished!

Michael Cecil > wrote:
>It really does look nice with new rubber trim, new door panel and a new
>running board. The only problems I encountered were that the door rubber
>kit I ordered was lacking the inner scrapers for both doors but Ron at
>Wolfsburgwest rushed them out to me and it didn't rain in the meanwhile.
>Also, I had loosely reinstalled the window regulator but I didn't bolt it
>into place (thinking that I'd wait until I was ready to attach the window.
>So I busily reassembled the scrapers, felt and vent window and then when I
>tried to push the regulator up into place I realized that it had to be
>done before putting the vent window in place. Argh.
>
>Anyhow, it's all done now. Even little door clip seals and I did glue in
>a sheet of plastic (vapor barrier left over from redoing the hall bathroom
>sheetrock and tile). Whew!
>
>Now I just have to do the driver's side. I think I'll give my hands a bit
>of a break first.
>--
>Michael Cecil
>http://home.comcast.net/~macecil/
>http://home.comcast.net/~safehex/

I did the driver side 3 years ago...now I need to do the passenger side :-)


Joao
72 Super 1302

Michael Cecil > wrote:
>On 11 Nov 2005 03:22:51 -0800, "Joao Eliseu" >
>wrote:
>
>>I did the driver side 3 years ago...now I need to do the passenger side :-)
>
>I wanted to start with the side that was used less so if I screwed up I'd
>know how to do the important door better.
>--
>Michael Cecil
>http://home.comcast.net/~macecil/
>http://home.comcast.net/~safehex/

You are a wise men ;



Joao
72 Super 1302