If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ford's "Easy Fuel" capless fuel filler?
I just learned that the 2010 (and perhaps earlier) Ford Explorers, and other Ford models, have what Ford calls "Easy Fuel" capless fuel fillers. As near as I can tell, instead of unscrewing a cap, one inserts the gas pump nozzle into an opening which automatically moves aside for fueling, and immediately closes when the nozzle is withdrawn. So far, no problems. I also learned that one can buy a locking cover, to protect your gas tank from someone siphoning gas out. However, Ford says on one of its websites that it is almost impossible to siphon gas out, due to a second "one-way valve" on the tank where the filler attaches. That sounds OK to me too. Here is the potential problem I'm wondering if any of you have faced. The website also suggests that gas can be placed into your tank ONLY with a properly sized nozzle from a gas pump. Suppose you run out of gas, and need to add gas from a plastic 2- or 5-gallon gas can? Can one do it, or does that second "one-way valve" deep into the filler keep the gas from entering the tank? Has anyone here been successful in adding gas (other than at a gas station) to a Ford which is equipped with this relatively new device? Thanks. -- ---------- CWLee Former slayer of dragons; practice now limited to sacred cows. Believing we should hire for quality, not quotas, and promote for performance, not preferences. |
Ads |
#2
|
|||
|
|||
Ford's "Easy Fuel" capless fuel filler?
I have locking gas caps on both of my Dodge vans.
I don't think Ford's ''Easy Fuel'' capless thingy is such a ''Bright'' idea.Suppose some creeps want to put whatever kinds of crap into those capless fuel tanks? Pouring fuel from a small gasoline container into capless fuel tanks should work ok.If not, Ford has screwed up! cuhulin |
#3
|
|||
|
|||
Ford's "Easy Fuel" capless fuel filler?
CWLee wrote:
> > Here is the potential problem I'm wondering if any of you have faced. > The website also suggests that gas can be placed into your tank ONLY > with a properly sized nozzle from a gas pump. Gas pump nozzles have been like that for years, ever since unleaded gas came in. The pump nozzle for unleaded gas is smaller than one for leaded gas so you can't put leaded in by mistake. They also make gas cans nozzles 'unleaded' size and gravity gets by the internal 'valve' I have even seen those one way anti siphon 'valves' as a simple coil spring inside the tube. Mike 2000 Cherokee Sport 86/00 CJ7 Laredo, 33x9.5 BFG AT's, 'glass nose to tail in '00 'New' frame and everything else in '09. Some Canadian Bush Trip and Build Photos: http://mikeromainjeeptrips.shutterfly.com |
#4
|
|||
|
|||
Ford's "Easy Fuel" capless fuel filler?
On Nov 21, 2:46*pm, Mike Romain > wrote:
> CWLee wrote: > > > Here is the potential problem I'm wondering if any of you have faced. * > > The website also suggests that gas can be placed into your tank ONLY > > with a properly sized nozzle from a gas pump. * > > Gas pump nozzles have been like that for years, ever since unleaded gas > came in. *The pump nozzle for unleaded gas is smaller than one for > leaded gas so you can't put leaded in by mistake. > > They also make gas cans nozzles 'unleaded' size and gravity gets by the > internal 'valve' *I have even seen those one way anti siphon 'valves' as > a simple coil spring inside the tube. > > Mike > 2000 Cherokee Sport > 86/00 CJ7 Laredo, 33x9.5 BFG AT's, 'glass nose to tail in '00 > 'New' frame and everything else in '09. *Some Canadian Bush Trip and > Build Photos:http://mikeromainjeeptrips.shutterfly.com _________________________ I see this "capless filler" as a GOOD example of NASCAR making it's way too far into public life. And something else enters my mind when I think about Ford's new innovation - it starts with the letter "f" and ends in smoke... -CC |
#5
|
|||
|
|||
Ford's "Easy Fuel" capless fuel filler?
|
#6
|
|||
|
|||
Ford's "Easy Fuel" capless fuel filler?
Mike Romain wrote:
> CWLee wrote: >> > >> Here is the potential problem I'm wondering if any of you have faced. >> The website also suggests that gas can be placed into your tank ONLY >> with a properly sized nozzle from a gas pump. > > Gas pump nozzles have been like that for years, ever since unleaded gas > came in. The pump nozzle for unleaded gas is smaller than one for > leaded gas so you can't put leaded in by mistake. > > They also make gas cans nozzles 'unleaded' size and gravity gets by the > internal 'valve' I have even seen those one way anti siphon 'valves' as > a simple coil spring inside the tube. My 67 Barracuda had a quick-fill chrome cap that you opened by pressing on the release on the side and flipped it open. That was certainly " "boss." My mother 70 Barracuda had the filler located behind the spring loaded license plate holder. That was "not too cool." I'm glad that they're trying to make gimmicky gas fillers again. > > Mike > 2000 Cherokee Sport > 86/00 CJ7 Laredo, 33x9.5 BFG AT's, 'glass nose to tail in '00 > 'New' frame and everything else in '09. Some Canadian Bush Trip and > Build Photos: http://mikeromainjeeptrips.shutterfly.com |
#7
|
|||
|
|||
Ford's "Easy Fuel" capless fuel filler?
dsi1 > wrote:
> >My 67 Barracuda had a quick-fill chrome cap that you opened by pressing >on the release on the side and flipped it open. That was certainly " >"boss." My mother 70 Barracuda had the filler located behind the spring >loaded license plate holder. That was "not too cool." I'm glad that >they're trying to make gimmicky gas fillers again. Agreed. The current Ford system is definitely "far out." Since the current generation of gas cans has a nozzle specifically designed to fit like the filler nozzle on the pump, I don't see that it would be any issue. "Totally wicked" quick-fill systems should function in a "groovy way" with the modern cans. There are some old cans out there that don't have a long nozzle on them, just a short spout. Those would work with cars designed for leaded gas, but when unleaded came along the modern narrow nozzle standard came out specifically to prevent "hodads" from pouring leaded gas into a car designed only for unleaded. --scott > >> >> Mike >> 2000 Cherokee Sport >> 86/00 CJ7 Laredo, 33x9.5 BFG AT's, 'glass nose to tail in '00 >> 'New' frame and everything else in '09. Some Canadian Bush Trip and >> Build Photos: http://mikeromainjeeptrips.shutterfly.com -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#8
|
|||
|
|||
Ford's "Easy Fuel" capless fuel filler?
Scott Dorsey wrote:
> > Agreed. The current Ford system is definitely "far out." Since the > current generation of gas cans has a nozzle specifically designed to > fit like the filler nozzle on the pump, I don't see that it would be > any issue. "Totally wicked" quick-fill systems should function in a > "groovy way" with the modern cans. > > There are some old cans out there that don't have a long nozzle on > them, just a short spout. Those would work with cars designed for > leaded gas, but when unleaded came along the modern narrow nozzle > standard came out specifically to prevent "hodads" from pouring > leaded gas into a car designed only for unleaded. > --scott That's "bitchin!" The truth is that people are going to think they're really cool by not having to remove that gas cap and placing it on the trunk or holding it like the rest of us "gremmies." Do people still have those old gas cans? Do we still have to worry about pouring leaded gas into cars designed only for unleaded? What a "bummer." :-) > >>> Mike >>> 2000 Cherokee Sport >>> 86/00 CJ7 Laredo, 33x9.5 BFG AT's, 'glass nose to tail in '00 >>> 'New' frame and everything else in '09. Some Canadian Bush Trip and >>> Build Photos: http://mikeromainjeeptrips.shutterfly.com > > |
#9
|
|||
|
|||
Ford's "Easy Fuel" capless fuel filler?
As the OP I thank you guys for your comments and
speculation. Let me try to focus the responses a bit. First, I don't think the diameter of the gas pump nozzle or the gas can nozzle is the issue - the problem I'm concerned about is the length. The Ford website I consulted implied that the gas pump nozzle goes sufficiently far/deep into the filler tube to engage/open the inner valve - and that ordinary gas can nozzles or funnels are not long enough to allow gas to flow. Second, I'm mostly interested in hearing from people who have actually added gas from other than a gas pump into a recent model Ford that has one of these new devices. Speculation is interesting, but I'd really like to hear about some first-hand experience. Again, I do appreciate what has been posted so far, so please don't take offense at my desire to redirect the flow more pointedly. Thanks. |
#10
|
|||
|
|||
Ford's "Easy Fuel" capless fuel filler?
I have quite a few very old timey/old style gas cans.I do use one of
them for lawn more gas, because I like them better than the plastic gas cans.I am old fashioned. cuhulin |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
fuel filler enigma | RichD | Driving | 100 | May 13th 09 03:21 PM |
Carter is the only company that makes "in fuel tank" fuel pumps for the 1997 suburban | [email protected] | Technology | 7 | October 20th 07 12:46 AM |
"valve" or "button" in diesel fuel filler tube? | jtaylor | VW water cooled | 7 | August 13th 06 02:46 AM |
Chrome Fuel Filler Cap 90 Miata | bayman2222 | Mazda | 2 | June 17th 06 02:26 AM |
fuel leaking from fuel filler | Jeff Scherb | Jeep | 2 | March 29th 05 11:12 PM |