If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
GPL, Gameport / USB converter problems
Hi folks,
I just installed the Rockfire R-203 gameport to usb converter on my machine. Most sims work reasonably well, but GPL refuses to recognize the joystick axis (I have the rockfire set to 4 axes, 4 buttons). The control panel calibration tool looks ok, but once I click on a control function to assign in GPL's option screen, I don't get the red text indicating to move the axis that the control is going to be assigned to, it just goes sits there and does nothing. Any ideas on this one? All the best & thanks in advance, uwe -- Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/ Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E) GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61 |
Ads |
#2
|
|||
|
|||
"Uwe Schürkamp" > wrote in message
... > Hi folks, > > I just installed the Rockfire R-203 gameport to usb converter on my > machine. Most sims work reasonably well, but GPL refuses to recognize > the joystick axis (I have the rockfire set to 4 axes, 4 buttons). > > The control panel calibration tool looks ok, but once I click on a > control function to assign in GPL's option screen, I don't get the red > text indicating to move the axis that the control is going to be > assigned to, it just goes sits there and does nothing. > > Any ideas on this one? All the best & thanks in advance, Try installing gplshift (not the alshift util). I believe the standard gpl only recognises the first & last controller & may be restricted to 3 axis per controller. The gplshift util /may/ allow you to get around that. Malc. |
#3
|
|||
|
|||
Ive gotten GPL to work with a rockfire adapter before. Just asking a stupid
question: When you calibrate the controller inside of GPL which I assume you also are doing, does it calibrate properly there as well? My GPL calibration screen splits the controller into two different screens. One for one axis, and then you click an arrow in the bottom right corner and it lets you calibrate axis two. Do you see the same thing and does it calibrate correctly there? "Uwe Schürkamp" > wrote in message ... > Hi folks, > > I just installed the Rockfire R-203 gameport to usb converter on my > machine. Most sims work reasonably well, but GPL refuses to recognize > the joystick axis (I have the rockfire set to 4 axes, 4 buttons). > > The control panel calibration tool looks ok, but once I click on a > control function to assign in GPL's option screen, I don't get the red > text indicating to move the axis that the control is going to be > assigned to, it just goes sits there and does nothing. > > Any ideas on this one? All the best & thanks in advance, > > uwe > > > > -- > Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/ > Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E) > GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61 |
#4
|
|||
|
|||
Hi Malc,
thanks for your answer. I tracked down the problem to having to run gem2+ again, somehow it "updated" my ini files so that I could assign controllers again as usual. Somehow, this didn't work when I started gpl via the desktop icon; I had to do it through gem2+. All the best, uwe -- Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/ Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E) GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61 |
#5
|
|||
|
|||
"Uwe Schürkamp" > wrote in message
... > Hi Malc, > > thanks for your answer. I tracked down the problem to having to run > gem2+ again, somehow it "updated" my ini files so that I could assign > controllers again as usual. Somehow, this didn't work when I started > gpl via the desktop icon; I had to do it through gem2+. Odd, but at least you got it sorted ;-) Malc. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 7 | February 1st 05 01:43 PM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 10 | December 18th 04 05:15 AM |
gameport / usb converter | Uwe Schürkamp | Simulators | 5 | December 2nd 04 11:18 PM |
These problems normal for a 5-year-old Saturn? | Philip Nasadowski | Saturn | 7 | August 30th 04 03:55 AM |