Does the PCM control the Traction Control

When calibrating a new PCM, do you have to set anything regarding if the
car is equipped with traction control? Perhaps this is why mine does not
work after having a new computer installed.

Hello i had a problem with abs on 93 saturn , had a bad wire at right rear
, tried to patch old wire but the wire inside the insulation was
desentigrating turning to powder, CHEAP wire, Well anyway traction
controll is controlled by ABS controller that controls IGN, I would think
if abs works Traction control should work , Try reseting by removing
negative bat terminal !

I just tried disconnecting the battery and it did not help. I will check
with a local station and ask if the PCM has to be reprogrammed to activate
the TCS.

"justastreekin" > wrote in message
lkaboutautos.com...
> Hello i had a problem with abs on 93 saturn , had a bad wire at right rear
> , tried to patch old wire but the wire inside the insulation was
> desentigrating turning to powder, CHEAP wire, Well anyway traction
> controll is controlled by ABS controller that controls IGN, I would think
> if abs works Traction control should work , Try reseting by removing
> negative bat terminal !
>