If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
90 accord pgmfi/water leak
Just to pick some brains -2li, June 90 Accord, UK spec.
On the front of the pgmfi unit ( where PGMFI is written) - just about next to the throttle cable attachment and spring, is a small unit bolted on, with two small water hoses coming out of the base, and an electrical connector off top right. The base plate, where the hoses connect, is held by three screws. I have a small water leak from the base plate so need to take the unit off the pgmfi main body to replace gasket. Is this just mounted on the side of the pgmfi unit, for convenience - or is there some futher connection between the intake manifold and this unit. I don't want to disturb things, really, without knowing what exactly lurks inside, as the leak is very slight - but drippiing coolant is a bit corrosive. I can't get to the screws at the base without removing the two mounting bolts. I can't find any of the online manuals at honda.co.uk I had links to working any longer - it seems the 'Power of Dreams' has decided that we have to do just that in terms of online manuals. Are they still available anywhere ? Geoff - Bristol UK |
Ads |
#2
|
|||
|
|||
90 accord pgmfi/water leak
wrote: > Just to pick some brains -2li, June 90 Accord, UK spec. > > On the front of the pgmfi unit ( where PGMFI is written) - just about > next to the throttle cable attachment and spring, is a small unit > bolted on, with two small water hoses coming out of the base, and an > electrical connector off top right. > The base plate, where the hoses connect, is held by three screws. > I have a small water leak from the base plate so need to take the unit > off the pgmfi main body to replace gasket. > Is this just mounted on the side of the pgmfi unit, for convenience - > or is there some futher connection between the intake manifold and this > unit. > > I don't want to disturb things, really, without knowing what exactly > lurks inside, as the leak is very slight - but drippiing coolant is a > bit corrosive. I can't get to the screws at the base without removing > the two mounting bolts. > > I can't find any of the online manuals at honda.co.uk I had links to > working any longer - it seems the 'Power of Dreams' has decided that we > have to do just that in terms of online manuals. Are they still > available anywhere ? > Geoff - Bristol UK OK - since posting have found autozone drawing. Would appear to be eacv valve, an O ring connection behind.? Anybody know what's under the base plate of the valve - I'd presume just a water chamber where the two pipes enter ? I just need to remake the joint. |
#4
|
|||
|
|||
90 accord pgmfi/water leak
wrote in
oups.com: > OK - since posting have found autozone drawing. Would appear to be eacv > valve, an O ring connection behind.? Two O-rings. And they're more oval. Check the state of the screen in front of the inlet. If it's really filthy, brush off the worst of it with a toothbrush, then get some throttle-body cleaner and spray it 'til it's clean. > Anybody know what's under the base plate of the valve - I'd presume > just a water chamber where the two pipes enter ? I just need to remake > the joint. It's just a water chamber. The water goes in one hose and goes out the other. Strictly a heater for the EACV to make sure it doesn't ice up. The water and the air are kept separated. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
#5
|
|||
|
|||
90 accord pgmfi/water leak
|
#6
|
|||
|
|||
90 accord pgmfi/water leak
TeGGeR® wrote: > wrote in > oups.com: > > > Just to pick some brains -2li, June 90 Accord, UK spec. > > > > On the front of the pgmfi unit ( where PGMFI is written) > > > > That's the intake manifold. The PGM-FI "unit" is in the passenger > compartment. Honda just put that sticker on there for decoration > (I'm not kidding). > > > > > - just about > > next to the throttle cable attachment and spring, is a small unit > > bolted on, with two small water hoses coming out of the base, and an > > electrical connector off top right. > > > > That's the Electronic Air Control Valve. It controls idle speed. The > coolant hoses are actually for *heating*, so its narrow internal passages > won't ice up on you. > > > > > > The base plate, where the hoses connect, is held by three screws. > > I have a small water leak from the base plate so need to take the unit > > off the pgmfi main body to replace gasket. > > Is this just mounted on the side of the pgmfi unit, for convenience - > > or is there some futher connection between the intake manifold and this > > unit. > > > > There is an intake passage in the throttle body in front of the throttle > plate (the upper of the two holes in the throttle body), and an outlet on > the other side of the throttle plate, which you can't see. > > Those don't mean anything to you though, so don't worry about them. > > > > > > I don't want to disturb things, really, without knowing what exactly > > lurks inside, as the leak is very slight - but drippiing coolant is a > > bit corrosive. I can't get to the screws at the base without removing > > the two mounting bolts. > > > > The EACV unbolts with two bolts towards the rear. Between the EACV and the > throttle body are two oval O-rings, which are usually OK even with this > age. Don't lose them! And don't worry about the coolant drips. There won't > be much, provided the engine is cold. > > Once the EACV is off the intake manifold you can undo the coolant hoses to > remove it from the vehicle. If they won't come off (which is likely), have > new ones handy, then cut the old ones off. They will be hard and brittle > with age. You'll probably need new clamps as well. The old ones will be > fine if they haven't rusted through. > > Have some extra coolant handy. When you put the works back together, the > air will get purged out automatically, and the reservoir level may drop a > bit. > > > > > > > I can't find any of the online manuals at honda.co.uk I had links to > > working any longer - it seems the 'Power of Dreams' has decided that we > > have to do just that in terms of online manuals. Are they still > > available anywhere ? > > > The manuals have moved. Try he > http://www.honda.co.uk/car/owner/workshop.html > Your car's not there, but the '91 is going to be close enough. > > > -- > TeGGeR® > > The Unofficial Honda/Acura FAQ > www.tegger.com/hondafaq/ Many thanks - nice to know what these things do ! Will try the new link for the manuals. One thing I've noticed lately - is that the idle speed does not seem to be increasing when the air con is on - it should I think kick up to 900 from 800. I had a recent problem with the speed sensor not reading, giving me a 17 fault code - but since splitting the connector and reconnecting its been ok - but I havn't re set the ecu. Might that be the cause ? Geoff -Bristol UK |
#7
|
|||
|
|||
90 accord pgmfi/water leak
wrote in
ups.com: > > One thing I've noticed lately - is that the idle speed does not seem > to be increasing when the air con is on - it should I think kick up to > 900 from 800. No, should stay the same. The idle-up apparatus is desighed to keep the idle from dropping and staying dropped. > I had a recent problem with the speed sensor not reading, giving me a > 17 fault code - but since splitting the connector and reconnecting its > been ok - but I havn't re set the ecu. Might that be the cause ? No. A bad VSS usually gives funny transmission behavior and a wonky speedo. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OEM Honda parts catalogs for sale | Joe | Honda | 1 | June 25th 06 09:00 PM |
OEM Honda parts catalogs for sale | Joe | Honda | 0 | April 24th 06 10:36 PM |
OEM Honda parts catalogs for sale | Joe | Honda | 0 | April 2nd 06 08:58 PM |
OEM Honda parts catalogs for sale | Joe | Honda | 0 | March 26th 06 12:59 AM |
OEM Honda parts catalogs for sale | Joe | Honda | 0 | February 20th 06 11:44 PM |