If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Alternator question
Hi
I have a 1984 VW rabbit gti. The brushes are worn on my alternators voltage regulator. Can just the brushes be replaced? IF not I looked into getting a new regulator as they are only about $25. However I noticed that there are two sizes a 28 mm or 32 mm slip ring diameter. How do I know what I have? Can I tell my the number on the alternator? Thanks |
Ads |
#2
|
|||
|
|||
Alternator question
On Wed, 08 Nov 2006 15:28:11 GMT, "Tube Audio" >
wrote: >Hi > >I have a 1984 VW rabbit gti. > >The brushes are worn on my alternators voltage regulator. Can just the >brushes be replaced? > >IF not I looked into getting a new regulator as they are only about $25. >However I noticed that there are two sizes a 28 mm or 32 mm slip ring >diameter. How do I know what I have? Can I tell my the number on the >alternator? > >Thanks > If you are doing a walk-in buy, take the old one with you and make sure it matches! That is the *best* way to do it. I don't know the numbers, you could pull th eback off and measure it perhaps? AFAIK, the brushes are serviceable as a unit (about $12 online, maybe a bit more at a parts store). For example: http://www.prostreetonline.com/oem/w...tor+Brush+Assy. shows one seller. There are many other sellers of these online, so do a Google search. I'd disassemble and compare to photos online as well. |
#3
|
|||
|
|||
Alternator question
In article > ,
"Tube Audio" > wrote: > Hi > > I have a 1984 VW rabbit gti. > > The brushes are worn on my alternators voltage regulator. Can just the > brushes be replaced? > > IF not I looked into getting a new regulator as they are only about $25. > However I noticed that there are two sizes a 28 mm or 32 mm slip ring > diameter. How do I know what I have? Can I tell my the number on the > alternator? > As far as I know (I replaced the brush/regulator on my 82 convert years ago), the brushes and regulator are a single unit. I assume you could solder new brushes in, but to me the additional aggravation wouldn't be worth it considering that the whole unit is only $25. The regulator unit should have a Bosch part number on it that should solve the 28/32 mm thing. Bill 78 Rabbit...10/77 - 4/02 82 Convertibles(s)...since 93 95 Golf GL...since 11/99 02 Passat 1.8T Tip GLS...since 4/02 Take out the CAT to reply by email |
Thread Tools | |
Display Modes | |
|
|