If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
stalling engine at idle and speedometer not working related?
When I manual shift to neutral coming to an intersection or stop, my 93
wrangler 4.0 FI engine sometimes stalls out. It seems to have coincided with my speedometer not working. Would that be a cause? I disconnected the connector leading to the sensor/gear on the transfer case and I noticed a three wire connection, so it must be electronically sensed to the speedoemter. Before I purchase another sensor is there anything I can ohm out or check for voltages on the three wire connector? Diagram anyone has? I also thought about the sensor gear not meshing, so if I disconnect the sensor/gear from the transfer case with the cable connected, turn key to ignuand manually torn the gear by hand, should I see an output at the speedometer if the sensor is working? waz |
Ads |
Thread Tools | |
Display Modes | |
|
|