If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Gear wont change in auto Lebaron GTC 1995
Hi Guys,
I have a Chrysler Lebaron GTC 1995 model. It was working fine until i got it inspected. The guy was trying to fix the reverse lights in the rear and eventually when i went to pick up the car the following happened: 1. The speedometer not working 2. The gear not shifting. I can change it to all gears like D, 3, L R P etc etc. But whatever gear i put in, it does not shift from 1 to 2 or later. It stays in gear 1, no matter if i am D, L, 3. Everything else is ok. The mechanic said it was speed sensor relay and he replaced it. But that doesnt work. Now he is not sure himself. Any help will be appreciated. Also if someone can tell me how to find the detailed guide to repairing this car, that would be great. Many Thanks AG. |
Ads |
#2
|
|||
|
|||
Airay wrote:
> Hi Guys, > > I have a Chrysler Lebaron GTC 1995 model. It was working fine until i > got it inspected. The guy was trying to fix the reverse lights in the > rear and eventually when i went to pick up the car the following > happened: > > 1. The speedometer not working > > 2. The gear not shifting. I can change it to all gears like D, 3, L R > P etc etc. But whatever gear i put in, it does not shift from 1 to 2 > or later. It stays in gear 1, no matter if i am D, L, 3. Everything > else is ok. The mechanic said it was speed sensor relay and he > replaced it. But that doesnt work. Now he is not sure himself. Any > help will be appreciated. Also if someone can tell me how to find the > detailed guide to repairing this car, that would be great. Many Thanks > > AG. I'm not familiar with your particular car but it sounds like the mechanic tried to find the reverse light switch and found the vehicle speed sensor instead. I just hope he didn't apply 12V to it and fry the puter. nate -- replace "fly" with "com" to reply. http://home.comcast.net/~njnagel |
#3
|
|||
|
|||
Airay wrote:
> Hi Guys, > > I have a Chrysler Lebaron GTC 1995 model. It was working fine until i > got it inspected. The guy was trying to fix the reverse lights in the > rear and eventually when i went to pick up the car the following > happened: > > 1. The speedometer not working > > 2. The gear not shifting. I can change it to all gears like D, 3, L R > P etc etc. But whatever gear i put in, it does not shift from 1 to 2 > or later. It stays in gear 1, no matter if i am D, L, 3. Everything > else is ok. The mechanic said it was speed sensor relay and he > replaced it. But that doesnt work. Now he is not sure himself. Any > help will be appreciated. Also if someone can tell me how to find the > detailed guide to repairing this car, that would be great. Many Thanks > > AG. I'm not familiar with your particular car but it sounds like the mechanic tried to find the reverse light switch and found the vehicle speed sensor instead. I just hope he didn't apply 12V to it and fry the puter. nate -- replace "fly" with "com" to reply. http://home.comcast.net/~njnagel |
#4
|
|||
|
|||
Hi, I just posted my question about the problem with 1999 Town & Country http://groups-beta.google.com/group/...c3c09cdacdb578 and then started reading other posts and found you post with almost exactly the same problem! - Gears not shifting, speedometer not working and in addition "service engine soon" light is on. I recently had "clock spring" replacement which Chrysler recalled due to some fault. Couple of weeks after the repairs this problem came up all of a sudden. I thought something is wrong with transmission, but speedometer didn't make sense. Did you finally find the source of the problem? Was it a speed sensor? Thanks, IP. On Fri, 03 Dec 2004 16:19:43 -0800, Airay wrote: > Hi Guys, > > I have a Chrysler Lebaron GTC 1995 model. It was working fine until i got > it inspected. The guy was trying to fix the reverse lights in the rear and > eventually when i went to pick up the car the following happened: > > 1. The speedometer not working > > 2. The gear not shifting. I can change it to all gears like D, 3, L R P > etc etc. But whatever gear i put in, it does not shift from 1 to 2 or > later. It stays in gear 1, no matter if i am D, L, 3. Everything else is > ok. The mechanic said it was speed sensor relay and he replaced it. But > that doesnt work. Now he is not sure himself. Any help will be > appreciated. Also if someone can tell me how to find the detailed guide to > repairing this car, that would be great. Many Thanks > > AG. |
#5
|
|||
|
|||
Hi, I just posted my question about the problem with 1999 Town & Country http://groups-beta.google.com/group/...c3c09cdacdb578 and then started reading other posts and found you post with almost exactly the same problem! - Gears not shifting, speedometer not working and in addition "service engine soon" light is on. I recently had "clock spring" replacement which Chrysler recalled due to some fault. Couple of weeks after the repairs this problem came up all of a sudden. I thought something is wrong with transmission, but speedometer didn't make sense. Did you finally find the source of the problem? Was it a speed sensor? Thanks, IP. On Fri, 03 Dec 2004 16:19:43 -0800, Airay wrote: > Hi Guys, > > I have a Chrysler Lebaron GTC 1995 model. It was working fine until i got > it inspected. The guy was trying to fix the reverse lights in the rear and > eventually when i went to pick up the car the following happened: > > 1. The speedometer not working > > 2. The gear not shifting. I can change it to all gears like D, 3, L R P > etc etc. But whatever gear i put in, it does not shift from 1 to 2 or > later. It stays in gear 1, no matter if i am D, L, 3. Everything else is > ok. The mechanic said it was speed sensor relay and he replaced it. But > that doesnt work. Now he is not sure himself. Any help will be > appreciated. Also if someone can tell me how to find the detailed guide to > repairing this car, that would be great. Many Thanks > > AG. |
#6
|
|||
|
|||
Dear IP,
The problem was solved finally, it was the main computer of the care (engine computer) which went bad, the speed sensor relay was replaced first, but it did not work and then the computer was replaced. That made it working, albiet not the way it used to. I think it needs software reset or something like that. My sincere advice is dont take it to ANYONE other than who knows what he is doing. These are all electronic controlled cars. you transmission went into a LIMP so that you can drive it to someone and read teh diagnostic code. Most dealers will charge 50-70 for diagnostic on this, and i think its worth. if you find a place cheaper, but who has the ability thats ok as well. Its a electrical problem adn you needa diagnostic code reading place. Many thanks Airay IPavlov wrote: > Hi, > > I just posted my question about the problem with 1999 Town & Country > http://groups-beta.google.com/group/...c3c09cdacdb578 > and then started reading other posts and found you post with almost > exactly the same problem! - Gears not shifting, speedometer not working > and in addition "service engine soon" light is on. I recently had "clock > spring" replacement which Chrysler recalled due to some fault. Couple > of weeks after the repairs this problem came up all of a sudden. > I thought something is wrong with transmission, but speedometer didn't > make sense. > Did you finally find the source of the problem? Was it a speed sensor? > > Thanks, > IP. > > > On Fri, 03 Dec 2004 16:19:43 -0800, Airay wrote: > > > Hi Guys, > > > > I have a Chrysler Lebaron GTC 1995 model. It was working fine until i got > > it inspected. The guy was trying to fix the reverse lights in the rear and > > eventually when i went to pick up the car the following happened: > > > > 1. The speedometer not working > > > > 2. The gear not shifting. I can change it to all gears like D, 3, L R P > > etc etc. But whatever gear i put in, it does not shift from 1 to 2 or > > later. It stays in gear 1, no matter if i am D, L, 3. Everything else is > > ok. The mechanic said it was speed sensor relay and he replaced it. But > > that doesnt work. Now he is not sure himself. Any help will be > > appreciated. Also if someone can tell me how to find the detailed guide to > > repairing this car, that would be great. Many Thanks > > > > AG. |
#7
|
|||
|
|||
Dear IP,
The problem was solved finally, it was the main computer of the care (engine computer) which went bad, the speed sensor relay was replaced first, but it did not work and then the computer was replaced. That made it working, albiet not the way it used to. I think it needs software reset or something like that. My sincere advice is dont take it to ANYONE other than who knows what he is doing. These are all electronic controlled cars. you transmission went into a LIMP so that you can drive it to someone and read teh diagnostic code. Most dealers will charge 50-70 for diagnostic on this, and i think its worth. if you find a place cheaper, but who has the ability thats ok as well. Its a electrical problem adn you needa diagnostic code reading place. Many thanks Airay IPavlov wrote: > Hi, > > I just posted my question about the problem with 1999 Town & Country > http://groups-beta.google.com/group/...c3c09cdacdb578 > and then started reading other posts and found you post with almost > exactly the same problem! - Gears not shifting, speedometer not working > and in addition "service engine soon" light is on. I recently had "clock > spring" replacement which Chrysler recalled due to some fault. Couple > of weeks after the repairs this problem came up all of a sudden. > I thought something is wrong with transmission, but speedometer didn't > make sense. > Did you finally find the source of the problem? Was it a speed sensor? > > Thanks, > IP. > > > On Fri, 03 Dec 2004 16:19:43 -0800, Airay wrote: > > > Hi Guys, > > > > I have a Chrysler Lebaron GTC 1995 model. It was working fine until i got > > it inspected. The guy was trying to fix the reverse lights in the rear and > > eventually when i went to pick up the car the following happened: > > > > 1. The speedometer not working > > > > 2. The gear not shifting. I can change it to all gears like D, 3, L R P > > etc etc. But whatever gear i put in, it does not shift from 1 to 2 or > > later. It stays in gear 1, no matter if i am D, L, 3. Everything else is > > ok. The mechanic said it was speed sensor relay and he replaced it. But > > that doesnt work. Now he is not sure himself. Any help will be > > appreciated. Also if someone can tell me how to find the detailed guide to > > repairing this car, that would be great. Many Thanks > > > > AG. |
#8
|
|||
|
|||
Thanks a lot for the information. I didn't take a van for repairs yet. - Was thinking about replacing the sensor myself first. Now I'm thinking that limp mode may be result of a computer going bad not the sensor, like it was in your case, May be the sensor failure is just the more frequent one. What was the final cost of repairs for your car? Computer probably more costly than just the sensor. Thanks, IP. On Tue, 21 Dec 2004 08:50:48 -0800, Airay wrote: > Dear IP, > > The problem was solved finally, it was the main computer of the care > (engine computer) which went bad, the speed sensor relay was replaced > first, but it did not work and then the computer was replaced. That made > it working, albiet not the way it used to. I think it needs software reset > or something like that. My sincere advice is dont take it to ANYONE other > than who knows what he is doing. These are all electronic controlled cars. > you transmission went into a LIMP so that you can drive it to someone and > read teh diagnostic code. Most dealers will charge 50-70 for diagnostic on > this, and i think its worth. if you find a place cheaper, but who has the > ability thats ok as well. > > Its a electrical problem adn you needa diagnostic code reading place. > > Many thanks > > Airay > > IPavlov wrote: >> Hi, >> >> I just posted my question about the problem with 1999 Town & Country >> > http://groups-beta.google.com/group/...c3c09cdacdb578 >> and then started reading other posts and found you post with almost >> exactly the same problem! - Gears not shifting, speedometer not > working >> and in addition "service engine soon" light is on. I recently had > "clock >> spring" replacement which Chrysler recalled due to some fault. Couple of >> weeks after the repairs this problem came up all of a sudden. I thought >> something is wrong with transmission, but speedometer > didn't >> make sense. >> Did you finally find the source of the problem? Was it a speed > sensor? >> >> Thanks, >> IP. >> >> >> On Fri, 03 Dec 2004 16:19:43 -0800, Airay wrote: >> >> > Hi Guys, >> > >> > I have a Chrysler Lebaron GTC 1995 model. It was working fine until > i got >> > it inspected. The guy was trying to fix the reverse lights in the > rear and >> > eventually when i went to pick up the car the following happened: >> > >> > 1. The speedometer not working >> > >> > 2. The gear not shifting. I can change it to all gears like D, 3, L > R P >> > etc etc. But whatever gear i put in, it does not shift from 1 to 2 > or >> > later. It stays in gear 1, no matter if i am D, L, 3. Everything > else is >> > ok. The mechanic said it was speed sensor relay and he replaced it. > But >> > that doesnt work. Now he is not sure himself. Any help will be >> > appreciated. Also if someone can tell me how to find the detailed > guide to >> > repairing this car, that would be great. Many Thanks >> > >> > AG. |
#9
|
|||
|
|||
Thanks a lot for the information. I didn't take a van for repairs yet. - Was thinking about replacing the sensor myself first. Now I'm thinking that limp mode may be result of a computer going bad not the sensor, like it was in your case, May be the sensor failure is just the more frequent one. What was the final cost of repairs for your car? Computer probably more costly than just the sensor. Thanks, IP. On Tue, 21 Dec 2004 08:50:48 -0800, Airay wrote: > Dear IP, > > The problem was solved finally, it was the main computer of the care > (engine computer) which went bad, the speed sensor relay was replaced > first, but it did not work and then the computer was replaced. That made > it working, albiet not the way it used to. I think it needs software reset > or something like that. My sincere advice is dont take it to ANYONE other > than who knows what he is doing. These are all electronic controlled cars. > you transmission went into a LIMP so that you can drive it to someone and > read teh diagnostic code. Most dealers will charge 50-70 for diagnostic on > this, and i think its worth. if you find a place cheaper, but who has the > ability thats ok as well. > > Its a electrical problem adn you needa diagnostic code reading place. > > Many thanks > > Airay > > IPavlov wrote: >> Hi, >> >> I just posted my question about the problem with 1999 Town & Country >> > http://groups-beta.google.com/group/...c3c09cdacdb578 >> and then started reading other posts and found you post with almost >> exactly the same problem! - Gears not shifting, speedometer not > working >> and in addition "service engine soon" light is on. I recently had > "clock >> spring" replacement which Chrysler recalled due to some fault. Couple of >> weeks after the repairs this problem came up all of a sudden. I thought >> something is wrong with transmission, but speedometer > didn't >> make sense. >> Did you finally find the source of the problem? Was it a speed > sensor? >> >> Thanks, >> IP. >> >> >> On Fri, 03 Dec 2004 16:19:43 -0800, Airay wrote: >> >> > Hi Guys, >> > >> > I have a Chrysler Lebaron GTC 1995 model. It was working fine until > i got >> > it inspected. The guy was trying to fix the reverse lights in the > rear and >> > eventually when i went to pick up the car the following happened: >> > >> > 1. The speedometer not working >> > >> > 2. The gear not shifting. I can change it to all gears like D, 3, L > R P >> > etc etc. But whatever gear i put in, it does not shift from 1 to 2 > or >> > later. It stays in gear 1, no matter if i am D, L, 3. Everything > else is >> > ok. The mechanic said it was speed sensor relay and he replaced it. > But >> > that doesnt work. Now he is not sure himself. Any help will be >> > appreciated. Also if someone can tell me how to find the detailed > guide to >> > repairing this car, that would be great. Many Thanks >> > >> > AG. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gear wont change in auto Lebaron GTC 1995 | Airay | Dodge | 0 | December 4th 04 12:19 AM |
Gear change and Air Con | Ballymoney | Alfa Romeo | 3 | October 3rd 04 08:40 AM |
How to change light bulb on auto gearbox? | [email protected] | Audi | 0 | September 29th 04 09:22 AM |
156 Selespeed dimming lights in gear change | Azzy | Alfa Romeo | 3 | September 11th 04 11:51 AM |