A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Chrysler
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

94 intrepid



 
 
Thread Tools Display Modes
  #1  
Old February 24th 06, 01:06 PM posted to rec.autos.makers.chrysler
external usenet poster
 
Posts: n/a
Default 94 intrepid

same old same old.tranny stuck in 2nd gear.replaced both input and out
put sensors changed tranny fluid and filter,same problem.was told it
could be the tran control module .i believe it is located on the
drivers side fender wall,under the hood and next to the battery.it is
about 4in by 2-3in plug.that plugs into another silver box that is
about 6-8in sq.it is held in to this box by a 5/16 bolt.am i in the
right place?.do i have the right part(tran control module)?.is it the
plug or the box that the plug plugs into?if it is the plug(complete
with a gang of about 10 wires),where do all the wires go ?thanks in
advance for any

Ads
  #2  
Old February 25th 06, 04:13 AM posted to rec.autos.makers.chrysler
external usenet poster
 
Posts: n/a
Default 94 intrepid

> wrote in message
oups.com...
> same old same old.tranny stuck in 2nd gear.replaced both input and out
> put sensors changed tranny fluid and filter,same problem.was told it
> could be the tran control module .i believe it is located on the
> drivers side fender wall,under the hood and next to the battery.it is
> about 4in by 2-3in plug.that plugs into another silver box that is
> about 6-8in sq.it is held in to this box by a 5/16 bolt.am i in the
> right place?.do i have the right part(tran control module)?.is it the
> plug or the box that the plug plugs into?if it is the plug(complete
> with a gang of about 10 wires),where do all the wires go ?thanks in
> advance for any
>


Have you considered diagnosis? The reason that it's in 2nd gear is that the
computer has made a decision. Wouldn't you like to know what the decision
was?


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help: 97 Dodge Intrepid PCM scan problem --> GLEN maxpower Dodge 3 October 18th 05 07:15 AM
Rebuilt Intrepid 2.7L Mark R Dodge 2 August 28th 05 03:33 PM
HELP: 97 Intrepid stub axel slop Bill Dodge 0 May 12th 05 04:54 PM
Intrepid AC Bill Dodge 6 July 3rd 04 02:14 AM


All times are GMT +1. The time now is 11:05 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.