A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Chrysler
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

2000 Chrysler Grand Voyager 3.3L Engine Timing Chain



 
 
Thread Tools Display Modes
  #11  
Old February 28th 17, 04:16 PM posted to rec.autos.makers.chrysler
[email protected]
external usenet poster
 
Posts: 1
Default 2000 Chrysler Grand Voyager 3.3L Engine Timing Chain

On Thursday, October 1, 2009 at 11:29:29 PM UTC-5, William R. Walsh wrote:
> Hello all...
>
> Recently, my mother's 2000 Chrysler Grand Voyager van (195,575 or so miles
> on the clock) seems to have jumped out of time. It was going down the
> highway at the time, probably about 45-50 miles per hour and it just quit..
> Subsequent examination shows that the engine is very clearly out of time but
> it will try to run, albeit very poorly. This experiment was only attempted
> once, and the engine only ran for about three seconds before stalling. The
> rhythm of the starter motor is also very clearly off.
>
> I read through some old posts here and it seems like the lifespan of the
> chain should be about 200,000 miles. Okay, fine. I won't argue with it over
> 5,000 or so piddly miles. Stuff happens.
>
> What nobody ever seems to say one way or another is whether or not the 3.3L
> V6 engine is an interference engine design or not. People have asked and the
> answer that comes out is "why does it matter, the chain is good up to
> 200,000 miles". Well, that's fine, but if it slips or fails at that magical
> point, one needs to know if the engine can simply be retimed, the chain
> replaced and everything goes on as it did before...or if repairs to bent
> valves and such may be required. That's why it matters!
>
> The van ran fine before this unfortunate incident.
>
> I'd also like to know how much of a job it is to change the timing chain. Is
> there anything in particular to watch out for? Things that should be done
> "while we were in there anyway"? Many thanks to anyone who can shed some
> light on this.
>
> William


do the usual change water pump,chain tensioners,flush coolant.make sure to get the tool that keeps the timing gears from moving.You probably jumped one tooth which wont matter as far as bent valves are concerned.You would have KNOWN by the sound if the valves hit the pistons.Use a socket and wrench to move the #! piston to tdc, before removing chain.
Ads
  #12  
Old March 1st 17, 04:30 AM posted to rec.autos.makers.chrysler
MoPar Man
external usenet poster
 
Posts: 660
Default 2000 Chrysler Grand Voyager 3.3L Engine Timing Chain

On Thursday, October 1, 2009 William R. Walsh wrote:

> Hello all...
>
> Recently, my mother's 2000 Chrysler Grand Voyager van (...)


On Feb. 28, 2017, delandmeadows @ gmail.com replied:

> do the usual change water pump,chain tensioners,flush (...)


Hey Deland.

It's been over 7 years, but I'm sure William Walsh has been waiting for
your reply to his 2009 post.

=========

Yes Deland, you've just qualified yourself for the 2017 Usenet Clueless
Google-Grouper poster of the year award!
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
2000 Passat V6 Timing Chain Tensioners Tube Audio[_2_] VW water cooled 2 April 27th 09 11:39 PM
2000 Chrysler Grand Voyager Water Pump William R. Walsh Chrysler 5 October 25th 07 12:46 AM
timing chain 4.0L engine [email protected] Jeep 1 February 27th 05 04:51 PM
89 Grand Am Quad 4 Timing chain... Pierre General 0 January 30th 05 12:01 AM
2000 Chrysler Grand Voyager Minivan William R. Walsh Chrysler 10 December 12th 04 06:14 AM


All times are GMT +1. The time now is 12:40 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.