A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto newsgroups » 4x4
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

stalling engine at idle and speedometer not working related?



 
 
Thread Tools Display Modes
  #1  
Old March 27th 05, 05:45 PM
external usenet poster
 
Posts: n/a
Default stalling engine at idle and speedometer not working related?

When I manual shift to neutral coming to an intersection or stop, my 93
wrangler 4.0 FI engine sometimes stalls out. It seems to have coincided
with my speedometer not working. Would that be a cause?

I disconnected the connector leading to the sensor/gear on the transfer
case and I noticed a three wire connection, so it must be
electronically sensed to the speedoemter. Before I purchase another
sensor is there anything I can ohm out or check for voltages on the
three wire connector? Diagram anyone has?

I also thought about the sensor gear not meshing, so if I disconnect
the sensor/gear from the transfer case with the cable connected, turn
key to ignuand manually torn the gear by hand, should I see an output
at the speedometer if the sensor is working?


waz

Ads
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 05:57 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.