A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto newsgroups » Technology
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Hydraulic Floor Jack, Release Valve won't tighten



 
 
Thread Tools Display Modes
  #1  
Old January 9th 08, 10:41 PM posted to rec.autos.tech
Gifters
external usenet poster
 
Posts: 1
Default Hydraulic Floor Jack, Release Valve won't tighten

OK, I'm trying to fix my Floor jack, the problem is when I tighten the
handle it doesn't come to a stopping point, the handle keeps turning
and the release valve is left open, I've first couple of parts and now
there is a square hole and I assume a ball barring, I have no idea
what do do from here.
Any advice or help would be great, thanks.
Ads
  #2  
Old March 17th 15, 08:18 PM posted to rec.autos.tech
cam
external usenet poster
 
Posts: 1
Default Hydraulic Floor Jack, Release Valve won't tighten

replying to Gifters , cam wrote:
> Gifters wrote:
>
> OK, I'm trying to fix my Floor jack, the problem is when I tighten the
> handle it doesn't come to a stopping point, the handle keeps turning
> and the release valve is left open, I've first couple of parts and now
> there is a square hole and I assume a ball barring, I have no idea
> what do do from here.
> Any advice or help would be great, thanks.



have you found any answer as my jack is doing the same thing
jack release valve doesn't tighten just keeps spinning and i have to stop and
see if it will pump at a certain point when i find where it will start pumping
it is fine but will have to do the same thing when letting it down and
sometimes will come down really quick
any help will be appreciated

--
posted from
http://www.motorsforum.com/tech/hydr...ten-65853-.htm
using MotorsForum's Web, RSS and Social Media Interface to
rec.autos.tech and other automotive groups

  #3  
Old February 20th 17, 10:29 PM posted to rec.autos.tech
[email protected]
external usenet poster
 
Posts: 1
Default Hydraulic Floor Jack, Release Valve won't tighten

On Wednesday, January 9, 2008 at 3:41:41 PM UTC-6, Gifters wrote:
> OK, I'm trying to fix my Floor jack, the problem is when I tighten the
> handle it doesn't come to a stopping point, the handle keeps turning
> and the release valve is left open, I've first couple of parts and now
> there is a square hole and I assume a ball barring, I have no idea
> what do do from here.
> Any advice or help would be great, thanks.


I am having the same problem did anyone find solutions to this?
  #4  
Old April 28th 18, 06:43 PM posted to rec.autos.tech
[email protected]
external usenet poster
 
Posts: 1
Default Hydraulic Floor Jack, Release Valve won't tighten

I'm having the same problem
  #5  
Old March 30th 19, 02:45 AM posted to rec.autos.tech
[email protected]
external usenet poster
 
Posts: 1
Default Hydraulic Floor Jack, Release Valve won't tighten

On Saturday, April 28, 2018 at 1:43:06 PM UTC-4, wrote:
> I'm having the same problem


Me too
  #6  
Old March 30th 19, 02:26 PM posted to rec.autos.tech
[email protected]
external usenet poster
 
Posts: 1
Default Hydraulic Floor Jack, Release Valve won't tighten

On Wednesday, January 9, 2008 at 4:41:41 PM UTC-5, Gifters wrote:
> OK, I'm trying to fix my Floor jack, the problem is when I tighten the
> handle it doesn't come to a stopping point, the handle keeps turning
> and the release valve is left open, I've first couple of parts and now
> there is a square hole and I assume a ball barring, I have no idea
> what do do from here.
> Any advice or help would be great, thanks.


i have the same exact thing,did you find out what to do?
  #8  
Old September 3rd 19, 04:45 PM posted to rec.autos.tech
Gebbi
external usenet poster
 
Posts: 3
Default Hydraulic Floor Jack, Release Valve won't tighten


> GUEST wrote:
> OK, I'm trying to fix my Floor jack, the problem is when I tighten

the
> handle it doesn't come to a stopping point, the handle keeps

turning
> and the release valve is left open, I've first couple of parts and

now
> there is a square hole and I assume a ball barring, I have no idea
> what do do from here.
> Any advice or help would be great, thanks.


I have no idea
what do do from here.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hydraulic floor jack recommendations AnotherSquid Honda 1 April 20th 07 06:40 PM
Hydraulic Valve lifters... devilliers VW air cooled 2 April 12th 07 05:50 AM
Valve,Butterfly valve,Globe valve,Check valve,Ball valve,Plug valve,Marine valve,Gate valve,Flow control valve [email protected] Alfa Romeo 0 April 17th 06 08:20 AM
AWA [OFFER] Hydraulic floor jack [email protected] General 0 January 13th 06 07:02 AM
Where's the hydraulic clutch bleed valve for a 1994 SL2 [email protected] Saturn 5 December 18th 04 02:26 AM


All times are GMT +1. The time now is 10:21 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.