1992 E36 325i blower motor

Hi,

Can anybody advise me how to change the blower motor? I have removed the
wiper arms, the air plenum and the spark plug cover. It looks like that the
wiper motor is attached to a linkage assembly, but I couldn't find the wiper
motor support bracket. I can see the blower motor in the center but there
seems too little space to get it out. Am I on the right track and what else
should I remove? Could you give me instructions on how to replace the
blower motor?

Thanks,

K

Try these steps:

1. Disconnect the battery negative terminal. Remove the engine compartment
heater inlet.

2. Unclip the blower motor end covers and remove them from the housing. If
necessary, remove the pollen filters.

3. Release the clips and lift off the blower motor covers. Disconnect the
motor wiring then release the motor retaining clip and manoeuvre the motor
out of position.

4. Refitting is the reversal of removal procedure making sure the motor is
correctly clipped into the housing and the housing covers are securely
refitted.