If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Chevy lumina 1993 frint seat removal
I have a 1993 lumina four door which has a broken front drivers door outside handle. After a few days the inside handle stopped working as well.
I was told to remove the door liner to get at the latch and that I would have to remove the drivers seat to get enough clearance to do so. The drivers seat is not powered but does not have much adjustment front to rear. I have the front bolts out but I don't see any bolts at the rear of the track. Can anyone tell me where the rear bolts are located ? Alternatively , how do I get the door open with neither handle working ? A local repair shop quoted me over $200 to fix it and at the moment that is not an option. Thanks for any suggestions. |
Ads |
#2
|
|||
|
|||
Chevy lumina 1993 frint seat removal
I can not get the door open and there does not seem to be enough clearance to remove the inner panel with the door closed.
|
#3
|
|||
|
|||
Chevy lumina 1993 frint seat removal
On 2/13/2013 2:17 PM, wrote:
> I can not get the door open and there does not seem to be enough clearance to remove the inner panel with the door closed. > https://www.youtube.com/watch?v=OHFI1Q77VgU -- Andrew Muzi <www.yellowjersey.org/> Open every day since 1 April, 1971 |
#4
|
|||
|
|||
Chevy lumina 1993 frint seat removal
On Feb 13, 4:10*pm, AMuzi > wrote:
> On 2/13/2013 2:17 PM, wrote: > > > I can not get the door open and there does not seem to be enough clearance to remove the inner panel with the door closed. > > https://www.youtube.com/watch?v=OHFI1Q77VgU > > -- > Andrew Muzi > * <www.yellowjersey.org/> > * Open every day since 1 April, 1971 lol And you also need to read the post again!!! Damn. |
#5
|
|||
|
|||
Chevy lumina 1993 frint seat removal
the will > wrote in
: > On Feb 13, 4:10*pm, AMuzi > wrote: >> On 2/13/2013 2:17 PM, wrote: >> >> > I can not get the door open and there does not seem to be enough >> > cleara > nce to remove the inner panel with the door closed. >> >> https://www.youtube.com/watch?v=OHFI1Q77VgU >> >> -- >> Andrew Muzi >> * <www.yellowjersey.org/> >> * Open every day since 1 April, 1971 > > lol And you also need to read the post again!!! Damn. The video shows a locksmith-type guy opening the door from the windowsill trim area using what appears to be a coat-hanger. I take it that this is a suggestion from Andrew. If so, it's a good one. The pro's use a small wedge to lever the trim away from the door so they can more easily see inside the door while maneuvering the Slim Jim. Once the door is open, it is no longer necessary to remove the seat. -- Tegger |
#6
|
|||
|
|||
Chevy lumina 1993 frint seat removal
On Feb 13, 1:01*pm, wrote:
There are two screws/nuts in the back of the seat also. There might be plastic covers over them or carpet over them. They are going to be at the back of the track. One on each side. Once you get the panel off, you will be able to pull on the release rod that comes from the inner handle. If the release rod came loose from the latch assembly, you'll have to get a flashlight and find the little arm the rod hooks to on the latch assembly and pull it with pliers. When you have the inner panel off you could take the outer handle off. (unbolts from the inside of the door) Once you have it off, you'll see the release rod for that one. Pull it and the door should open. |
#7
|
|||
|
|||
Chevy lumina 1993 frint seat removal
On Feb 13, 4:29*pm, Tegger > wrote:
> The video shows a locksmith-type guy opening the door from the windowsill > trim area using what appears to be a coat-hanger. I take it that this is a > suggestion from Andrew. If so, it's a good one. > > The pro's use a small wedge to lever the trim away from the door so they > can more easily see inside the door while maneuvering the Slim Jim. > > Once the door is open, it is no longer necessary to remove the seat. > > -- > Tegger lol I take it that the OP's door isn't locked! Hello! |
#8
|
|||
|
|||
Chevy lumina 1993 frint seat removal
On Wednesday, February 13, 2013 3:34:30 PM UTC-6, the will wrote:
> On Feb 13, 4:29*pm, Tegger > wrote: > > > > > The video shows a locksmith-type guy opening the door from the windowsill > > > trim area using what appears to be a coat-hanger. I take it that this is a > > > suggestion from Andrew. If so, it's a good one. > > > > > > The pro's use a small wedge to lever the trim away from the door so they > > > can more easily see inside the door while maneuvering the Slim Jim. > > > > > > Once the door is open, it is no longer necessary to remove the seat. > > > > > > -- > > > Tegger > > > > lol I take it that the OP's door isn't locked! Hello! ok, thanks for the replies , I will have another look and see if there is any track under the carpet. The door is not locked, so I did not know if a wire could be used to open the latch. |
#9
|
|||
|
|||
Chevy lumina 1993 frint seat removal
On Feb 13, 6:05*pm, wrote:
> > ok, thanks for the replies , I will have another look and see if there is any track under the carpet. > > The door is not locked, so I did not know if a wire could be used to open the latch. If you can't find any bolts/nuts on the inside, look for them from underneath the car. I think they're on the inside, but not sure. |
#10
|
|||
|
|||
Chevy lumina 1993 frint seat removal
wrote in
: >> lol I take it that the OP's door isn't locked! Hello! > > ok, thanks for the replies , I will have another look and see if there > is any track under the carpet. Go to www.autozone.com Find the Repair Help > Vehicle Repair Guides menus. Register with AZ. After that, you can access the free auto-repair guides. I found that they have seat-removal instructions for your car, including diagrams. The text of the instructions reads as follows: 1) Operate the seat to the full-forward position (full-forward and full-up if six way power seat). 2) Remove the track covers and front anchor bolts. 3) Operate the seat to the full-rearward position. 4) Remove the rear anchor bolts. 5) Unplug the electrical connectors (six way power seats). 6) With an assistant, lift the seat out of the vehicle making sure the spacer washers remain in place. > > The door is not locked, so I did not know if a wire could be used to > open the latch. > It doesn't matter if the door is locked or not. Either way it can be opened from the top, between the glass and the trim. AAA does it every minute of every day of every year. -- Tegger |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
advice - 1993 chevy lumina sedan , headlight dimmer switch not working | [email protected] | Technology | 7 | September 20th 12 02:41 PM |
1993 lumina sedan trunk lock jammed open . | [email protected] | Technology | 1 | February 28th 11 03:39 PM |
help with 1993 chevy lumina sedan, trailer wiring , whats needed | [email protected] | Technology | 2 | August 26th 10 01:17 AM |
Autos 1978 - 2003 ] [213de485] - 1993 Chevrolet Lumina Z-34 Dale Earnhardt Race Car Black Frt Qtr.jpg (3/3) | yvonttycomprendre | Auto Photos | 0 | September 15th 07 11:26 PM |
92 3.1 chevy lumina | [email protected] | Technology | 4 | July 11th 06 12:00 PM |