A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Ford Mustang
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

PCV valve



 
 
Thread Tools Display Modes
  #1  
Old July 10th 08, 08:38 PM posted to rec.autos.makers.ford.mustang
goodnigh
external usenet poster
 
Posts: 210
Default PCV valve

Have purchased a "proper" oil filler cap for my '71 M-code.
The one on now is a flat design with a PCV valve stuck in
the hole in the center of the cap. The new one is a tall design
with a right angle connector mounted on top. Both are twist
on, of course. The problem being, there does not seem to
be any provision for a PCV valve on the new cap. Do I
need one? The new cap is supposed to properly fit
a 1971 351C 4V.

mike


Ads
  #2  
Old July 11th 08, 12:03 AM posted to rec.autos.makers.ford.mustang
Kruse
external usenet poster
 
Posts: 237
Default PCV valve

On Jul 10, 3:38 pm, "goodnigh" > wrote:
> Do I
> need one?



You are asking if you need a PCV valve, correct? If you want to keep
sludge out of your engine
and keep air pollution down to a minimum, yes, you need a PCV valve.
Does the new one have a
removeable center?

BTW, I have a '71 351C 2V Cougar with a stock oil cap and it has a PCV
valve.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Does tapered cam profile change valve timing with valve lift ??? Raj Technology 2 December 12th 06 01:23 AM
2001 VR6 - Combi-valve / cross over valve / P codes Scott C VW water cooled 0 May 26th 06 12:39 AM
Valve,Butterfly valve,Globe valve,Check valve,Ball valve,Plug valve,Marine valve,Gate valve,Flow control valve [email protected] Alfa Romeo 0 April 17th 06 08:20 AM
ball valve,check valve,globe valve, [email protected] Alfa Romeo 0 March 1st 06 04:11 AM
AWA [OFFER] Turbo blow off valve/Bypass valve with Great Price and top quality [email protected] General 0 February 2nd 06 11:51 AM


All times are GMT +1. The time now is 03:30 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.