If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
broken shifter lever bushing workaround
Brilliant,
How long did it take you to find that part? It worked perfectly. You saved me an alot of time and money. Thank You. To save time on widdling I used a vise grip and a pair of pliers to smooth down the outer ring. I simply turned it back and forth until it was the proper size to fit in the linkage ring. On the inner ring I used a Dremel to bore it out so the ball would fit. Since I had no one around to help me press it on I cut to small blocks and place them on both sides and pressed. It went on and now shifts perfectly. Thank You for taking the time to share your success with us. |
Ads |
Thread Tools | |
Display Modes | |
|
|