A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Mazda
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Rotary Engine FAQ 0409



 
 
Thread Tools Display Modes
  #1  
Old September 1st 04, 02:31 PM
Felix Miata
external usenet poster
 
Posts: n/a
Default Rotary Engine FAQ 0409

Questions answered in the Rotary (Engine) FAQ:

1.How does a rotary engine work?
2.What's a boinger?
3.Why does a rotary engine make as much power as a boinger twice its size?
4.Why does a Renesis make so much more power than prior rotaries?
5.How reliable is a rotary engine?
6.Is the rotary engine dead?
7.What do the 10A, 12A, 13B & 20B Mazda engine designations mean?
8.Why two spark plugs for each rotor?
9.What spark plugs should I use?
10.Why does my rotary Mazda have an oil cooler?
11.What oil should I use?
12.Should I use synthetic oil?
13.Do oil brands matter?
14.How often should I change my rotary engine's oil?
15.Should I mix oil in the fuel?
16.What's the best fuel for my rotary car?
17.What gas mileage should a rotary get?
18.Does a rotary have any booby traps I need to watch out for?
19.Will removing my thermostat help my rotary run cooler or make more power?
20.When should I shift?
21.What is an apex seal?
22.How do I know if my engine's apex seals are OK?
23.What should my engine's compression be?
24.What are the differences between earlier & later Mazda rotaries?
25.What are the differences between 6-Port & 4-Port rotaries?
26.How do I tell a 12A from a 13B?
27.What is a thermal reactor?
28.What's the best way to test changes I make that affect my car's power?
29.What if I switch to a light flywheel?
30.How do I get the old flywheel off?
31.How hard is it to stop oil from leaking?
32.O-rings? What o-rings?
33.What's that foamy stuff under the oil fill cap & inside the filler tube?
34.Why does my engine smoke when I first start it?
35.Why does my engine smoke when I shift at high RPM?
36.Why won't my engine start? What can I do to start it?
37.Why is my engine locked up, and what do I do about it?
38.My engine just failed its emissions test. Now what do I do?
39.What's the best way to make my rotary car accelerate quicker?
40.How hard would it be for me to rebuild my rotary?
41.What is porting all about?
42.Can I add a turbo to my NA?
43.Why is rotary exhaust replacement or improvement so expensive?
44.Why not hollow out the cats?
45.How do I remove my air pump?
46.How do I stop the backfiring?
47.How can I tell if my car has a limited-slip differential?
48.Where can I race my rotary car?
49.Corvttes, Mustngs, Firbirds, Camros, Porches & RX7s?
50.What are the RX-7 "generations"?
51.Which model RX-7 do I have? How do the various RX-7 models differ?
52.What other regular production cars have had rotary engines?
53.Why did Mazda stop selling the RX-7 in the US?
54.How do I subscribe/unsubscribe to the mailing list?
55.Is there an RX-7 club I can join?
56.My question's not on this list. Where do I go from here?

Plus, links to the RX-7 generational FAQ; tech goodies, such as the "Rotary
Parts Interchange" & "replacing 12A with 13B", in "The Garage"; links to
information on upcoming rotary models and rotary history; acronymn dictionary;
instructions for subscribing to mailing lists; links to vendors, like:

Mazda Auto Recycling
Mazdaformance
Mazdatrix
Racing Beat
Rotary Performance Online
Yaw Power Products

and much more.

Just click on URL below to get to Felix's.
--
"Blessed is the nation whose God is the Lord." Psalm 33:12 NIV

Team OS/2 ** Reg. Linux User #211409 ** Rotary ONLY since 1973

Felix Miata *** http://members.ij.net/mrmazda/ <- More than just a FAQ


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
Ads
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rotary Engine FAQ 0501 Felix Miata Driving 0 January 1st 05 01:27 PM
3.3L downshifting by self after replacing Engine Bob Warmen Chrysler 8 October 12th 04 05:39 PM
1965 MGB with Rotary Engine - wankel Mazda Rear View General 1 June 7th 04 03:57 PM


All times are GMT +1. The time now is 10:15 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.