New carburettor- At least for me.

wrote:
> Hi Jan,
>
> You don't need to mail all the jets :-) I will only need the 130 and
> maybe 132.5. Do you have any picture of the carb? It's a pity you
> didn't found any idle 60.
> Thanks for all the trouble.
>
> Joao
>


Does anyone else reading this need Solex jets? They should fit the
"Kadron" kit carbs and Brosols too.

I guess I'll be sending Joao these:

130
132.5
135


The idle jet in the carb iself is a 60, that's why I didn't get an
extra. The main jet is 132.

There's a little bit of play in the accelerator pump linkage due to
wear, I'll fill the worn area with a weld spot and re-drill the hole, so
it'll fit nicely. I'll try to get that done tomorrow.

Pictures:

http://www.kolumbus.fi/janandersson/VW/34pict3/34a.jpg
http://www.kolumbus.fi/janandersson/VW/34pict3/34b.jpg
http://www.kolumbus.fi/janandersson/VW/34pict3/34c.jpg
http://www.kolumbus.fi/janandersson/VW/34pict3/34d.jpg
http://www.kolumbus.fi/janandersson/VW/34pict3/34e.jpg
http://www.kolumbus.fi/janandersson/VW/34pict3/34f.jpg

Fairly clean, no grease, a little dried up. Needs to be taken apart for
cleaning anyway I guess.


Does this sound good?

Jan

Are you sure that the shaft is good?

Hi Jan,

Let me know when you send it.

TIA
João

wrote:
> Are you sure that the shaft is good?
>


It seems to be ok. Just a tiny little bit of play up and down.
I'll try to get the acc pump levcer welded tonight.

Jan

Don't spend a lot of time with it.
I noticed that it has a funny spring :-)

João

wrote:

> Don't spend a lot of time with it.
> I noticed that it has a funny spring :-)
>
> João
>


yea, looks like someone overstretched the spring and now it's sloppy
unless you attach it like that... lol.. a new spring would be nice but I
didn't have any

Jan

wrote:
> Jan Andersson escreveu:
>
wrote:
>>
>>
>>>Don't spend a lot of time with it.
>>>I noticed that it has a funny spring :-)
>>>
>>>João
>>>
>>
>>
>>yea, looks like someone overstretched the spring and now it's sloppy
>>unless you attach it like that... lol.. a new spring would be nice but I
>>didn't have any
>>
>>Jan
>
>
> Hi Jan,
>
> Do I have to send you back the shoes? LOL

Hehe, no, you can keep those
Courtesy of my company (I had to find something soft for packaging
material)


> I putted the main 132.5 and the idle 60. I was already run on the 60.
> I run a bit around the town and then to the rood 140/km/h during 1
> minute and the rest at 100Km/h during 15 minutes.
>
> This the colour of the spark #4
>
> http://i2.tinypic.com/qpmkjd.jpg
>
> I don't think its running rich!


No, it's not rich. It's looking pretty good, if anything it's still
lean. Try one step larger on the main jet.
Stay with 60 idle jet.

Jan