If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
FFB (December edition)
Well, I tested thoroughly Centering Spring at the position of 61%,
and decided that 22% is better. It looks like Spring and Damper should be the same. Spring and Damper at 100% is too much, at 61% is too low, so, it'll be between 100 and 61. |
Ads |
#2
|
|||
|
|||
FFB (December edition)
Mario Petrinovic:
> Well, I tested thoroughly Centering Spring at the position of 61%, > and decided that 22% is better. > It looks like Spring and Damper should be the same. > Spring and Damper at 100% is too much, at 61% is too low, so, it'll > be between 100 and 61. Well, it looks like Spring and Damper doesn't have to be the same. Damper will be something like 96-97%, while Spring will probably be in the low 70s. |
#3
|
|||
|
|||
FFB (December edition)
Mario Petrinovic:
> Mario Petrinovic: >> Well, I tested thoroughly Centering Spring at the position of 61%, >> and decided that 22% is better. >> It looks like Spring and Damper should be the same. >> Spring and Damper at 100% is too much, at 61% is too low, so, >> it'll be between 100 and 61. > > Well, it looks like Spring and Damper doesn't have to be the same. > Damper will be something like 96-97%, while Spring will probably be in the > low 70s. Ok, it looks like I got it. 118/67/77/22 works well. |
#4
|
|||
|
|||
FFB (December edition)
Mario Petrinovic:
> Mario Petrinovic: >> Mario Petrinovic: >>> Well, I tested thoroughly Centering Spring at the position of >>> 61%, >>> and decided that 22% is better. >>> It looks like Spring and Damper should be the same. >>> Spring and Damper at 100% is too much, at 61% is too low, so, >>> it'll be between 100 and 61. >> >> Well, it looks like Spring and Damper doesn't have to be the same. >> Damper will be something like 96-97%, while Spring will probably be in >> the >> low 70s. > > Ok, it looks like I got it. 118/67/77/22 works well. Well, I am abandoning the idea of Centering Spring at 22%. Maybe it will be the same as Damper and Spring, and these could be somewhere 50-66%. |
#5
|
|||
|
|||
FFB (December edition)
Mario Petrinovic:
> Mario Petrinovic: >> Mario Petrinovic: >>> Mario Petrinovic: >>>> Well, I tested thoroughly Centering Spring at the position of >>>> 61%, and decided that 22% is better. >>>> It looks like Spring and Damper should be the same. >>>> Spring and Damper at 100% is too much, at 61% is too low, so, >>>> it'll be between 100 and 61. >>> >>> Well, it looks like Spring and Damper doesn't have to be the >>> same. >>> Damper will be something like 96-97%, while Spring will probably be in >>> the low 70s. >> >> Ok, it looks like I got it. 118/67/77/22 works well. > > Well, I am abandoning the idea of Centering Spring at 22%. Maybe it > will be the same as Damper and Spring, and these could be somewhere > 50-66%. Actually, from previous testings (as I remember), it could very well be that the middle position is 50% for all three. I'll see. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FFB update | Mario Petrinovic | Simulators | 1 | October 15th 11 12:43 AM |
FFB (so far) | Mario Petrinovic | Simulators | 0 | September 25th 11 10:57 AM |
FFB | Mario Petrinovic | Simulators | 26 | September 5th 11 08:52 AM |
Secrets of FFB | Mario Petrinovic | Simulators | 2 | August 4th 11 06:10 PM |
G25 v. ECCI - To FFB or not to FFB | [email protected] | Simulators | 1 | August 17th 07 02:35 PM |