A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto newsgroups » Technology
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Solved, valve stem seal



 
 
Thread Tools Display Modes
  #1  
Old December 8th 17, 02:03 AM posted to rec.autos.tech
Ivan Vegvary[_2_]
external usenet poster
 
Posts: 57
Default Solved, valve stem seal

My cylinder head must have been remanufactured with fatter valve guides. The guides are 0.01 fatter than the inside diameter of the seals.
Having made the measurements the wonderful techs at Fel-pro specified a set that will be a correct fit on the stem but 0.005 too large on the guide. A stop of Locktite should obviate that problem.
Ads
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Valve stem seal help Ivan Vegvary[_2_] Technology 2 December 4th 17 03:38 AM
Valve Stem Seals Veeduber VW air cooled 1 January 25th 08 03:24 AM
Fix for high oil consumption - New Spark plug, new valve stem onnumber 5 and seal Mick x Audi 14 July 21st 07 01:15 PM
Tire valve stem Tom Y Technology 9 May 18th 07 08:53 PM
Tire Valve Stem dprkk Chrysler 7 March 12th 07 05:44 AM


All times are GMT +1. The time now is 10:29 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.