A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Alfa Romeo
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

PICS: BYE BYE to the Alfa Romeo 159



 
 
Thread Tools Display Modes
  #1  
Old September 2nd 11, 01:19 AM posted to alt.autos.alfa-romeo
JLA
external usenet poster
 
Posts: 85
Default PICS: BYE BYE to the Alfa Romeo 159

From IT Speed
************
The yanking last month of the Alfa 159 from the company’s UK
pricelists signals the wind-down of production of this D-segment
sedan, its sales on all markets being already limited to just small
handfuls.

With the replacement Giulia now delayed until at least the second half
of 2013, Alfa Romeo has built up stock of the 159 to see it through
until then, but production at the Naples factory has now been halted
so that the plant can tool up for the new Fiat Panda which debuts
next month. As a result, orders are no longer being taken for the
159, with buyers only able to choose from stock, comprised of a
drastically slimmed-down range – only two standard and two optional
extra colours and and one engine, the 2.0 MultiJet (with a base
starting price of 27,000 euros on the Italian market for the 136 CV
sedan).

The 159 and its estate spin-off, the 159 Sportwagon, were cars that
promised much but in the end never quite delivered. The 159 succeeded
the 156, giving it a very tough act to follow; the 156 had been one of
Alfa Romeo’s biggest hits in decades. Developed in the midst of the
ill-fated Fiat-GM joint venture, the 159 had a troubled gestation,
beginning life on the American carmaker’s Epsilon platform before
being shifted, relatively late in development, to the more
sophisticated but expensive Premium platform. This was done by Alfa
Romeo in an attempt to salvage the cost sunk in Premium, since the
projected 166 replacement to be built off the platform was merely
wishful thinking, and General Motors – itself concerned about the
cost of the platform – had steadily jettisoned its own projected
Premium models, including those earmarked for Cadillac, Buick and
Saab. However, this late transition to what was fundamentally
designed as an E-segment platform left the 159 compromised, and along
with its coupe and convertible sisters the Brera and Spider, saddled
with excessive weight when it hit the market.

Also on the debit side were the new car’s engines. Replacing Alfa
Romeo’s much-admired ‘Arese’ V6 engine, which was coming to the end
of its useable life, with a much less sparkling GM-sourced 3.2 V6,
failed to impress Alfisti, as did the 159’s four-cylinder petrol
engines, also sourced from the American alliance. The lacklustre
petrol efforts made the diesels, including the ubiquitous 1.9-litre
four-cylinder MultiJet and powerful and sonorous (albeit heavy)
2.4-litre five-pot, the pick of the range. Launching models with the
wrong engines has been a continual problem for Alfa Romeo, and the
addition of two strong engines that Alfisti would expect to find
under the bonnet (including the petrol 1750 TBi two years ago), came
too late in the day to make a sales impact.

Building on the success of the 156 (of which more than 600,000 were
built), the design brief for the 159, enacted by Giorgetto Giugiaro
in association with Alfa Romeo Centro Stile, was for evolution rather
than revolution. But although Giugiaro noted the 159 at the time
received the highest-ever score in customer clinics in the history of
Italdesign, the delays in the car’s development meant the car launched
at the Geneva Motor Show in 2005, just as automotive styling was
fundamentally moving towards more organic forms. Importantly, it also
grew significantly in size – adding some 225mm over its predecessor –
which helped disassociate itself from the huge collective of 156
buyers who were looking to trade in their cars for a replacement
model. Just as crucially, however, Alfa’s senior management as ever
misread the brand’s positioning in the eyes of customers and made the
fundamental error of trying to pitch the 159 squarely at BMW, Mercedes
and Audi owners.

Despite this, the 159 was not without plenty of attributes, chief
among which were its striking and elegant aesthetics. First
impressions from the media when it debuted at the Geneva Motor Show
in 2005 were highly positive. The front was dominated by a large,
vertical Alfa Romeo ‘family’ grille, flanked on each side by three
small lights, a very characteristic design first seen on the Brera
concept. (Unfortunately, this design’s poor aerodynamic
characteristics have seen Alfa move towards less distinctive front
ends in subsequent designs.) Swages running the full length of the
sides combined with the large C-pillars and slender A-pillars to give
the car a robust appearance, in an effort to finally combat
perceptions of Alfas being ‘fragile’. The overt use of all four door
handles (as opposed to the concealed rear handles on the 156)
likewise reinforced the size of the car. These features were designed
in particular with the American market in mind, and the 159 was
developed to U.S. homologation standards, although a comeback by the
brand to this market, as ever, was postponed. The rear echoed the
styling of the rest of the car, with small round inserts in the light
clusters and a horizontal theme echoed by the swaging, closely
referencing the 156. More powerful versions received exhaust systems
with twin tailpipes.

Because the Alfa 159 was a much larger car than its predecessor, it
provided a more comfortable interior, as well as a more engaging
driving position than the 156. With all the controls and instruments
well positioned around the driver, the Alfa 159 offered a
considerably more driver-biased interior than most of its rivals, the
turbo boost (or oil temperature for petrol engines) gauge being just
one example. Much higher quality materials that on the 156 were used,
blending the sporty feel of aluminium with leather.

With the 159 project, Alfa Romeo also aimed to reach new levels of
passive safety. The robust Premium floorpan was developed with this
in mind, and adopted high performance materials, multiple layers of
sheet metal and the use of laser welding. Traditional methods such as
boxed sections, increased welding in structural areas and longitudinal
members all helped make the car exceptionally safe in the case of an
incident. They also produced a very torsionally rigid bodyshell – one
of the most rigid on the market – which helped benefit ride and
handling, at the expense of kerb weight. In terms of active safety,
the Alfa 159 was well equipped with up to eight airbags (including
driver and passenger knee airbags), innovative restraint systems, and
front seats with an ‘anti-whiplash’ device, which moved the head
restraint nearer to the occupants’ necks in the event of a rear
impact.

At launch, there were three new ‘JTS’ (direct injection) petrol
engines, all with continuous dual variable valve timing on both inlet
and exhaust valves. Available were the aforementioned GM-sourced
3.2-litre 24-valve V6 delivering 260 bhp, featuring cylinder heads
reworked by Alfa Romeo’s engineers for its more performance-focused
application, a 2.2 16V generating 185 bhp, and a 1.9 16V (160 bhp).
Arriving later was a non-direct-injection 1.8 to lower the price
point of the 159. Developing 140bhp, it was shared with a variety of
GM models, as well as the Fiat Croma.

In terms of diesel options, there were another three units, a 2.4 JTDm
5-cylinder 20V engine (200 bhp) and two 1.9 JTDm engines – one with 16
valves and delivering 150 bhp at 4000 rpm, the other with 8 valves and
120 bhp. All these used the latest MultiJet development of the JTD
common-rail injection system as well as variable geometry
turbochargers and intercoolers. All the engines met Euro 4 standards,
whilst the diesels featured particulate traps (DPF) with a ‘for life’
system. These six launch engines were mated up to various
transmissions, all with six speeds. Both conventional manual and
robotised Selespeed units were offered, with conventional automatic
boxes, known as Q-Tronic, optional on some of the engines. The latter
could be operated as a conventional automatic or in sequential mode.
The Alfa 159 employed ‘high’ double wishbones at the front, and a
multilink setup at the rear. The 159 was also equipped with a full
array of electronic aids, including ABS, ASR, HBS, EBD, MSR and VDC.

On the 260bhp V6 version, the power was transmitted to all four wheels
through a permanent 4-wheel drive system with three differentials
(including a Torsen C self-locking central differential) developed
from that on the 159 Crosswagon Q4. This system split the torque
constantly and dynamically between the four wheels, the Torsen-C
self-locking central differential sending about 57% of the engine’s
output to the rear wheels and 43% to the front.

As is now the norm for such a class of car, numerous devices and
systems were fitted (or optional) to make life on board as
comfortable as possible, including cruise control, rain, dusk and
parking sensors (front and rear), a satellite navigation system,
voice controls, a built-in GSM hands-free telephone, automatic
climate control with dual or triple-zone temperatures, a radio-CD-MP3
player with 10-disc autochanger, a Bose Hi-Fi Sound System, seats with
electrical adjustment, folding rear seats, and a push-button ignition
switch on the console.

The estate version, known as the Sportwagon, emerged one year after
the saloon. Retaining the frontal styling of the saloon but adding a
true load-lugging rear end, it managed to look purposeful and
aggressive, even with its practical inclinations. Apart from the rear
bodywork, the Sportwagon was identical to the saloon, including the
same wheelbase and overall length.

In 2007 the 2.4 MultiJet diesel engine saw its power grow from 200bhp
to 210bhp, except when the Q-Tronic automatic transmission was
specified, in which case output remained at 200bhp. More changes came
in 2008, when a series of minor tweaks were made to the product and
range. A new system called ‘Electronic Q2’ was introduced, which
provides a similar functionality to a limited-slip differential by
using differential braking. A series of changes to the interior
included new fabrics, styles, dashboard, instruments and materials.
The 3.2 V6 became available with front-wheel-drive (previously only
available with AWD), while in a related attempt to lose the kilos, a
weight reduction programme was enacted, which saw the 159 lose around
45kg from the kerb weight.

Also in 2007, Alfa Romeo launched, at the 77th Geneva Motor Show, the
newly reborn Ti specification onto the 159 (the famous historical
designation was already available for the smaller Alfa 147). The Ti
(Turismo Internazionale) kit included 20mm lowered suspension, Brembo
braking system, 19” alloy wheels and high-performance 235/40 R19
tyres. Alfa Romeo's management also planned to extend the Ti makeover
to include mechanical improvements to enhance the performance of the
engines but this never materialised.

Unlike almost all its predecessors, the 159 never saw itself become
the focus of a factory-supported racing programme as by the time of
its launch in the middle of the last decade Alfa Romeo's management
had turned their backs on a century of sporting success, shunning the
brand's historic philosophy of beating rivals on track as the key
marketing yardstick. Some private racing efforts were however
undertaken by importers notably in Australia where in 2009 a 2.4
Multijet-powered Alfa 159 comfortably won the class reserved for
diesel-powered cars in the Bathurst 12 Hours.

Tuners also turned their attention to the 159, although working with
the new breed of direct injection engines raised the bar too high for
most. However, Alfa Romeo aftermarket design and tuning leader,
Autodelta, seized the opportunity to give the sedan the performance
it was lacking and turn it into the complete package; its
supercharged 3.2 litre V6 version hiked power from a standard 260 bhp
to 352 bhp while a similar forced induction makeover for the 2.2 litre
raised power from 145 bhp to 245 bhp.

The Geneva Show of 2009 saw a revised range launched, the most
significant development being the addition of two new engines. The
first was an all-new, high-performance turbocharged 1750 unit with
200bhp and direct injection, twin variable camshafts and unique
scavenging technology. The second was a 170bhp 2.0 JTDm turbocharged
diesel unit. An ECO version of the latter engine was later added,
which used different tyres and gear ratios to reduce the fuel
consumption and emissions. The arrival of these two highly capable
units soon led to the 159 abandoning its cluster of GM-sourced
engines; the Fiat-GM joint venture was long since history by this
point. Unfortunately, however they came too late to change
perceptions of the model amongst the general public. They were the
right engines - but at the wrong time; while the lack of a meaningful
mid-life facelift didn't help the model’s cause.

View the attachments for this post at:
http://www.jlaforums.com/viewtopic.p...0783#115820783

Ads
  #2  
Old September 2nd 11, 01:07 PM posted to alt.autos.alfa-romeo
Dave Savage[_3_]
external usenet poster
 
Posts: 62
Default BYE BYE to the Alfa Romeo 159


"JLA" > wrote in message
...
> From IT Speed
> ************
> The yanking last month of the Alfa 159 from the company’s UK
> pricelists signals the wind-down of production of this D-segment
> sedan, its sales on all markets being already limited to just small
> handfuls.
>
> With the replacement Giulia now delayed until at least the second half
> of 2013, Alfa Romeo has built up stock of the 159 to see it through
> until then, but production at the Naples factory has now been halted
> so that the plant can tool up for the new Fiat Panda which debuts
> next month. As a result, orders are no longer being taken for the
> 159, with buyers only able to choose from stock, comprised of a
> drastically slimmed-down range – only two standard and two optional
> extra colours and and one engine, the 2.0 MultiJet (with a base
> starting price of 27,000 euros on the Italian market for the 136 CV
> sedan).
>
> The 159 and its estate spin-off, the 159 Sportwagon, were cars that
> promised much but in the end never quite delivered. The 159 succeeded
> the 156, giving it a very tough act to follow; the 156 had been one of
> Alfa Romeo’s biggest hits in decades. Developed in the midst of the
> ill-fated Fiat-GM joint venture, the 159 had a troubled gestation,
> beginning life on the American carmaker’s Epsilon platform before
> being shifted, relatively late in development, to the more
> sophisticated but expensive Premium platform. This was done by Alfa
> Romeo in an attempt to salvage the cost sunk in Premium, since the
> projected 166 replacement to be built off the platform was merely
> wishful thinking, and General Motors – itself concerned about the
> cost of the platform – had steadily jettisoned its own projected
> Premium models, including those earmarked for Cadillac, Buick and
> Saab. However, this late transition to what was fundamentally
> designed as an E-segment platform left the 159 compromised, and along
> with its coupe and convertible sisters the Brera and Spider, saddled
> with excessive weight when it hit the market.
>
> Also on the debit side were the new car’s engines. Replacing Alfa
> Romeo’s much-admired ‘Arese’ V6 engine, which was coming to the end
> of its useable life, with a much less sparkling GM-sourced 3.2 V6,
> failed to impress Alfisti, as did the 159’s four-cylinder petrol
> engines, also sourced from the American alliance. The lacklustre
> petrol efforts made the diesels, including the ubiquitous 1.9-litre
> four-cylinder MultiJet and powerful and sonorous (albeit heavy)
> 2.4-litre five-pot, the pick of the range. Launching models with the
> wrong engines has been a continual problem for Alfa Romeo, and the
> addition of two strong engines that Alfisti would expect to find
> under the bonnet (including the petrol 1750 TBi two years ago), came
> too late in the day to make a sales impact.
>
> Building on the success of the 156 (of which more than 600,000 were
> built), the design brief for the 159, enacted by Giorgetto Giugiaro
> in association with Alfa Romeo Centro Stile, was for evolution rather
> than revolution. But although Giugiaro noted the 159 at the time
> received the highest-ever score in customer clinics in the history of
> Italdesign, the delays in the car’s development meant the car launched
> at the Geneva Motor Show in 2005, just as automotive styling was
> fundamentally moving towards more organic forms. Importantly, it also
> grew significantly in size – adding some 225mm over its predecessor –
> which helped disassociate itself from the huge collective of 156
> buyers who were looking to trade in their cars for a replacement
> model. Just as crucially, however, Alfa’s senior management as ever
> misread the brand’s positioning in the eyes of customers and made the
> fundamental error of trying to pitch the 159 squarely at BMW, Mercedes
> and Audi owners.
>
> Despite this, the 159 was not without plenty of attributes, chief
> among which were its striking and elegant aesthetics. First
> impressions from the media when it debuted at the Geneva Motor Show
> in 2005 were highly positive. The front was dominated by a large,
> vertical Alfa Romeo ‘family’ grille, flanked on each side by three
> small lights, a very characteristic design first seen on the Brera
> concept. (Unfortunately, this design’s poor aerodynamic
> characteristics have seen Alfa move towards less distinctive front
> ends in subsequent designs.) Swages running the full length of the
> sides combined with the large C-pillars and slender A-pillars to give
> the car a robust appearance, in an effort to finally combat
> perceptions of Alfas being ‘fragile’. The overt use of all four door
> handles (as opposed to the concealed rear handles on the 156)
> likewise reinforced the size of the car. These features were designed
> in particular with the American market in mind, and the 159 was
> developed to U.S. homologation standards, although a comeback by the
> brand to this market, as ever, was postponed. The rear echoed the
> styling of the rest of the car, with small round inserts in the light
> clusters and a horizontal theme echoed by the swaging, closely
> referencing the 156. More powerful versions received exhaust systems
> with twin tailpipes.
>
> Because the Alfa 159 was a much larger car than its predecessor, it
> provided a more comfortable interior, as well as a more engaging
> driving position than the 156. With all the controls and instruments
> well positioned around the driver, the Alfa 159 offered a
> considerably more driver-biased interior than most of its rivals, the
> turbo boost (or oil temperature for petrol engines) gauge being just
> one example. Much higher quality materials that on the 156 were used,
> blending the sporty feel of aluminium with leather.
>
> With the 159 project, Alfa Romeo also aimed to reach new levels of
> passive safety. The robust Premium floorpan was developed with this
> in mind, and adopted high performance materials, multiple layers of
> sheet metal and the use of laser welding. Traditional methods such as
> boxed sections, increased welding in structural areas and longitudinal
> members all helped make the car exceptionally safe in the case of an
> incident. They also produced a very torsionally rigid bodyshell – one
> of the most rigid on the market – which helped benefit ride and
> handling, at the expense of kerb weight. In terms of active safety,
> the Alfa 159 was well equipped with up to eight airbags (including
> driver and passenger knee airbags), innovative restraint systems, and
> front seats with an ‘anti-whiplash’ device, which moved the head
> restraint nearer to the occupants’ necks in the event of a rear
> impact.
>
> At launch, there were three new ‘JTS’ (direct injection) petrol
> engines, all with continuous dual variable valve timing on both inlet
> and exhaust valves. Available were the aforementioned GM-sourced
> 3.2-litre 24-valve V6 delivering 260 bhp, featuring cylinder heads
> reworked by Alfa Romeo’s engineers for its more performance-focused
> application, a 2.2 16V generating 185 bhp, and a 1.9 16V (160 bhp).
> Arriving later was a non-direct-injection 1.8 to lower the price
> point of the 159. Developing 140bhp, it was shared with a variety of
> GM models, as well as the Fiat Croma.
>
> In terms of diesel options, there were another three units, a 2.4 JTDm
> 5-cylinder 20V engine (200 bhp) and two 1.9 JTDm engines – one with 16
> valves and delivering 150 bhp at 4000 rpm, the other with 8 valves and
> 120 bhp. All these used the latest MultiJet development of the JTD
> common-rail injection system as well as variable geometry
> turbochargers and intercoolers. All the engines met Euro 4 standards,
> whilst the diesels featured particulate traps (DPF) with a ‘for life’
> system. These six launch engines were mated up to various
> transmissions, all with six speeds. Both conventional manual and
> robotised Selespeed units were offered, with conventional automatic
> boxes, known as Q-Tronic, optional on some of the engines. The latter
> could be operated as a conventional automatic or in sequential mode.
> The Alfa 159 employed ‘high’ double wishbones at the front, and a
> multilink setup at the rear. The 159 was also equipped with a full
> array of electronic aids, including ABS, ASR, HBS, EBD, MSR and VDC.
>
> On the 260bhp V6 version, the power was transmitted to all four wheels
> through a permanent 4-wheel drive system with three differentials
> (including a Torsen C self-locking central differential) developed
> from that on the 159 Crosswagon Q4. This system split the torque
> constantly and dynamically between the four wheels, the Torsen-C
> self-locking central differential sending about 57% of the engine’s
> output to the rear wheels and 43% to the front.
>
> As is now the norm for such a class of car, numerous devices and
> systems were fitted (or optional) to make life on board as
> comfortable as possible, including cruise control, rain, dusk and
> parking sensors (front and rear), a satellite navigation system,
> voice controls, a built-in GSM hands-free telephone, automatic
> climate control with dual or triple-zone temperatures, a radio-CD-MP3
> player with 10-disc autochanger, a Bose Hi-Fi Sound System, seats with
> electrical adjustment, folding rear seats, and a push-button ignition
> switch on the console.
>
> The estate version, known as the Sportwagon, emerged one year after
> the saloon. Retaining the frontal styling of the saloon but adding a
> true load-lugging rear end, it managed to look purposeful and
> aggressive, even with its practical inclinations. Apart from the rear
> bodywork, the Sportwagon was identical to the saloon, including the
> same wheelbase and overall length.
>
> In 2007 the 2.4 MultiJet diesel engine saw its power grow from 200bhp
> to 210bhp, except when the Q-Tronic automatic transmission was
> specified, in which case output remained at 200bhp. More changes came
> in 2008, when a series of minor tweaks were made to the product and
> range. A new system called ‘Electronic Q2’ was introduced, which
> provides a similar functionality to a limited-slip differential by
> using differential braking. A series of changes to the interior
> included new fabrics, styles, dashboard, instruments and materials.
> The 3.2 V6 became available with front-wheel-drive (previously only
> available with AWD), while in a related attempt to lose the kilos, a
> weight reduction programme was enacted, which saw the 159 lose around
> 45kg from the kerb weight.
>
> Also in 2007, Alfa Romeo launched, at the 77th Geneva Motor Show, the
> newly reborn Ti specification onto the 159 (the famous historical
> designation was already available for the smaller Alfa 147). The Ti
> (Turismo Internazionale) kit included 20mm lowered suspension, Brembo
> braking system, 19” alloy wheels and high-performance 235/40 R19
> tyres. Alfa Romeo's management also planned to extend the Ti makeover
> to include mechanical improvements to enhance the performance of the
> engines but this never materialised.
>
> Unlike almost all its predecessors, the 159 never saw itself become
> the focus of a factory-supported racing programme as by the time of
> its launch in the middle of the last decade Alfa Romeo's management
> had turned their backs on a century of sporting success, shunning the
> brand's historic philosophy of beating rivals on track as the key
> marketing yardstick. Some private racing efforts were however
> undertaken by importers notably in Australia where in 2009 a 2.4
> Multijet-powered Alfa 159 comfortably won the class reserved for
> diesel-powered cars in the Bathurst 12 Hours.
>
> Tuners also turned their attention to the 159, although working with
> the new breed of direct injection engines raised the bar too high for
> most. However, Alfa Romeo aftermarket design and tuning leader,
> Autodelta, seized the opportunity to give the sedan the performance
> it was lacking and turn it into the complete package; its
> supercharged 3.2 litre V6 version hiked power from a standard 260 bhp
> to 352 bhp while a similar forced induction makeover for the 2.2 litre
> raised power from 145 bhp to 245 bhp.
>
> The Geneva Show of 2009 saw a revised range launched, the most
> significant development being the addition of two new engines. The
> first was an all-new, high-performance turbocharged 1750 unit with
> 200bhp and direct injection, twin variable camshafts and unique
> scavenging technology. The second was a 170bhp 2.0 JTDm turbocharged
> diesel unit. An ECO version of the latter engine was later added,
> which used different tyres and gear ratios to reduce the fuel
> consumption and emissions. The arrival of these two highly capable
> units soon led to the 159 abandoning its cluster of GM-sourced
> engines; the Fiat-GM joint venture was long since history by this
> point. Unfortunately, however they came too late to change
> perceptions of the model amongst the general public. They were the
> right engines - but at the wrong time; while the lack of a meaningful
> mid-life facelift didn't help the model’s cause.
>
> View the attachments for this post at:
> http://www.jlaforums.com/viewtopic.p...0783#115820783
>


Perhaps somebody should pass this news on to Alfa UK - their configurator
still seems to have loads of options. Typical.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
It's A done deal now official, bye bye Pontiac and Saturn Doby Car Show Photos 2 April 27th 09 11:18 PM
Bye Bye E39, hello E46. Alarm help needed please. persist BMW 0 November 10th 06 10:07 PM
Bye bye Alfa Scott McGregor Alfa Romeo 6 August 16th 06 08:07 AM


All times are GMT +1. The time now is 06:29 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.