emergency brake

-- Hi

My 2002 Mazda 626 Emergency Brake does not work. WHen I park and pull up
the handbrake, it won't stick. The brake comes right back down. I guess
something is wrong after I drove over a big pot hole. I wonder what could
go wrong with it. Does anyone know how to fix it? Thanks for your input.

"DD" > wrote in message
news:dgI2e.25616$Ax.17178@trnddc04...
>
>
> -- Hi
>
> My 2002 Mazda 626 Emergency Brake does not work. WHen I park and pull up
> the handbrake, it won't stick. The brake comes right back down. I guess
> something is wrong after I drove over a big pot hole. I wonder what could
> go wrong with it. Does anyone know how to fix it? Thanks for your input.

Could the cable have snapped?

Dan TM.

Probably not connected to the pothole incident and probably not a broken
cable.

When you apply the brake, the handle is held up by a pawl that ratchets on a
set of teeth near the axis of the handle mechanism. When you release the
brake you push a button that pulls the pawl off the teeth. Most likely
something is wrong with this ratcheting pawl mechanism, maybe a broken
spring. You might have to remove the center console to work on it, but this
might be an easy thing to fix.

Before removing the console, try pushing and releasing the release button
several times to see if you can free up the mechanism (the button might be
stuck in)and maybe you could pull the cover or trim out of the way and spray
a little WD40 on the mechanism.

Good luck,
John

"DD" > wrote in message
news:dgI2e.25616$Ax.17178@trnddc04...
>
>
> -- Hi
>
> My 2002 Mazda 626 Emergency Brake does not work. WHen I park and pull up
> the handbrake, it won't stick. The brake comes right back down. I guess
> something is wrong after I drove over a big pot hole. I wonder what could
> go wrong with it. Does anyone know how to fix it? Thanks for your input.
>