If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Is this a drop-in for a 1968 Mustang coupe?
My coupe is the 289 2V model - is this a good fit and how much is it worth?
FORD 9" 3.70 POSI 28 SPLINE 67-70 MUSTANG HOUSING http://cgi.ebay.com/ebaymotors/ws/eB...keTra ck=true Thanks! Thomas |
Ads |
#2
|
|||
|
|||
In article >, Thomas Cameron
> wrote: > My coupe is the 289 2V model - is this a good fit and how much is it worth? > > FORD 9" 3.70 POSI 28 SPLINE 67-70 MUSTANG HOUSING > > > http://cgi.ebay.com/ebaymotors/ws/eB...37564709&fromM > akeTrack=true > > Thanks! > Thomas > > Yes it bolts in, but the Buy It Now price is too high for what it is. IF you plan on a 460 swap you should be looking at an N case (stronger than the single rib case here) and a 31-spline carrier instead of the 28 (which is what you have now). The 4-pinion Trac-lok *is* better than a 2-pinion. This rearend for auction would be fine for a mild 351 or 390, which is probably what the original car had. -- CobraJet |
#3
|
|||
|
|||
"CobraJet" > wrote in message
... > In article >, Thomas Cameron > > wrote: > >> My coupe is the 289 2V model - is this a good fit and how much is it >> worth? >> >> FORD 9" 3.70 POSI 28 SPLINE 67-70 MUSTANG HOUSING >> >> >> http://cgi.ebay.com/ebaymotors/ws/eB...37564709&fromM >> akeTrack=true >> >> Thanks! >> Thomas >> >> > > Yes it bolts in, but the Buy It Now price is too high for what it > is. IF you plan on a 460 swap you should be looking at an N case > (stronger than the single rib case here) and a 31-spline carrier > instead of the 28 (which is what you have now). The 4-pinion Trac-lok > *is* better than a 2-pinion. This rearend for auction would be fine for > a mild 351 or 390, which is probably what the original car had. > > -- > CobraJet Thanks, CobraJet! Much appreciated! The seller has offered it to me for $650, but I think I will wait and find the rear end you recommend. What would I look for on eBay? What are the search terms - I'm guessing searches with "N case" and "31" would work? Thanks a million! Thomas |
#4
|
|||
|
|||
In article >, Thomas Cameron
> wrote: > "CobraJet" > wrote in message > ... > > In article >, Thomas Cameron > > > wrote: > > > >> My coupe is the 289 2V model - is this a good fit and how much is it > >> worth? > >> > >> FORD 9" 3.70 POSI 28 SPLINE 67-70 MUSTANG HOUSING > >> > >> > >> > >> http://cgi.ebay.com/ebaymotors/ws/eB...=4537564709&fr > >> omM > >> akeTrack=true > >> > >> Thanks! > >> Thomas > >> > >> > > > > Yes it bolts in, but the Buy It Now price is too high for what it > > is. IF you plan on a 460 swap you should be looking at an N case > > (stronger than the single rib case here) and a 31-spline carrier > > instead of the 28 (which is what you have now). The 4-pinion Trac-lok > > *is* better than a 2-pinion. This rearend for auction would be fine for > > a mild 351 or 390, which is probably what the original car had. > > > > -- > > CobraJet > > Thanks, CobraJet! Much appreciated! > > The seller has offered it to me for $650, but I think I will wait and find > the rear end you recommend. What would I look for on eBay? What are the > search terms - I'm guessing searches with "N case" and "31" would work? Are you proceeding with the 460 swap plan? If so, I can give you a better game plan over in the Big Block group. I'm not long for here. Some people are starting to bore the hell out of me. > > Thanks a million! I'll just take a thousand. You can send it to me through PaySnake. > Thomas > > -- CobraJet |
#5
|
|||
|
|||
Awwwww, geeeeeee. I'm sorry. I didn't mean to bore you. I'll try harder not to if you stick around.... : ) On Mon, 28 Mar 2005 16:13:53 -0700, CobraJet > wrote: >In article >, Thomas Cameron > wrote: > >> "CobraJet" > wrote in message >> ... >> > In article >, Thomas Cameron >> > > wrote: >> > >> >> My coupe is the 289 2V model - is this a good fit and how much is it >> >> worth? >> >> >> >> FORD 9" 3.70 POSI 28 SPLINE 67-70 MUSTANG HOUSING >> >> >> >> >> >> >> >> http://cgi.ebay.com/ebaymotors/ws/eB...=4537564709&fr >> >> omM >> >> akeTrack=true >> >> >> >> Thanks! >> >> Thomas >> >> >> >> >> > >> > Yes it bolts in, but the Buy It Now price is too high for what it >> > is. IF you plan on a 460 swap you should be looking at an N case >> > (stronger than the single rib case here) and a 31-spline carrier >> > instead of the 28 (which is what you have now). The 4-pinion Trac-lok >> > *is* better than a 2-pinion. This rearend for auction would be fine for >> > a mild 351 or 390, which is probably what the original car had. >> > >> > -- >> > CobraJet >> >> Thanks, CobraJet! Much appreciated! >> >> The seller has offered it to me for $650, but I think I will wait and find >> the rear end you recommend. What would I look for on eBay? What are the >> search terms - I'm guessing searches with "N case" and "31" would work? > > Are you proceeding with the 460 swap plan? If so, I can give you a >better game plan over in the Big Block group. I'm not long for here. >Some people are starting to bore the hell out of me. > >> >> Thanks a million! > > I'll just take a thousand. You can send it to me through PaySnake. > >> Thomas >> >> Hey! Spikey Likes IT! 1965 Ford Mustang fastback 2+2 A Code 289 C4 Trac-Lok Vintage Burgundy w/Black Standard Interior Vintage 40 Wheels 16X8" w/BF Goodrich Comp T/A Radial 225/50ZR16 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FORD TO INCREASE MUSTANG PRODUCTION TO MEET RUNAWAY CONSUMER DEMAND | Grover C. McCoury III | Ford Mustang | 1 | March 23rd 05 11:08 PM |
1968 Ford Mustang commercial | Markansas | Ford Mustang | 0 | February 5th 05 09:06 AM |
Mustang Returns to Sports Car Racing | Grover C. McCoury III | Ford Mustang | 0 | January 29th 05 05:39 PM |
21st Century Goat vs Mustang Shootout | [email protected] | Ford Mustang | 1 | January 15th 05 06:09 PM |
FS: "1968 Ford Mustang GT500" Press-Sheet Litho | J.R. Sinclair | General | 0 | August 26th 04 05:15 AM |