Autolite distributor lower bushing - '65 289 single point

Anybody have any insight where I might be able to locate the lower bushing
for this distributor? I've got it cleaned up and rebuilt but the bushing is
incredibly loose and sloppy on the shaft, about 1/2mm of play. Everything
else is in excellent shape.
If it helps, the numbers on the dist. housing a
C5AF 12127 in the stamped "label" area just under where the cap sits
C5OF-12131-A vertically on the shaft area.

Thanks
Mike

I had the same slop in my car, I took distributer to a rebuilder near me
and he checked it out said it was normal. Otherwise they use standard
bushing size and then ream to spec.

Mike Lenker wrote:
> Anybody have any insight where I might be able to locate the lower
> bushing for this distributor? I've got it cleaned up and rebuilt but
> the bushing is incredibly loose and sloppy on the shaft, about 1/2mm of
> play. Everything else is in excellent shape.
> If it helps, the numbers on the dist. housing a
> C5AF 12127 in the stamped "label" area just under where the cap sits
> C5OF-12131-A vertically on the shaft area.
>
> Thanks
> Mike