If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1992 Chevy Lumina p/s lines - how to tell them apart?
the hose nearest the right/passenger fender is leaking/gushing some.
Is that the return line or the high pressure line? Something tells me it's the return line, but in my twisted little mind most logic is skewed. Please help. Thanks. |
Ads |
#2
|
|||
|
|||
1992 Chevy Lumina p/s lines - how to tell them apart?
"Chris" > wrote in message ... > the hose nearest the right/passenger fender is leaking/gushing some. > Is that the return line or the high pressure line? Something tells me > it's the return line, but in my twisted little mind most logic is > skewed. Please help. Thanks. I dont remember, but I have been there and done that. Remember that the power steering pump HP side can put out around 1000 psi, give or take, when the engine is operating at road speed, and leaks are more common in the high pressure side. Sometimes a pinhole leak will "paint" the engine compartment with PS fluid. It is somewhat less likely that you will get a significant leak in a low pressure line, but not impossible. Third point, it can be really hard to find leaks sometimes. I have had some bad luck with GM pumps leaking around the shaft, and when they are fairly slight leaks they can look like the fitting end of the hose is leaking. So clean it up and look carefully for the leak before starting to replace hoses or pumps helterskelter. If the pump is leaking at the shaft, dont even think about trying to rebuild it yourself. It can be done, but in my experience it wont last. Just my 2 centavos. |
#3
|
|||
|
|||
1992 Chevy Lumina p/s lines - how to tell them apart?
"Chris" > wrote in message ... > the hose nearest the right/passenger fender is leaking/gushing some. > Is that the return line or the high pressure line? Something tells me > it's the return line, but in my twisted little mind most logic is > skewed. Please help. Thanks. I had a 85 GM car. Same problem. Looked like the hose crimp or the fitting.. Turned out it was the pressed in cover on the PS pump. Replaced the pump. ww |
#4
|
|||
|
|||
1992 Chevy Lumina p/s lines - how to tell them apart?
Chris wrote:
> the hose nearest the right/passenger fender is leaking/gushing some. > Is that the return line or the high pressure line? Something tells me > it's the return line, but in my twisted little mind most logic is > skewed. Please help. Thanks. Check online for pics. This is the low side: http://www.racepages.com/products/?D...94963353&Nty=1 The return hose is ordinary hose. Just like on my Grand Am. Both hoses eventually leaked on mine with the return going bad about 5 years before the high pressure one did. |
#5
|
|||
|
|||
1992 Chevy Lumina p/s lines - how to tell them apart?
"Paul" > wrote in message ... > Both hoses eventually leaked on mine with the return going > bad about 5 years before the high pressure one did. On my personal car, I used ATF as the PS fluid.. Damn me, I didnt read the owners manual. I always figured the ATF ate up my system.. Maybe not, but you have to blame something. GM has a tour in Hell to walk about more things than one. |
#6
|
|||
|
|||
1992 Chevy Lumina p/s lines - how to tell them apart?
hls wrote:
> > "Paul" > wrote in message > ... > >> Both hoses eventually leaked on mine with the return going >> bad about 5 years before the high pressure one did. > > On my personal car, I used ATF as the PS fluid.. Damn me, I didnt read > the owners > manual. I always figured the ATF ate up my system.. Maybe not, but you > have > to blame something. > > GM has a tour in Hell to walk about more things than one. All of my GM's went 225k+ miles before the scrapyards got them, but at an expense of $200 per month in parts not including regular maintenance items. It will be interesting to see if my Kia makes it that far. It has 60k now and no repairs so far. |
#7
|
|||
|
|||
1992 Chevy Lumina p/s lines - how to tell them apart?
"Paul" > wrote in message ... > > All of my GM's went 225k+ miles before the scrapyards got them, > but at an expense of $200 per month in parts not including > regular maintenance items. It will be interesting to see if > my Kia makes it that far. It has 60k now and no repairs so far. It took me a while to realize the subpar result I was getting with GM autos, starting back in the 80's. And as I became more aware of it, the angrier I got...with myself as well as with GM. I hope you have good luck with your Kia. Hyundai, the mothership of Kia I think, seems to be making gross strides in terms of quality, performance and design. I have heard speculation that Kia may disappear from the market, with Hyundai expanding to fill the gap. |
#8
|
|||
|
|||
1992 Chevy Lumina p/s lines - how to tell them apart?
On Sep 20, 7:44 am, "hls" > wrote:
> It took me a while to realize the subpar result I was getting with GM > autos, starting back in the 80's. And as I became more aware of > it, the angrier I got...with myself as well as with GM. Funny. I bought a Beretta (2.8 l. engine) new in 1989. Ran it for 205,000 miles. Replaced the heater core and a crankshaft senser in that time period. O ok, there was that 6 weeks though where the car wouldn't turn over (something to do w/moisture I think, somewhere). Just let it sit during that time LOL. I bought this thing w/88,000 miles on it for 500$ (the Lumina that is). Got 141,000 now. My first problem was this hose (I just keep filling it for now). You must have a skill for picking the bad ones man. For the most part (75-80% of the time, or even significantly better), I get an excellent highly reliable nearly maintenance free vehicle. Let's here it! - GM! GM! GM! GM! |
#9
|
|||
|
|||
1992 Chevy Lumina p/s lines - how to tell them apart?
On Sep 20, 7:44 am, "hls" > wrote:
> It took me a while to realize the subpar result I was getting with GM > autos, starting back in the 80's. And as I became more aware of > it, the angrier I got...with myself as well as with GM. Funny. I bought a Beretta (2.8 l. engine) new in 1989. Ran it for 205,000 miles. Replaced the heater core and a crankshaft senser in that time period. O ok, there was that 6 weeks though where the car wouldn't turn over (something to do w/moisture I think, somewhere). Just let it sit during that time LOL. I bought this thing w/88,000 miles on it for 500$ (the Lumina that is). Got 141,000 now. My first problem was this hose (I just keep filling it for now). You must have a skill for picking the bad ones man. For the most part (75-80% of the time, or even significantly better), I get an excellent highly reliable nearly maintenance free vehicle. Let's here it! - GM! GM! GM! GM! |
#10
|
|||
|
|||
1992 Chevy Lumina p/s lines - how to tell them apart?
"Chris" > wrote in message news:5bf1226f-b01f- > You must have a skill for picking the bad ones man. Yes, I did..GM, GM, GM, GM |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2 issues - 1992 Chevy Lumina sedan | JustMe | Technology | 1 | April 22nd 09 03:46 PM |
1992 Chevy Lumina 6 cylinder radiator fans not coming on | Roscoe[_1_] | Technology | 7 | August 13th 06 07:08 AM |
1992 Lumina Sedan,Bucks and jerks on normal acceleration after warmed up? | Kennn | Technology | 1 | July 16th 06 05:33 PM |
1992 Lumina Sedan,Bucks and jerks on normal acceleration after warmed up? | Kennn[_1_] | Technology | 2 | July 13th 06 01:27 AM |
1992 Chevy Lumina Z-34 Coupe | judd | General | 0 | March 20th 05 04:33 PM |