exhaust

iv got a 97 3.8 v6 and i want to change the exhaust but i cant figuer
out how to git the old off because i dont want to cut it is there any
way to do that

wrote:
> iv got a 97 3.8 v6 and i want to change the exhaust but i cant figuer
> out how to git the old off because i dont want to cut it is there any
> way to do that

After they've been together for a few years, it's a
real pain to take them apart at the slip joints. If
you live in salt country, it will be darn near
impossible.

Just break out the sawzall and cut it off.

--
..boB
2006 FXDI hot rod
2001 Dodge Dakota QC 5.9/4x4/3.92
1966 Mustang Coupe - Daily Driver
1965 FFR Cobra - 427W EFI, Damn Fast.

".boB" > wrote in message
om...
> wrote:
>> iv got a 97 3.8 v6 and i want to change the exhaust but i cant figuer
>> out how to git the old off because i dont want to cut it is there any
>> way to do that
>
> After they've been together for a few years, it's a real pain to take them
> apart at the slip joints. If you live in salt country, it will be darn
> near impossible.
>
> Just break out the sawzall and cut it off.
>
> --
> .boB
> 2006 FXDI hot rod
> 2001 Dodge Dakota QC 5.9/4x4/3.92
> 1966 Mustang Coupe - Daily Driver
> 1965 FFR Cobra - 427W EFI, Damn Fast.
>

if no saw, if no torch, beat it off with a hammer
What else are you going to do?

On Jan 14, 4:58 am, "noman" > wrote:
> ".boB" > wrote in message
>
> om...
>
>
>
> > wrote:
> >> iv got a 97 3.8 v6 and i want to change the exhaust but i cant figuer
> >> out how to git the old off because i dont want to cut it is there any
> >> way to do that
>
> > After they've been together for a few years, it's a real pain to take them
> > apart at the slip joints. If you live in salt country, it will be darn
> > near impossible.
>
> > Just break out the sawzall and cut it off.
>
> > --
> > .boB
> > 2006 FXDI hot rod
> > 2001 Dodge Dakota QC 5.9/4x4/3.92
> > 1966 Mustang Coupe - Daily Driver
> > 1965 FFR Cobra - 427W EFI, Damn Fast.
>
> if no saw, if no torch, beat it off with a hammer
> What else are you going to do?

Can try heating with a torch before applying the hammer...