If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
exhaust manifold minor crack 99 cherokee 4.0L
Please advise on best alternative for repair. Dealer quotes...$420
repair (weld), $740 replace w/aftermarket part, $920 replace w/oem part. No real noticable sound problems coming from vehicle yet. Crack was picked up when doing 100,000 mi major service. I am worried about the weld not lasting...but dealer says that this is the way that most of his customers have gone with similar crack. I plan on keeping the vehicle for at least 2 more years. Also, I do not know if I have the old (prone to trouble) manifold design or if I have the new one. Can you tell just by the model year or should I ask the dealer? |
Ads |
#2
|
|||
|
|||
exhaust manifold minor crack 99 cherokee 4.0L
Welding is temporary at best, it will fail right next to the welded
crack next time. I've read many reports of good success with the newer designed headers sold on eBay, which are similar to how the factory header was redesigned to stop the cracking that happened to yours. I'd go that way rather than spend that much money at the dealer. Jerry MikeL wrote: > Please advise on best alternative for repair. Dealer quotes...$420 > repair (weld), $740 replace w/aftermarket part, $920 replace w/oem > part. No real noticable sound problems coming from vehicle yet. Crack > was picked up when doing 100,000 mi major service. I am worried about > the weld not lasting...but dealer says that this is the way that most > of his customers have gone with similar crack. I plan on keeping the > vehicle for at least 2 more years. Also, I do not know if I have the > old (prone to trouble) manifold design or if I have the new one. Can > you tell just by the model year or should I ask the dealer? > -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
#3
|
|||
|
|||
exhaust manifold minor crack 99 cherokee 4.0L
MikeL did pass the time by typing:
> Please advise on best alternative for repair. Dealer quotes...$420 > repair (weld), $740 replace w/aftermarket part, $920 replace w/oem > part. No real noticable sound problems coming from vehicle yet. Crack > was picked up when doing 100,000 mi major service. I am worried about > the weld not lasting...but dealer says that this is the way that most > of his customers have gone with similar crack. I plan on keeping the > vehicle for at least 2 more years. Also, I do not know if I have the > old (prone to trouble) manifold design or if I have the new one. Can > you tell just by the model year or should I ask the dealer? Try aftermarket and a few hours of work.. http://revbeergoggles.com/banks/ Actually I'd also contact the MFG since this is a known problem http://www.gtelaw.com/jeepclassactio...formation.html -- DougW |
#4
|
|||
|
|||
exhaust manifold minor crack 99 cherokee 4.0L
Whatever you do, don't pay $420 for a weld job. That's insane. I took off
my manifold and had it welded by a local guy for $10. Took him less than 10 minutes with a TIG welder. It will take you *maybe* two hours to remove and reinstall the exhaust manifold ... most likely less. It may crack again as Jerry said, but at least I'm not out any money. Good luck. "MikeL" > wrote in message oups.com... > Please advise on best alternative for repair. Dealer quotes...$420 > repair (weld), $740 replace w/aftermarket part, $920 replace w/oem > part. No real noticable sound problems coming from vehicle yet. Crack > was picked up when doing 100,000 mi major service. I am worried about > the weld not lasting...but dealer says that this is the way that most > of his customers have gone with similar crack. I plan on keeping the > vehicle for at least 2 more years. Also, I do not know if I have the > old (prone to trouble) manifold design or if I have the new one. Can > you tell just by the model year or should I ask the dealer? > |
#5
|
|||
|
|||
exhaust manifold minor crack 99 cherokee 4.0L
http://www.1aauto.com/1A/ExhaustMani...EM00147/146513
God Bless America, Bill O|||||||O http://www.billhughes.com/ MikeL wrote: > > Please advise on best alternative for repair. Dealer quotes...$420 > repair (weld), $740 replace w/aftermarket part, $920 replace w/oem > part. No real noticable sound problems coming from vehicle yet. Crack > was picked up when doing 100,000 mi major service. I am worried about > the weld not lasting...but dealer says that this is the way that most > of his customers have gone with similar crack. I plan on keeping the > vehicle for at least 2 more years. Also, I do not know if I have the > old (prone to trouble) manifold design or if I have the new one. Can > you tell just by the model year or should I ask the dealer? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Questions about Repairing My Exhaust | Julie P. | Technology | 12 | April 7th 05 09:54 PM |
Anyone have instructions or link for replacing exhaust manifold on a 4.0L FI | [email protected] | Jeep | 2 | April 3rd 05 04:16 AM |
4.0L wrangler: Replace a manifold myself or have a mechanic do it? | [email protected] | Jeep | 10 | March 28th 05 04:02 PM |
91 Accord LX 2.2L exhaust manifold cracked | Arthur Russell | Honda | 1 | December 19th 04 04:08 AM |
Exhaust Manifold / Header question (1996 Accord EX) | Chip Stein | Honda | 0 | September 22nd 04 02:23 AM |