A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto newsgroups » Technology
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Haynes manual instructions



 
 
Thread Tools Display Modes
  #1  
Old December 8th 04, 04:04 PM
Matthew Russotto
external usenet poster
 
Posts: n/a
Default Haynes manual instructions

In article >,
Arif Khokar > wrote:
>Neil Nelson wrote:
>
>> I've tried latex gloves, usually within 10 minutes, there is
>> sweat pouring out of them...

>
>That hasn't been my experience even being in the operating room for over
>3 hours.


People are different. And operating rooms are usually cold, whereas
shops are more on the warm side.
Ads
  #2  
Old December 8th 04, 07:00 PM
ray
external usenet poster
 
Posts: n/a
Default

Matthew Russotto wrote:
> In article >,
> Arif Khokar > wrote:
>
>>Neil Nelson wrote:
>>
>>
>>>I've tried latex gloves, usually within 10 minutes, there is
>>>sweat pouring out of them...

>>
>>That hasn't been my experience even being in the operating room for over
>>3 hours.

>
>
> People are different. And operating rooms are usually cold, whereas
> shops are more on the warm side.


Also I think there's a lot less cussing and sweating in an operating
room. Most organs are soft and squishy and cut pretty easily compared
to rusted shock bolts...
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Haynes manual instructions Yvan Driving 190 December 21st 04 04:48 PM
Haynes manual instructions Daniel J. Stern Chrysler 252 December 21st 04 04:48 PM


All times are GMT +1. The time now is 09:59 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.