Another exhaust question

I'm going to replace the exhaust pipe between the header and the cat.
converter. Are there two bolts or two studs at the 'clamp' between the
header and pipe? I looking to find out if I can cut them to remove the
pipe, if there are bolts.

tia,

--
Mel

96 Cherokee

Mel P. did pass the time by typing:
> I'm going to replace the exhaust pipe between the header and the cat.
> converter. Are there two bolts or two studs at the 'clamp' between the
> header and pipe? I looking to find out if I can cut them to remove the
> pipe, if there are bolts.

They are bolts. If you cut them you will need replacements. Usually
those come with the downpipe. You will also need the lead? seal that goes
in there.

On my 93ZJ it just took an extension on the socket set and a crecent wrench
to loosen them.

--
DougW

There are two per flange

--
(Remove the SPAM)
2002 WJ Brilliant Black Crystal Pearl Coat
Helping is why we are all here on RAMJ+W, or should be.
..
"Mel P." > wrote in message
...
> I'm going to replace the exhaust pipe between the header and the cat.
> converter. Are there two bolts or two studs at the 'clamp' between the
> header and pipe? I looking to find out if I can cut them to remove the
> pipe, if there are bolts.
>
> tia,
>
> --
> Mel
>
> 96 Cherokee
>
>