If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1990 honda civic dx brake problem
my brake always stick on me after traveling a short distance. I' ve been
trying to fix I blade it but still stick on me. what should I do? please help |
Ads |
#2
|
|||
|
|||
budz wrote: > > my brake always stick on me after traveling a short distance. I' ve been > trying to fix I blade it but still stick on me. what should I do? please > help Perhaps you can describe the problem in a little more detail. Are you talking about the parking brake or the regular brakes? Front, rear or both? What exactly is sticking? Do they ever become unstuck? Oh, and don't expect an answer in 20 minutes, no need to repost your question. |
#3
|
|||
|
|||
I think you need to purge the whole brake system, change the whole fluid!..
Is the fluid dark?...When was the last time you purged your brakes?... As a do it yourself thing (one man bleeder job) I'll suggest you to do the next: Buy one of those "speed bleeders" http://www.speedbleeder.com/ and even if you don't find the right size for your calipers it won't matter. Attach a a nice piece of clear tubbing (like the ones used for aquarium pumps) on to the threaded part (bottom), be shure to attach or clamp it w/a piece of wire, so when you step on your brakes while bleeding, your tubbing won't get popped out of the "speed bleeder". Then the other end of the clear tubbing gets attached to the bleeder screw that you have on your caliper, and be shure to attach it well with a wire too!.. The "speed bleeder" has a little ball inside that allows you to pump the old fluid out, and doesn't allows the air to get back into your brake system. This is better than any other device you could buy at any place to purge or bleed your brakes!... Just be shure not to leave your brake fluid reservoir with out brake fluid or you'll end buying a new brake master cylinder... "budz" > wrote in message lkaboutautos.com... > my brake always stick on me after traveling a short distance. I' ve been > trying to fix I blade it but still stick on me. what should I do? please > help > > |
#4
|
|||
|
|||
> Buy one of those "speed bleeders" http://www.speedbleeder.com/ and even if
> you don't find the right size for your calipers it won't matter. > I keep meaning to get a set of these. Do they work exactly as advertised? You're right about not having too many listed applications but I've emailed with the guy and he's very agreeable to receiving stock bleed screws which he will match accordingly and return. I plan on getting a pair (one front, one rear) to send away next time I get some mail order parts. Unless somebody already knows the right one for 7th gen. 2002 Si/Sir. |
#5
|
|||
|
|||
"MAT" > wrote > > Buy one of those "speed bleeders" http://www.speedbleeder.com/ and even if > > you don't find the right size for your calipers it won't matter. > > > > > I keep meaning to get a set of these. Do they work exactly as advertised? > You're right about not having too many listed applications but I've emailed > with the guy and he's very agreeable to receiving stock bleed screws which > he will match accordingly and return. I plan on getting a pair (one front, > one rear) to send away next time I get some mail order parts. Unless > somebody already knows the right one for 7th gen. 2002 Si/Sir. IIRC this past summer Pep Boys had speed bleeder valves that would have worked on my 1991 Civic. I didn't buy a set, after all, but instead bought a MityVac kit. More importantly, if your brakes are sticking, for starters, I'd be looking at the brake piston/cylinder having rust on them. If you can change brake pads, then rebuilding the brakes is not too difficult. |
#6
|
|||
|
|||
i just had a similar problem with my '93. my left front wheel was
getting real hot. replaced the caliper but the problem remained but not as bad. replaced the flex hose yesterday and will find out today if that fixed it. On Mon, 04 Oct 2004 20:39:22 GMT, "Caroline" > wrote: > >"MAT" > wrote >> > Buy one of those "speed bleeders" http://www.speedbleeder.com/ and even if >> > you don't find the right size for your calipers it won't matter. >> > >> >> >> I keep meaning to get a set of these. Do they work exactly as advertised? >> You're right about not having too many listed applications but I've emailed >> with the guy and he's very agreeable to receiving stock bleed screws which >> he will match accordingly and return. I plan on getting a pair (one front, >> one rear) to send away next time I get some mail order parts. Unless >> somebody already knows the right one for 7th gen. 2002 Si/Sir. > >IIRC this past summer Pep Boys had speed bleeder valves that would have worked >on my 1991 Civic. > >I didn't buy a set, after all, but instead bought a MityVac kit. > >More importantly, if your brakes are sticking, for starters, I'd be looking at >the brake piston/cylinder having rust on them. > >If you can change brake pads, then rebuilding the brakes is not too difficult. > > |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New *FREE* Corvette Discussion Forum | JLA ENTERPRISES TECHNOLOGIES INTEGRATION | Corvette | 12 | November 30th 04 06:36 PM |
1993 honda civic | rockinrobin | Honda | 6 | October 3rd 04 06:48 PM |
1990 Ramcharger Fuel problem? | pennym | Dodge | 0 | August 30th 04 12:20 AM |