If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Skid Plate Protection Needed on Passenger Cars
On Sun, 28 Aug 2005 21:40:03 +0200 (CEST), Nomen Nescio
> wrote: >Low slung cars are excellent on smooth roads, but are susceptable to damage >to their under carriages under certain conditions occassionally >encountered. > >Particularly, when there is a small radius dip, driveway, holes in the >road, on unimproved roads and in the dark when road obstacles cannot be >seen. If the clearance is not enough, the oil pan, frame members, steering >linkages, or rear axle can be damaged. This damage is expensive and or >creates safety problems from the damage inflicted. > >Chrysler must address this problem by shielding the underside of the car in >all critical areas. Usually, it requires a curved steel plate that will >ride up and over these common road obstructions. The plate does not need >to be so heavy as to prevent damage to itself; it can sacrifice itself in a >hard impact to protect vital components under the car. > >Bash plates or skid plates are easily designed, fabricated and fitted. You >should see these items on next year's models. If they are not adopted in >this timely manner, I see liability exposure to the car maker to road >clearance damages which occur in the future, given prior knowledge of the >problem and its cure. Off road vehicles already have them - and generally on standard passenger cars they would be needless extra weight and would contribute to engine overheating if the rest of the design was not changed to take the sheilds into account. All cars sold in North America MUST have a minimum ground clearance. If that is not adequate, the LAW should be changed making more clearance mandatory. Right !!!. That will never happen. Ever hear of driving to suit conditions??? |
Ads |
#2
|
|||
|
|||
Nomen Nescio wrote:
> Low slung cars are excellent on smooth roads, but are susceptable to damage > to their under carriages under certain conditions occassionally > encountered. > > Particularly, when there is a small radius dip, driveway, holes in the > road, on unimproved roads and in the dark when road obstacles cannot be > seen. If the clearance is not enough, the oil pan, frame members, steering > linkages, or rear axle can be damaged. This damage is expensive and or > creates safety problems from the damage inflicted. > > Chrysler must address this problem by shielding the underside of the car in > all critical areas. Usually, it requires a curved steel plate that will > ride up and over these common road obstructions. The plate does not need > to be so heavy as to prevent damage to itself; it can sacrifice itself in a > hard impact to protect vital components under the car. > > Bash plates or skid plates are easily designed, fabricated and fitted. You > should see these items on next year's models. If they are not adopted in > this timely manner, I see liability exposure to the car maker to road > clearance damages which occur in the future, given prior knowledge of the > problem and its cure. > That would be fine if we are willing to sacrifice performance and fuel milage and generally increased repair bills for the additional labor to remove and re-install the shields for the simplest undercarriage maintenance. Compare the total initial cost of the shield on millions of cars to the total cost of avoided damage to a very small percentage of the vehicles, and I think you'll come up with a huge net expense to the buying public (even before factoring in extra fuel cost and general maintenance cost increases of having to deal with a freakin' shield before any work can be done). Costs for routine maintenance and the simplest of repairs is ridiculous enough as it is. Bill Putney (To reply by e-mail, replace the last letter of the alphabet in my address with the letter 'x') |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NTSB Wants Black Boxes in Passenger Vehicles | MoPar Man | Chrysler | 62 | January 14th 05 02:44 PM |
HEMI's HOT | Luke Smith | Driving | 208 | December 19th 04 05:27 PM |
Help needed identifying cars from photos taken early 1900's | Tony Moore | Antique cars | 1 | August 16th 04 04:07 AM |
Pictures/Footage on Classic cars NEEDED for car show!!! | DBurch7672 | Antique cars | 2 | May 7th 04 11:03 PM |
Classic Cars Needed For Oldies Show 8/16 Long Beach! | Thomas Haney | Antique cars | 0 | August 12th 03 05:03 PM |