If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
new build, ford 302 , cam frozen
built 347 stroker
Installed all moving parts, rotated engine.fine AFTER THREE REVS, CAM LOCKED DOWN this is second time--two cams and two sets of cam bearings had to use a slide hammer to remove both cams anyone help? |
Ads |
#2
|
|||
|
|||
new build, ford 302 , cam frozen
|
#3
|
|||
|
|||
new build, ford 302 , cam frozen
On Tuesday, March 20, 2018 at 11:36:52 AM UTC-5, wrote:
> built 347 stroker > Installed all moving parts, rotated engine.fine > AFTER THREE REVS, CAM LOCKED DOWN > > this is second time--two cams and two sets of cam bearings > had to use a slide hammer to remove both cams > > anyone help? Thanks Steve, Rockers are not on yet, bearings are aligned using assembly lube. rotated easily for maybe one revolution by hand and the cam froze in the bushings--take off retaining thrust plate and cam is still frozen. second time to remove cam with sliding hammer. Jan |
#4
|
|||
|
|||
new build, ford 302 , cam frozen
|
#5
|
|||
|
|||
new build, ford 302 , cam frozen
|
#6
|
|||
|
|||
new build, ford 302 , cam frozen
On Tuesday, March 20, 2018 at 11:36:52 AM UTC-5, wrote:
> built 347 stroker > Installed all moving parts, rotated engine.fine > AFTER THREE REVS, CAM LOCKED DOWN > > this is second time--two cams and two sets of cam bearings > had to use a slide hammer to remove both cams > > anyone help? I have had to scrape in cam bearings at least once that I know of. |
#7
|
|||
|
|||
new build, ford 302 , cam frozen
On Tuesday, March 20, 2018 at 11:36:52 AM UTC-5, wrote:
> built 347 stroker > Installed all moving parts, rotated engine.fine > AFTER THREE REVS, CAM LOCKED DOWN > > this is second time--two cams and two sets of cam bearings > had to use a slide hammer to remove both cams > > anyone help? thanks guys, same cam--now have a new one. block assembly is new re-manufactured .. taking to a hot rod builder for him to check into it. |
#8
|
|||
|
|||
new build, ford 302 , cam frozen
> wrote:
>On Tuesday, March 20, 2018 at 11:36:52 AM UTC-5, wrote: >> built 347 stroker >> Installed all moving parts, rotated engine.fine >> AFTER THREE REVS, CAM LOCKED DOWN >> >> this is second time--two cams and two sets of cam bearings >> had to use a slide hammer to remove both cams >> >> anyone help? > >thanks guys, same cam--now have a new one. block assembly is new re-manufactured .. taking to a hot rod builder for him to check into it. Get the calipers first! --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
When Is Ford Going To Build... | NoOp[_2_] | Ford Mustang | 8 | June 2nd 11 04:29 AM |
Hey Ford build this | Nick Naim | Driving | 7 | January 23rd 10 09:52 PM |
Repost for new a.b.p.a. members: 1923 Ford Model T Touring Car Highland Park Plant Build Process Exhibit rvl (H Ford Museum) CK 1.jpg 431783 bytes | HEMI-Powered @ [email protected] | Auto Photos | 0 | March 6th 07 01:12 PM |
Repost for new a.b.p.a. members: 1923 Ford Model T Touring Car Highland Park Plant Build Process Exhibit fvr (H Ford Museum) CK 1.jpg 409327 bytes | HEMI-Powered @ [email protected] | Auto Photos | 0 | March 6th 07 01:11 PM |
Repost for new a.b.p.a. members: 1923 Ford Model T Touring Car Highland Park Plant Build Process Exhibit fvl (H Ford Museum) CK 2.jpg 426456 bytes | HEMI-Powered @ [email protected] | Auto Photos | 0 | March 6th 07 01:11 PM |