If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Is the Chrysler 3.5 engine any good?
replying to kokomoNOSPAMkid, michael wrote:
i have a 2006 pasifica it had 104.00.00 when we got it that was a little over a year ago it now has 145.000 and i started to see oil in my coolant just a little so as time went by i thought oil cooler was going out but it was good so then i thought head gasket geeting ready to go and it did did the work myself resurfaceed heads my self put it back together and crossed my fingers and it was like a new engine i was going to give it a week before i get excited and in about 5 days the head gaskets blew again so i took off the heads again and im going to have them presure cheak and resurfaced im hopeing that there is a crack in one of the heads because that would explain why it blew again but if no cracks or leaks then im wondering if the new gaskets were any good ive done about 10 head gaskets replacments and ive never seen 3 layer gaskets seperated like this were i didnt want to use them but 1 or 2 pepole told me that how they are new idkn the other thing was i didnt retorqe the head bolts after starting the engine with the new gasket after cooling down but the one side bolts were not as tight as they were when i t torqed them down would that make the gasket fail i dont know im going to loss it if it fails a third time any one can help me ???????? -- for full context, visit http://www.motorsforum.com/chrysler/...ood-15458-.htm |
Ads |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Is the Chrysler 3.5 engine any good? | KC[_4_] | Chrysler | 9 | June 1st 18 04:18 AM |
Is the Chrysler 3.5 engine any good? | Larry Holcombe | Chrysler | 1 | June 9th 17 07:41 PM |
Is the Chrysler 3.5 engine any good? | andy[_3_] | Chrysler | 0 | March 5th 17 04:18 PM |
Is the Chrysler 3.5 engine any good? | Eddie111 | Chrysler | 0 | November 17th 16 03:22 AM |
Is the Chrysler 3.5 engine any good? | Jeremy Murphy | Chrysler | 0 | May 28th 16 06:18 AM |