If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#51
|
|||
|
|||
They want to turn my rotors
Sparky Spartacus > wrote in
: > Milleron wrote: > > <snip> > >> Thanks for that good advice. I'll just ask the dealer for whatever >> came on the car, then. > > No reason to buy from the dealer unless you want to, you can probably > save some $$$ by buying the OEM pads on the 'Net from someone like San > Leandro Honda, CheapHondaParts, HandA, etc. (people have noted good > sites from time to time) Whole pile of them here. http://www.tegger.com/hondafaq/online-parts.html > > SLHonda lists the front pad set at $40.50 > > http://slhonda.com/orderparts.jsp > -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Ads |
#52
|
|||
|
|||
They want to turn my rotors
Sparky Spartacus > wrote in
: > Eye Indo wrote: > >> Do not know if this is of any value, but does not some re-surfacing >> remove the glaze on the pads ? > > How would resurfacing (rotors) have anything to do with glaze on the > pads? > > Why would new pads have a glaze in the first place? The newer pads are more prone to glazing than the compounds used earlier. > IIRC that's > something you avoid by breaking in the new pads properly. Pad break-in: http://www.kitcarbooks.com/brakepads.html -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
#53
|
|||
|
|||
They want to turn my rotors
TeGGeR® wrote:
> Sparky Spartacus > wrote in > : > > >>Eye Indo wrote: >> >> >>>Do not know if this is of any value, but does not some re-surfacing >>>remove the glaze on the pads ? >> >>How would resurfacing (rotors) have anything to do with glaze on the >>pads? >> >>Why would new pads have a glaze in the first place? > > The newer pads are more prone to glazing than the compounds used earlier. Okay, but the pads don't come out of the box already glazed. That happens after installation. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
bad turn signal | [email protected] | Technology | 1 | October 3rd 05 03:54 PM |
Brakes squeal!!!! | Dan | Chrysler | 35 | June 7th 05 12:59 AM |
91 LX (5.0), Turn Signals Not Working | sariwa1 | Ford Mustang | 3 | December 17th 04 03:52 AM |