If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
door lock actuator
if you've ever been unable to open drivers door, then you'll know my grief.
when a honda electric door lock actuator fails the only way to get door open is to get the inner panel off, get a drill inside the door cavity and drill out the actuator through the factory pilot hole eventually it will release. the problem is that the part is $350 can. but if you find one at wrecker their around $100 this has happened to me twice in the last 6mos. Does anyone know of any alternatives for next time??? p.s honda charges upto $750 can. to fix this |
Ads |
#2
|
|||
|
|||
"maroonhonda" > wrote in message alkaboutautos.com>...
> if you've ever been unable to open drivers door, then you'll know my grief. > when a honda electric door lock actuator fails the only way to get door > open is to get the inner panel off, get a drill inside the door cavity and > drill out the actuator through the factory pilot hole eventually it will > release. the problem is that the part is $350 can. but if you find one at > wrecker their around $100 > this has happened to me twice in the last 6mos. > Does anyone know of any alternatives for next time??? > p.s honda charges upto $750 can. to fix this buy the new latch from honda. it was a known problem, there is a bulletin on them. if you keep buying used ones you will forever have this problem. Chip |
#3
|
|||
|
|||
"maroonhonda" > wrote in message lkaboutautos.com...
> if you've ever been unable to open drivers door, then you'll know my grief. > when a honda electric door lock actuator fails the only way to get door > open is to get the inner panel off, get a drill inside the door cavity and > drill out the actuator through the factory pilot hole eventually it will > release. the problem is that the part is $350 can. but if you find one at > wrecker their around $100 > this has happened to me twice in the last 6mos. > p.s honda charges upto $750 can. to fix this > Does anyone know of any alternatives for next time??? Yes. Rig a pull cable. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Replacing thermal actuator for 4wd | Brdevore | 4x4 | 4 | January 22nd 04 01:36 AM |