A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto newsgroups » Technology
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Replacing engine mounts 96 Chevy Blazer



 
 
Thread Tools Display Modes
  #1  
Old November 30th 06, 03:47 AM posted to rec.autos.tech
thegremlin
external usenet poster
 
Posts: 1
Default Replacing engine mounts 96 Chevy Blazer

I am trying to lift the engine to replace the engine mounts but I can not
find a lift point in the back of the engine. There is a lift point in the
front just behind the AC compressor but nothing in the rear.

Help Please

Ads
  #2  
Old November 30th 06, 04:38 AM posted to rec.autos.tech
Noozer
external usenet poster
 
Posts: 254
Default Replacing engine mounts 96 Chevy Blazer


"thegremlin" <u29768@uwe> wrote in message news:6a0ac87b97c70@uwe...
>I am trying to lift the engine to replace the engine mounts but I can not
> find a lift point in the back of the engine. There is a lift point in the
> front just behind the AC compressor but nothing in the rear.


Got room to put a 1" think piece of plywood under the oil pan, and use a
hydralic jack?


  #3  
Old December 1st 06, 12:22 AM posted to rec.autos.tech
thegremlin via CarKB.com
external usenet poster
 
Posts: 1
Default Replacing engine mounts 96 Chevy Blazer

I was going to use that as a last resort. I just can not find a lift point on
the one side of the engine. Thanks for the idea.

Noozer wrote:
>>I am trying to lift the engine to replace the engine mounts but I can not
>> find a lift point in the back of the engine. There is a lift point in the
>> front just behind the AC compressor but nothing in the rear.

>
>Got room to put a 1" think piece of plywood under the oil pan, and use a
>hydralic jack?


--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...nance/200612/1

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Recommendations for Jeep Mechanic near Edison, NJ [email protected] Jeep 1 July 30th 06 07:10 PM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 July 10th 05 05:24 AM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 June 24th 05 05:27 AM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 June 8th 05 05:28 AM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 May 24th 05 05:27 AM


All times are GMT +1. The time now is 06:33 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.