94 SC2 power window motor

My passenger side window has stopped working (in the down position)
Before I take the leap and start removing the outer and inner panels.
Has anyone found the console switch to be defective? I didn't have
any previous problems of the window intermittinly stopping or any of
the thunking sounds.

When I push the switch down I hear a click in the door which tells me
that juice is getting there. When I pull up on the switch I hear
nothing.

I've read tons of stuff here about the various problems with these
power windows. Sounds like a crazy problem. Some people's gears
stripped, some people banged on it and it worked, loose bolts, missing
plastic pieces, multiple motors burning out. Sounds like it will be
lots of fun trying to figure this one out.

Had the same problem with my 94SL 2. I can save you a lot of time. You can't
do anything from the inside of the door. Everthing is access from the
outside via taking the door skin off. It was quite easy once you get the
correct torx bit for the large headed bolts.

"raymondj" > wrote in message
om...
> My passenger side window has stopped working (in the down position)
> Before I take the leap and start removing the outer and inner panels.
> Has anyone found the console switch to be defective? I didn't have
> any previous problems of the window intermittinly stopping or any of
> the thunking sounds.
>
> When I push the switch down I hear a click in the door which tells me
> that juice is getting there. When I pull up on the switch I hear
> nothing.
>
> I've read tons of stuff here about the various problems with these
> power windows. Sounds like a crazy problem. Some people's gears
> stripped, some people banged on it and it worked, loose bolts, missing
> plastic pieces, multiple motors burning out. Sounds like it will be
> lots of fun trying to figure this one out.