If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
99 A6 2.8 Crusie Conrol
About 4 months ago, I noticed an intermittant problem with the crusie
control. Some days, it would not engage, some days it would. This lasted about a week or two, and since then, it just won't engage at all. Any ideas what might be wrong and/or where to start looking?. Thanks... ....Mike |
Ads |
#2
|
|||
|
|||
99 A6 2.8 Crusie Conrol
Probably either the switch on the steering column needs contacts cleaned
with CRC or if yours has a vacuum switch above the brake pedal it might be sticking or need adjustment. .. . . /\/\ i k e wrote: > About 4 months ago, I noticed an intermittant problem with the crusie > control. Some days, it would not engage, some days it would. > This lasted about a week or two, and since then, it just won't engage at > all. > > Any ideas what might be wrong and/or where to start looking?. > > > Thanks... > > ...Mike > > > |
#3
|
|||
|
|||
99 A6 2.8 Crusie Conrol
I've found this to be the beginning of the end, sorry to say, and it
is a very difficult problem to diagnose. However, looks like you got some good advice from TonyJ. Just a fair warning, it could be very costly to fix, if it can be fixed at all. I had a control replaced once and it lasted 1 day! LOL |
Thread Tools | |
Display Modes | |
|
|