If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
FFB...almost done
Mario Petrinovic:
Mario Petrinovic: I just discovered another thing. In-game damper must be 50. It was a mistake from iRacing to lock it at 75, in the old days. So, the default should be 100/50/50/50, and in-game damper 50. -------------------------------------------------------------------------------- Actually, it very well can be that Logitech driver should be the default (100/100/100/100), and you have to adjust in-game Damper, to tweak the behaviour of FFB. It looks like Damper in-game na Damper in driver aren't the same thing. Damper is canned, but damper definitively adjsuts the behaviour of FFB, so Damper probably is a tool with which you adjust the behaviour of FFB. I'll explore this tomorrow. -------------------------------------------------------------------------------- Ok, in-game Damper should be 50% (or around 50%). With Damper at 50% you have to adjust in-game Strength as well. This should be 10.0 - 30.0, but probably somewhere around 25.0 on my system (I'll see this tomorrow). It looks like this is "the right" way, : ). |
Ads |
#12
|
|||
|
|||
FFB...almost done
Mario Petrinovic:
Mario Petrinovic: Mario Petrinovic: I just discovered another thing. In-game damper must be 50. It was a mistake from iRacing to lock it at 75, in the old days. So, the default should be 100/50/50/50, and in-game damper 50. -------------------------------------------------------------------------------- Actually, it very well can be that Logitech driver should be the default (100/100/100/100), and you have to adjust in-game Damper, to tweak the behaviour of FFB. It looks like Damper in-game na Damper in driver aren't the same thing. Damper is canned, but damper definitively adjsuts the behaviour of FFB, so Damper probably is a tool with which you adjust the behaviour of FFB. I'll explore this tomorrow. -------------------------------------------------------------------------------- Ok, in-game Damper should be 50% (or around 50%). With Damper at 50% you have to adjust in-game Strength as well. This should be 10.0 - 30.0, but probably somewhere around 25.0 on my system (I'll see this tomorrow). It looks like this is "the right" way, : ). -------------------------------------------------------------------------------- cockpitLookDeadZone should be 0.000000. In-game Damper should be 50%. In-game Stregth should be 20.0. Tomorow I'll see where to put sliders in Logitech driver. |
#13
|
|||
|
|||
FFB...almost done
Mario Petrinovic:
cockpitLookDeadZone should be 0.000000. In-game Damper should be 50%. In-game Stregth should be 20.0. Tomorow I'll see where to put sliders in Logitech driver. -------------------------------------------------------------------------------- Ok, another one done. Centering Spring should be at 50%. Now only to adjust Overall, Damper amd Spring. |
#14
|
|||
|
|||
FFB...almost done
Mario Petrinovic:
Mario Petrinovic: cockpitLookDeadZone should be 0.000000. In-game Damper should be 50%. In-game Stregth should be 20.0. Tomorow I'll see where to put sliders in Logitech driver. -------------------------------------------------------------------------------- Ok, another one done. Centering Spring should be at 50%. Now only to adjust Overall, Damper amd Spring. -------------------------------------------------------------------------------- Oops, wrong. Centering Spring should be 0%. |
#15
|
|||
|
|||
FFB...almost done
Mario Petrinovic:
Mario Petrinovic: Mario Petrinovic: cockpitLookDeadZone should be 0.000000. In-game Damper should be 50%. In-game Stregth should be 20.0. Tomorow I'll see where to put sliders in Logitech driver. -------------------------------------------------------------------------------- Ok, another one done. Centering Spring should be at 50%. Now only to adjust Overall, Damper amd Spring. -------------------------------------------------------------------------------- Oops, wrong. Centering Spring should be 0%. -------------------------------------------------------------------------------- Hm, wrong again. But, at least Centering Spring at 0% is good for determining the Overall, which turned out to be 139%. This value I've got previously as well, when I searched for Overall, so it looks like this is alright. With 100/100/100/- the best Centering Spring was 50%. Now, with 139/100/100/- I am doing just rough search, and it looks like it could be around 60%. I'll see. It does take a long time, since I have to try each percent, one by one, to see what is actually going on. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New PC's FFB | Mario Petrinovic | Simulators | 40 | May 27th 12 10:45 PM |
FFB (new development) | Mario Petrinovic | Simulators | 27 | December 14th 11 08:07 PM |
FFB (so far) | Mario Petrinovic | Simulators | 0 | September 25th 11 10:57 AM |
FFB | Mario Petrinovic | Simulators | 26 | September 5th 11 08:52 AM |
G25 v. ECCI - To FFB or not to FFB | [email protected] | Simulators | 1 | August 17th 07 02:35 PM |