If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Come on lads!!! (and lasses)
GT wrote:
> "Catman" > wrote in message > .. . >> GT wrote: >>> "Jim" > wrote in message >>> ... >>>> I'm missing reading about the Alfa stories/problems.......where have all >>>> the posts gone?? >>>> >>>> Should I be looking elsewhere? Has the action moved on?? >>>> >>>> J >>> Just put a new tyre on the front today (£58 for H instead of £100+ for V) >>> and the exhaust is blowing. Local garage says the flexible part of the >>> exhaust is not an 'orderable' part, so he can use something similar and >>> weld it on to the existing pipes. £258 with labour. I need the flexible >>> part in the middle and the back box part replacing. Front bit + cat seems >>> OK. >>> >>> Anyone got a price comparissons for me? Is the 2.0 JTS exhaust system the >>> same as the TS 2.0 ?? >> That seems massively expensive. Try bodyshopwarehouse.co.uk > > They don't have the 156 listed with the JTS engine - only TSparks. And for > the 2.0 TSpark (which I don't have), they don't seem to have the flexihose > part that has gone on my exhaust. This part seems to be a dealer only > orderable part. Madness. It's a flexible tube FFS! > >> Or F1 > > Not sure which website you mean - the F1 breakers or somewhere else? > > http://www.f1autocentres.co.uk/index.asp -- Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3 Tyger, Tyger Burning Bright (Remove rust to reply) 116 Giulietta 3.0l Sprint 1.7 145 2.0 Cloverleaf 156 V6 2.5 S2 Triumph Sprint ST 1050: It's blue, see. www.cuore-sportivo.co.uk |
Ads |
#12
|
|||
|
|||
Come on lads!!! (and lasses)
"Catman" > wrote in message
. .. > GT wrote: >> "Catman" > wrote in message >> .. . >>> GT wrote: >>>> "Jim" > wrote in message >>>> ... >>>>> I'm missing reading about the Alfa stories/problems.......where have >>>>> all the posts gone?? >>>>> >>>>> Should I be looking elsewhere? Has the action moved on?? >>>>> >>>>> J >>>> Just put a new tyre on the front today (£58 for H instead of £100+ for >>>> V) and the exhaust is blowing. Local garage says the flexible part of >>>> the exhaust is not an 'orderable' part, so he can use something similar >>>> and weld it on to the existing pipes. £258 with labour. I need the >>>> flexible part in the middle and the back box part replacing. Front bit >>>> + cat seems OK. >>>> >>>> Anyone got a price comparissons for me? Is the 2.0 JTS exhaust system >>>> the same as the TS 2.0 ?? >>> That seems massively expensive. Try bodyshopwarehouse.co.uk >> >> They don't have the 156 listed with the JTS engine - only TSparks. And >> for the 2.0 TSpark (which I don't have), they don't seem to have the >> flexihose part that has gone on my exhaust. This part seems to be a >> dealer only orderable part. > > Madness. It's a flexible tube FFS! I know - the local garage can fit a similar part, but it will need to be cut and welded! The alfa garage will charge over £500 for the 'real' part. >>> Or F1 >> >> Not sure which website you mean - the F1 breakers or somewhere else? > http://www.f1autocentres.co.uk/index.asp Ah - it would seem that my nearest dealer is Doncaster - a good 6 hours drive away! |
#13
|
|||
|
|||
Come on lads!!! (and lasses)
GT wrote:
> "Catman" > wrote in message > . .. >> GT wrote: >>> "Catman" > wrote in message >>> .. . >>>> GT wrote: >>>>> "Jim" > wrote in message >>>>> ... >>>>>> I'm missing reading about the Alfa stories/problems.......where have >>>>>> all the posts gone?? >>>>>> >>>>>> Should I be looking elsewhere? Has the action moved on?? >>>>>> >>>>>> J >>>>> Just put a new tyre on the front today (£58 for H instead of £100+ for >>>>> V) and the exhaust is blowing. Local garage says the flexible part of >>>>> the exhaust is not an 'orderable' part, so he can use something similar >>>>> and weld it on to the existing pipes. £258 with labour. I need the >>>>> flexible part in the middle and the back box part replacing. Front bit >>>>> + cat seems OK. >>>>> >>>>> Anyone got a price comparissons for me? Is the 2.0 JTS exhaust system >>>>> the same as the TS 2.0 ?? >>>> That seems massively expensive. Try bodyshopwarehouse.co.uk >>> They don't have the 156 listed with the JTS engine - only TSparks. And >>> for the 2.0 TSpark (which I don't have), they don't seem to have the >>> flexihose part that has gone on my exhaust. This part seems to be a >>> dealer only orderable part. >> Madness. It's a flexible tube FFS! > > I know - the local garage can fit a similar part, but it will need to be cut > and welded! The alfa garage will charge over £500 for the 'real' part. > >>>> Or F1 >>> Not sure which website you mean - the F1 breakers or somewhere else? >> http://www.f1autocentres.co.uk/index.asp > > Ah - it would seem that my nearest dealer is Doncaster - a good 6 hours > drive away! > > Ouch -- Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3 Tyger, Tyger Burning Bright (Remove rust to reply) 116 Giulietta 3.0l Sprint 1.7 145 2.0 Cloverleaf 156 V6 2.5 S2 Triumph Sprint ST 1050: It's blue, see. www.cuore-sportivo.co.uk |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hurrah, well done lads .........but..... | Corkery11 | Chrysler | 2 | January 8th 07 06:53 PM |