If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Got my 06 C6 Vette Dynoed on Sunday
We are going to get the vehicle dynoed after every modification, so
we'll have numbers for comparrison on each mod. First thing we have on the "to buy" list is the SLP intake system for it and a corsa exhaust. After that I'm not sure what else we plan on doing, but I will make sure to get a dyno after each mod. As for the numbers being light, they are IMO. I still don't believe we dynoed the vehicle correctly with it in drive and getting up to 160 MPH, plus it was obviously in too high of a gear since the A/F ratio went low into the rich side of things as the RPM's increased. I know GM has power enrichment, but it shouldn't have been that lean. Big Al, the vehicle isn't a Z06. It is an 06 C6 with an LS2 rated at 400HP at the crank ------------------------------------ Mike Mangione http://www.carforums.net |
Ads |
#12
|
|||
|
|||
Got my 06 C6 Vette Dynoed on Sunday
"xblazinlv" > wrote in message > > Big Al, the vehicle isn't a Z06. It is an 06 C6 with an LS2 rated at > 400HP at the crank > Ooops Sorry, Al |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: 1991 Inaugural "VETTE SET" Factory Box (Factory-Sealed) | J.R. Sinclair | Corvette | 0 | June 11th 05 05:45 AM |
leaf springs | [email protected] | Corvette | 3 | March 10th 05 10:42 PM |
Just bought my first vette!!!!! Questions... | jameson | Corvette | 82 | October 20th 04 07:17 PM |