If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
EMPI electronic ignition kit
Any one here tried one and have any feed back they could offer me on the
subject? These sell for about half the price of the other ignition kits. do they work OK or are they not worth the money? Tony |
Ads |
#2
|
|||
|
|||
EMPI electronic ignition kit
On Mon, 10 Nov 2008 05:42:43 +0100, Anthony W > wrote:
> Any one here tried one and have any feed back they could offer me on the > subject? > > These sell for about half the price of the other ignition kits. do they > work OK or are they not worth the money? > > Tony Could you provide a link? A good setup is Pertronix and a CDI module, John used to sell the Universial industries range, no longer, so your choice is more or less the Mallory box. From what I have read it is better and cheaper than the MSD counterpart. J. -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/ |
#3
|
|||
|
|||
EMPI electronic ignition kit
P.J.Berg wrote:
> On Mon, 10 Nov 2008 05:42:43 +0100, Anthony W > wrote: > >> Any one here tried one and have any feed back they could offer me on >> the subject? >> >> These sell for about half the price of the other ignition kits. do >> they work OK or are they not worth the money? >> >> Tony > > Could you provide a link? > > A good setup is Pertronix and a CDI module, John used to sell the > Universial industries range, no longer, so your choice is more or less > the Mallory box. From what I have read it is better and cheaper than the > MSD counterpart. > > J. Sorry, no links. The local VW parts specialist has them. These are not a CDI system, only a points replacement. Right now that's good enough for me as I can't afford a Pertronix and a MSD box... Tony |
#4
|
|||
|
|||
EMPI electronic ignition kit
On Mon, 10 Nov 2008 08:14:51 +0100, Anthony W > wrote:
> P.J.Berg wrote: >> On Mon, 10 Nov 2008 05:42:43 +0100, Anthony W > >> wrote: >> >>> Any one here tried one and have any feed back they could offer me on >>> the subject? >>> >>> These sell for about half the price of the other ignition kits. do >>> they work OK or are they not worth the money? >>> >>> Tony >> Could you provide a link? >> A good setup is Pertronix and a CDI module, John used to sell the >> Universial industries range, no longer, so your choice is more or less >> the Mallory box. From what I have read it is better and cheaper than >> the MSD counterpart. >> J. > > Sorry, no links. The local VW parts specialist has them. These are not > a CDI system, only a points replacement. Right now that's good enough > for me as I can't afford a Pertronix and a MSD box... > > Tony Point replacement is fine, you can add a CDI box later, just remember to buy a Mallory box and not MSD as the latter have a higher failure ratio. I did a quick search, is it this one?: http://www.vwparts.net/MB9432.html If so, it is a Compufire copy/clone/re-brand. The only drawback with this design is the plastic dish holding the magnets and also quality of the leads from what I have been told. It does however do the exact same thing as a Pertronix module. You can see the Pertronix design he http://www.vwparts.net/PER1847.html Here is a Pertronix clone offered att the same price as the Empi kit: http://www.hot-spark.com/ (Scroll down, read details). I have no experience with the latter, make a new post with a query here, as I know others have used them. J. -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/ |
#5
|
|||
|
|||
EMPI electronic ignition kit
P.J.Berg wrote:
> On Mon, 10 Nov 2008 08:14:51 +0100, Anthony W > wrote: > >> P.J.Berg wrote: >>> On Mon, 10 Nov 2008 05:42:43 +0100, Anthony W > >>> wrote: >>> >>>> Any one here tried one and have any feed back they could offer me on >>>> the subject? >>>> >>>> These sell for about half the price of the other ignition kits. do >>>> they work OK or are they not worth the money? >>>> >>>> Tony >>> Could you provide a link? >>> A good setup is Pertronix and a CDI module, John used to sell the >>> Universial industries range, no longer, so your choice is more or >>> less the Mallory box. From what I have read it is better and cheaper >>> than the MSD counterpart. >>> J. >> >> Sorry, no links. The local VW parts specialist has them. These are >> not a CDI system, only a points replacement. Right now that's good >> enough for me as I can't afford a Pertronix and a MSD box... >> >> Tony > > Point replacement is fine, you can add a CDI box later, just remember to > buy a Mallory box and not MSD as the latter have a higher failure ratio. > > I did a quick search, is it this one?: > http://www.vwparts.net/MB9432.html > > If so, it is a Compufire copy/clone/re-brand. The only drawback with > this design is the plastic dish holding the magnets and also quality of > the leads from what I have been told. It does however do the exact same > thing as a Pertronix module. > > You can see the Pertronix design he > http://www.vwparts.net/PER1847.html > > Here is a Pertronix clone offered att the same price as the Empi kit: > http://www.hot-spark.com/ (Scroll down, read details). > > I have no experience with the latter, make a new post with a query here, > as I know others have used them. > > J. > > Go with the Pertronix. Jan |
#6
|
|||
|
|||
EMPI electronic ignition kit
On Nov 10, 3:48�am, Jan Andersson >
wrote: > P.J.Berg wrote: > > On Mon, 10 Nov 2008 08:14:51 +0100, Anthony W > wrote: > > >> P.J.Berg wrote: > >>> On Mon, 10 Nov 2008 05:42:43 +0100, Anthony W > > >>> wrote: > > >>>> Any one here tried one and have any feed back they could offer me on > >>>> the subject? > > >>>> These sell for about half the price of the other ignition kits. �do > >>>> they work OK or are they not worth the money? > > >>>> Tony > >>> �Could you provide a link? > >>> �A good setup is Pertronix and a CDI module, John used to sell the > >>> Universial industries range, no longer, so your choice is more or > >>> less the Mallory box. From what I have read it is better and cheaper > >>> than the MSD counterpart. > >>> �J. > > >> Sorry, no links. �The local VW parts specialist has them. �These are > >> not a CDI system, only a points replacement. �Right now that's good > >> enough for me as I can't afford a Pertronix and a MSD box... > > >> Tony > > > Point replacement is fine, you can add a CDI box later, just remember to > > buy a Mallory box and not MSD as the latter have a higher failure ratio.. > > > I did a quick search, is it this one?: > >http://www.vwparts.net/MB9432.html > > > If so, it is a Compufire copy/clone/re-brand. The only drawback with > > this design is the plastic dish holding the magnets and also quality of > > the leads from what I have been told. It does however do the exact same > > thing as a Pertronix module. > > > You can see the Pertronix design he > >http://www.vwparts.net/PER1847.html > > > Here is a Pertronix clone offered att the same price as the Empi kit: > >http://www.hot-spark.com/�(Scroll down, read details). > > > I have no experience with the latter, make a new post with a query here, > > as I know others have used them. > > > J. > > Go with the Pertronix. > > Jan- Hide quoted text - > > - Show quoted text - I have used both , I have installed the empi distributor w / pertonix ignition in a 68 bus with new engine everything is fine even after a year. I leave a set of points and condensor in the car just in case, you never know about these new fanguled gadgets. I think the cost works out the same |
#7
|
|||
|
|||
EMPI electronic ignition kit
"Anthony W" > wrote in message ... > Sorry, no links. The local VW parts specialist has them. These are not a > CDI system, only a points replacement. Right now that's good enough for > me as I can't afford a Pertronix and a MSD box... > > Tony Tony, the Empi part is a clone, and from the little i've read about it, it's not the best, but not the worst... the pertronix clone "hotspark" gets very poor reviews. you can read about the multiple failures on thesamba. The entire points replacement is a debate that continues every time it is brought up.... I've had no issues with any pertronix i've ever installed and the one i have currently has been in use since i bought it(first one i ever bought) in the early to mid 90's...(it is currently installed in a locked out 009 in my little turbo engine.) |
#8
|
|||
|
|||
EMPI electronic ignition kit
What about this Jacobs’ Ignition Kit?
http://www.jcwhitney.com/JACOBS-FC-1...29_10101.jc w ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ On Nov 9, 11:35*pm, "P.J.Berg" > wrote: > On Mon, 10 Nov 2008 05:42:43 +0100, Anthony W > wrote: > > Any one here tried one and have any feed back they could offer me on the * > > subject? > > > These sell for about half the price of the other ignition kits. *do they * > > work OK or are they not worth the money? > > > Tony > > Could you provide a link? > > A good setup is Pertronix and a CDI module, John used to sell the * > Universial industries range, no longer, so your choice is more or less the * > Mallory box. From what I have read it is better and cheaper than the MSD * > counterpart. > > J. > > -- > Using Opera's revolutionary e-mail client:http://www.opera.com/mail/ |
#9
|
|||
|
|||
EMPI electronic ignition kit
On Nov 9, 8:42 pm, Anthony W > wrote:
> Any one here tried one and have any feed back they could offer me on the > subject? > > These sell for about half the price of the other ignition kits. do they > work OK or are they not worth the money? > > Tony Save your money, buy Pertronix or Compufire. EMPI makes some of the worst-quality crap on the planet. Remember Every Mistake Passes Inspection (EMPI). |
#10
|
|||
|
|||
EMPI electronic ignition kit
"Anthony W" > wrote in message ... > Any one here tried one and have any feed back they could offer me on the > subject? > > These sell for about half the price of the other ignition kits. do they > work OK or are they not worth the money? > > Tony I have well over 17,000 miles on a Pertronix pickup and Flame Thrower coil with a SVA distributor. Not a hiccups yet. Michael |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
electronic ignition | Dennis[_4_] | VW air cooled | 10 | June 8th 07 09:28 PM |
(again) electronic ignition | Bart Bervoets | VW air cooled | 3 | November 3rd 05 01:56 PM |
Electronic ignition? | James FRITZ Friedel | Ford Mustang | 7 | June 2nd 05 02:08 AM |
electronic ignition help... | Nate Nagel | Chrysler | 19 | May 22nd 05 09:54 AM |
an electronic ignition > | 0_Qed | Technology | 2 | May 16th 05 12:16 PM |