If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
honda quality parts advice
from these parts what do you recommend as higher quality part or maybe what
to stay away from maybe something not listed ? Front/Rear Rotors :: Honda, Brembo, Winhere, PBR, Mountain Brake pads :: Honda, Nisin Prem, Akebono, Nisin Silver, PBR, NPN, Bendix HO2S :: Honda, NTK, Denso, Bosch, Walker TIA robb |
Ads |
#2
|
|||
|
|||
honda quality parts advice
Rob B wrote:
> from these parts what do you recommend as higher quality part or maybe what > to stay away from maybe something not listed ? > > Front/Rear Rotors :: Honda, > Brake pads :: Honda, Nisin Prem, Akebono, Nisin Silver, Bendix, id toss in raybestos too. to be honest, though. ive had good luck on all other cars with whatever the "lifetime" brake pad is. save the receipt, get new pads for as long as you own the car. > > HO2S :: Honda, NTK, Denso, Bosch, Walker honda only. mine was $220 at the dealer, but was plug and play. no stripping/crimping wires. |
#3
|
|||
|
|||
honda quality parts advice
"SoCalMike" > wrote in message ... > Rob B wrote: > > from these parts what do you recommend as higher quality part or maybe what > > to stay away from maybe something not listed ? > > > > Front/Rear Rotors :: Honda, > > > Brake pads :: Honda, Nisin Prem, Akebono, Nisin Silver, Bendix, > > id toss in raybestos too. to be honest, though. ive had good luck on all > other cars with whatever the "lifetime" brake pad is. save the receipt, > get new pads for as long as you own the car. > never heard of lifetime brake pad, i'll look into that > > > > HO2S :: Honda, NTK, Denso, Bosch, Walker > > honda only. mine was $220 at the dealer, but was plug and play. no > stripping/crimping wires. high thanks for response my dealer wants 274 which is close to price so my worst price for (front rotors, pads, h02s} is 485 the best is 128 which is reason for post... 350 is alot of quality wiggle room ? i do not mind paying for quality, i do not want to overpay on the "probably ok" stuff thanks again robb |
#4
|
|||
|
|||
does Brembo make good rotors ?
c'mon yuse guys, need some experience with these parts (crap/not crap)
from these parts what do you recommend as higher quality part or maybe what to stay away from or maybe something not listed ? Front/Rear Rotors :: Honda, Brembo, Winhere, PBR, Mountain Brake pads :: Honda, Nisin Prem, Akebono, Nisin Silver, PBR, NPN, Bendix HO2S :: Honda, NTK, Denso, Bosch, Walker TIA robb |
#5
|
|||
|
|||
does Brembo make good rotors ?
"Rob B" > wrote
> c'mon yuse guys, need some experience with these parts (crap/not crap) > > from these parts what do you recommend as higher quality part or maybe what > to stay away from or maybe something not listed ? > > Front/Rear Rotors :: Honda, Brembo, Winhere, PBR, Mountain Dunno. > Brake pads :: Honda, Nisin Prem, Akebono, Nisin Silver, PBR, NPN, Bendix In the future I plan to go with strictly Honda OEM. From my reading, the "lifetime" pads use material that is harder and so lasts longer, but also as a result shortens the life of the rotor. The cost of Honda OEM pads (around $40 online for my 91 Civic) is low enough that I think they're worth it. > HO2S :: Honda, NTK, Denso, Bosch, Walker = heated oxygen sensor (1) From my reading the aftermarket O2 sensors can be persnickety; and (2) an OEM sensor might be had for a very competitive price at https://www.automedicsupply.com/ . At least, for my 91 Civic, it was a steal at about $45 altogether. Very good service and shipping. |
#6
|
|||
|
|||
does Brembo make good rotors ?
"Elle" > wrote
Rob > > HO2S :: Honda, NTK, Denso, Bosch, Walker > > = heated oxygen sensor P.S. my 91 Civic's OEM sensor is made by Nippon Denso, now called IIRC just Denso. |
#7
|
|||
|
|||
does Brembo make good rotors ?
On Thu, 19 Jan 2006 19:30:36 GMT, "Rob B" > wrote:
>c'mon yuse guys, need some experience with these parts (crap/not crap) > >from these parts what do you recommend as higher quality part or maybe what >to stay away from or maybe something not listed ? > >Front/Rear Rotors :: Honda, Brembo, Winhere, PBR, Mountain >Brake pads :: Honda, Nisin Prem, Akebono, Nisin Silver, PBR, NPN, Bendix >HO2S :: Honda, NTK, Denso, Bosch, Walker > >TIA >robb > I just put Akebono Ceramics on my '97 accord. Only a few thousand miles on them but they are quiet, low dusting and I was impressed with the quality of the pads and adhesive shims out of the box. Time will tell. Frank |
#8
|
|||
|
|||
does Brembo make good rotors ?
"Elle" > wrote in
ink.net: > "Elle" > wrote > Rob >> > HO2S :: Honda, NTK, Denso, Bosch, Walker >> >> = heated oxygen sensor > > > P.S. my 91 Civic's OEM sensor is made by Nippon Denso, now > called IIRC just Denso. > > > Just ND, actually. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
#9
|
|||
|
|||
honda quality parts advice
for my accord i went with bremo rotors with slots, drilled holes and carbon metallic brand brake pads and i am soooooooo happy just be gentle the first 200 miles let them breakin correctly Rob B wrote: > from these parts what do you recommend as higher quality part or maybe what > to stay away from maybe something not listed ? > > Front/Rear Rotors :: Honda, Brembo, Winhere, PBR, Mountain > > Brake pads :: Honda, Nisin Prem, Akebono, Nisin Silver, PBR, NPN, Bendix > > HO2S :: Honda, NTK, Denso, Bosch, Walker > > > TIA > robb |
#10
|
|||
|
|||
does Brembo make good rotors ?
"TeGGeR®" > wrote
> "Elle" > wrote > > P.S. my 91 Civic's OEM sensor is made by Nippon Denso, now > > called IIRC just Denso. > Just ND, actually. Actually, the site I posted before lists the manufacturer as just "Denso." The packaging for my 91 Civic's sensor says just "Denso" on it. The history of Denso Corp. states that NipponDenso Co. became Denso Corp. in 1996: http://www.denso.co.jp/en/aboutdenso/history/ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: 97 Honda Prelude Body Parts | Mr_G_reddy5 | Honda | 0 | December 28th 05 04:21 PM |
Real parts stores vs. discount chains - quality of service | larry moe 'n curly | Technology | 3 | June 4th 05 09:13 PM |
What's the best source for good prices on Honda parts? | Gordon McGrew | Honda | 0 | February 19th 05 11:20 PM |
Honda OEM Parts Catalogs for Sale | Joe | Honda | 0 | February 12th 05 01:43 PM |
Need advice for purchasing new Honda | Adrian | Honda | 27 | January 1st 05 03:49 PM |