If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
74 Cutlass with starting problem
I drive as my primary car a 1974 Olds Cutlass. I am only the second
owner and it has 66,000 miles on it. It had less than 40,000 on it when I got it a few years ago. It is the envy of many young people in my town! Anyway, it has developed an intermittent starting problem. About 5 times now over 3 months it has failed to start. When I turn the key, the dash lights up and I am obviously getting power from the battery. (The battery is new.) But nothing else happens. Not even a click from the starter. After some time passes, between 5 minutes and a couple of hours, it will start again. The only thing I've noticed in common with the situations in which it won't start is that it has always been driven within 1-3 hours. It always starts in the morning or when it has sat longer. I don't think it is weather related, as our summer (southeast US) has been inordinately cool. Two different mechanics have looked at it and tried to get it to fail, and of course it won't. I've been told it could be anything between the ignition, wiring, and starter, and both are reluctant to do investigatory work. It currently does appear to have a wiring problem; when I turn on the headlights, the arrow in the dashboard for the left turn signal lights up and stays lit, and the turn signal doesn't work. It isn't the bulb. It is only because of this problem that the second mechanic has agreed to look at the situation, in case the problems are related. I may be at the point where I have to pay for them to start switching out parts. I don't have complete records on the car's history. My question is, what is statistically the most likely part in this area to have failed on this 30 year old car? Thanks for any tips, Amanda |
Ads |
#2
|
|||
|
|||
In rec.autos.tech Amanda Robin > wrote:
> I drive as my primary car a 1974 Olds Cutlass. I am only the second [snip] > Anyway, it has developed an intermittent starting problem. About 5 [snip] > I may be at the point where I have to pay for them to start switching > out parts. I don't have complete records on the car's history. My > question is, what is statistically the most likely part in this area to > have failed on this 30 year old car? Knowing the statistically most likely electrical part or subsystem to fail on your car might be an interesting factoid to know, but it's nearly useless when it comes to fixing your *particular* problem. You appear to be assuming that replacing parts by picking them from a list of statistically likely failures is a reasonable way for a professional mechanic[1] to diagnose an electrical problem. It isn't. What a good mechanic will do is take careful notes of your description of the symptoms and the circumstances under which they occur. Then he will test and inspect various systems on your car. Only after he has narrowed down his diagnosis to a near certainty, will he will he replace a part. Certainly there are exceptions to this scenario, but for the most part, it is best practice to identify the fault, and the cause of the fault, before simply replacing a bad part, even if you know for sure that the part is defective. This is so you don't end up replacing that part multiple times, because you haven't fixed the root cause that made the part fail in the first place. [1] It's not a good way for an amateur to diagnose electrical problems either, but unfortunately there are far too many people attempting to fix electrical system problems with only the sketchiest understanding of even the basics of electrical theory. The same goes for mechanical systems, too, but it seems to show up more clearly when it comes to electrics and electronics. |
#3
|
|||
|
|||
Amanda,
Years ago we had a motorhome that was made out of a Chevyvan 30. Although I am somewhat vague on the exact function of it, there was an ignition wire which travelled through a metal tube from the top to the bottom of the engine. It broke and so my dad replaced it - it was X inches long, so the wire my dad spliced in was X+2 inches long. I took the vehicle for the weekend and about 10 minutes from home it began to shudder, hesitate, then stall. After about 20 minutes it fired right back up again, but then repeated the drama after another 8 minutes or so. It turned out that, when heated, the wire managed to come into contact with the exhaust manifold and shorted out the ignition. I'd be looking at anything that gets exposed to the heat - not just the starter and solenoid, but follow the wiring back to the firewall. Unfortunately, gremlins like this are hard to pinpoint unless they are discovered when they are manifesting themselves. Check the wiring for broken connections or cross-connections within the wiring harness in the engine bay. I'd say take the car out and get the engine bay up to temp - maybe after a 1/2 hour drive or so. End the trip on the ramps (or garage bay) leave the car off for a while - to let the heat soak in because there's no air flowing through the engine compartment and the fan's off - leave the hood down too. Try to revive the gremlin after that. You can check/clean the connections to the starter/solenoid - or even just replace the starter with a used one: www.car-part.com (usual disclaimers: no $ affiliation, blah blah) shows starters for a '74 Cutlass in the southeast US to be as low as $15 - buy one of those, and if it makes the gremlin go away, you've found the problem....if not, well, add it to the spare part bin. For the turn signal problem - check out the turn signal/taillight housings - there's probably a cross-connection between the parking lights and the turn signal (probably from corrosion in one of the housings) Cheers! Steve Sears 1987 Audi 5kTQ - shoed with car-part.com rims 1980 Audi 5k - watching car-part.com for a windshield (that I can drive to get) 1962 and '64 Auto Union DKW Junior deLuxes - car-part.com is of little help - ebay.de on the other hand..... (SPAM Blocker NOTE: Remove SHOES to reply) "Amanda Robin" > wrote in message ... > I drive as my primary car a 1974 Olds Cutlass. I am only the second > owner and it has 66,000 miles on it. It had less than 40,000 on it when > I got it a few years ago. It is the envy of many young people in my > town! > > Anyway, it has developed an intermittent starting problem. About 5 > times now over 3 months it has failed to start. When I turn the key, > the dash lights up and I am obviously getting power from the battery. > (The battery is new.) But nothing else happens. Not even a click from > the starter. After some time passes, between 5 minutes and a couple of > hours, it will start again. The only thing I've noticed in common with > the situations in which it won't start is that it has always been > driven within 1-3 hours. It always starts in the morning or when it has > sat longer. I don't think it is weather related, as our summer > (southeast US) has been inordinately cool. > > Two different mechanics have looked at it and tried to get it to fail, > and of course it won't. I've been told it could be anything between the > ignition, wiring, and starter, and both are reluctant to do > investigatory work. > > It currently does appear to have a wiring problem; when I turn on the > headlights, the arrow in the dashboard for the left turn signal lights > up and stays lit, and the turn signal doesn't work. It isn't the bulb. > It is only because of this problem that the second mechanic has agreed > to look at the situation, in case the problems are related. > > I may be at the point where I have to pay for them to start switching > out parts. I don't have complete records on the car's history. My > question is, what is statistically the most likely part in this area to > have failed on this 30 year old car? > > Thanks for any tips, > > Amanda |
#4
|
|||
|
|||
Amanda Robin wrote:
> I drive as my primary car a 1974 Olds Cutlass. I am only the second > owner and it has 66,000 miles on it. It had less than 40,000 on it when > I got it a few years ago. It is the envy of many young people in my > town! > > Anyway, it has developed an intermittent starting problem. About 5 > times now over 3 months it has failed to start. When I turn the key, > the dash lights up and I am obviously getting power from the battery. > (The battery is new.) But nothing else happens. Not even a click from > the starter. After some time passes, between 5 minutes and a couple of > hours, it will start again. The only thing I've noticed in common with > the situations in which it won't start is that it has always been > driven within 1-3 hours. It always starts in the morning or when it has > sat longer. I don't think it is weather related, as our summer > (southeast US) has been inordinately cool. The usual list of suspects a 1. Bad connection on battery to battery cable or battery cable to starter. 2. Bad battery cable. 3. Bad starter solenoid. 3. Problems related to the starter relay. > > Two different mechanics have looked at it and tried to get it to fail, > and of course it won't. I've been told it could be anything between the > ignition, wiring, and starter, and both are reluctant to do > investigatory work. > > It currently does appear to have a wiring problem; when I turn on the > headlights, the arrow in the dashboard for the left turn signal lights > up and stays lit, and the turn signal doesn't work. It isn't the bulb. > It is only because of this problem that the second mechanic has agreed > to look at the situation, in case the problems are related. > > I may be at the point where I have to pay for them to start switching > out parts. I don't have complete records on the car's history. My > question is, what is statistically the most likely part in this area to > have failed on this 30 year old car? > > Thanks for any tips, > > Amanda |
#5
|
|||
|
|||
Threeducks responds:
>Amanda Robin wrote: >> I drive as my primary car a 1974 Olds Cutlass. I am only the second >> owner and it has 66,000 miles on it. It had less than 40,000 on it when >> I got it a few years ago. It is the envy of many young people in my >> town! >> >> Anyway, it has developed an intermittent starting problem. About 5 >> times now over 3 months it has failed to start. When I turn the key, >> the dash lights up and I am obviously getting power from the battery. >> (The battery is new.) But nothing else happens. Not even a click from >> the starter. After some time passes, between 5 minutes and a couple of >> hours, it will start again. The only thing I've noticed in common with >> the situations in which it won't start is that it has always been >> driven within 1-3 hours. It always starts in the morning or when it has >> sat longer. I don't think it is weather related, as our summer >> (southeast US) has been inordinately cool. > >The usual list of suspects a > >1. Bad connection on battery to battery cable or battery cable to starter. >2. Bad battery cable. >3. Bad starter solenoid. >3. Problems related to the starter relay. > > Years ago, I had, IIRC, a '78 Olds that did similar things. The starter solenoid was placed too close to the exhaust manifold, so after it got some age on it, heat would cause it to fail--temporarily. Have the mechanics try heating the solenoid to see if it quits working. Charlie Self "A judge is a law student who marks his own examination papers." H. L. Mencken |
#6
|
|||
|
|||
Amanda Robin wrote in rec.autos.tech
> I may be at the point where I have to pay for them to start switching > out parts. I don't have complete records on the car's history. My > question is, what is statistically the most likely part in this area to > have failed on this 30 year old car? Statistically, it is the same for all cars, of all ages. An intermittant problem can be a bear to track down. Especially since it happens once every few weeks. You won't know if you fixed it until the problems occurs again, and then it may be something else. Even though it appears to you that the battery and cables are good, that does not mean they are. A poor, or weak, connection can do exactly what you are describing. The battery cables need to be pulled and connections cleaned. Other possible problems are the ignition switch, and solenoid/starter. Plus any safety switch on the transmission. The best time to check would be when it is happening. Someone could crawl around the car and look for problems while you try to start the car. -- Dick #1349 "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." ~Benjamin Franklin Home Page: dickcr.iwarp.com email: |
#7
|
|||
|
|||
Amanda Robin wrote: > > Thanks for any tips, Does the car have a separate solenoid switch, or is the switch built into the starter? If it's separate from the starter, you will be able to bypass it (this is called "jumping" the switch). You will also be able to bypass the ignition switch. Jumping the solenoid will tell you if the solenoid is bad. Jumping the ignition switch will tell you if the ignition switch is bad. Unfortunately, many GM cars built the solenoid into the starter; *if that's the case with the Cutlass, the following techniques will not work*. The solenoid is a cylinder about the size of a baby's fist. It has two cables about 1/2" thick and either one or two small wires attached to it. One of the heavy cables is connected to the battery and the other to the starter. One of the small wires runs to the ignition switch. When you try to start the car, current flows through the small wires. This activates an electromagnet in the switch, which connects the starter to the battery. You bypass the solenoid switch with an extra battery cable. Your first step is to loosen and clean all electrical connections at the solenoid, battery, and starter and retighten them. Buy an extra battery cable long enough to reach from the starter to the battery. You will also need a short piece of 16 gauge wire long enough to reach the solenoid switch from a good ground. The next time the car won't start, run some tests. First test the ignition switch. In some cases, the ignition switch provides power to the solenoid magnet; in other designs, it will complete the circuit to ground. Usually, the switch ignition grounds the circuit. If you have one small wire, this will have no power on it and will run to the ignition switch. Hook your 16 gauge wire to ground and touch it to the terminal on the solenoid; if the starter turns over, the problem is in your ignition switch. If you have two small wires to the solenoid, usually one runs to the switch and the other is a power lead. Use an electrical circuit tester to determine which wire is hot. Hook your 16 gauge wire to ground and touch it to the other terminal on the solenoid; if the starter turns over, the problem is in your ignition switch. If the ignition tests good, jump the solenoid. Touch one end of your extra battery cable to the cable from the car battery and the other end to the cable to the starter (I used to use a set of Channel-lock pliers and gloves to do this). If the starter turns over, replace the solenoid switch. If the starter doesn't turn over, touch one end of your extra battery cable to the positive pole of the battery and the other end to the cable to the starter. If the starter turns over, replace the battery cable to the solenoid. If the starter doesn't turn over, touch one end of your extra battery cable to the positive pole of the battery and the other end to the terminal on the starter. If the starter turns over, replace the battery cable to the solenoid and the starter cable. I would also replace the solenoid if I had to replace either of the cables. If the starter doesn't turn over when connected directly to the battery in this way, the problem is in the starter. George Patterson If you want to know God's opinion of money, just look at the people he gives it to. |
#8
|
|||
|
|||
Your turn signal problem can be traced to
a bad ground on either the left front or left rear signal indicator lamps. It's probably a dual filament design. When the ground goes bad, the current will flow back through the indicator in the dash. Because the ground is bad, you cannot get enough current flow to heat up the bi-metal strip in the flasher, therefore your left turn signal doesn't work. If I'm right, your indicator lamps are mounted in a metal bumper. Removing them and cleaning up the mounting points usually fixes this problem. |
#9
|
|||
|
|||
G.R. Patterson III wrote in rec.autos.tech
> > > Does the car have a separate solenoid switch, or is the switch built > into the starter? AFAIK, only Ford Motors use a separate solenoid. All other cars that I have seen, including GM, Chrysler, VW's, almost all Japanese cars, use a solenoid mounted on the starter. And the way I have jumped those things was to either put power to the small wire to activate it, or grab a screw driver and jump the 2 large connectors, bypassing all the wiring between the battery and the solenoid, including any safety switches and the ignition switch. Of course, you have to be sure the car is not in gear before doing this. -- Dick #1349 "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." ~Benjamin Franklin Home Page: dickcr.iwarp.com email: |
#10
|
|||
|
|||
Robin Banks wrote in rec.autos.tech
> On Fri, 03 Sep 2004 10:50:05 -0500, Dick C > wrote: > >> Of course, you have to be sure the car is not in >> gear before doing this. > > But that takes all the excitement out of it. ;-) I found that I could handle that level of excitement once.:-0 -- Dick #1349 "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." ~Benjamin Franklin Home Page: dickcr.iwarp.com email: |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New *FREE* Corvette Discussion Forum | JLA ENTERPRISES TECHNOLOGIES INTEGRATION | Corvette | 12 | November 30th 04 06:36 PM |
Help Re. Audi A4 starting problem - ?immobiliser or ignition barrel | Gary Murison | Audi | 5 | September 27th 04 02:24 PM |
95 Dodge Neon SOHC Starting problem | Franko | Dodge | 4 | August 6th 04 07:39 PM |
1999 Intrepid starting problem | WKJ | Dodge | 2 | June 14th 04 07:42 PM |