If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Paint Damage on 156
What you are most likely experiencing is the result of indusrial fallout
(IFO) or rail dust. The most common sources are emmissions from Factories (Auto MFG), Rail Dust from the trains that trans. the vehicles. or Brake Dust. that attaches itself to the surface (+)(-) attraction. Once on the surface this contaminate begins to corrode and embed itself in the paint file. You will notice rust rings, pitting in the paint, and even blistering in the paint. The only universally recognized corrective step is 1119/883 paint decontamination system manufactured by Finish Kare. You can get more information about this at www.FK1USA.com This is message not ment to advertise but to inform. |
Ads |
Thread Tools | |
Display Modes | |
|
|